The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-10-2018, 10:47 PM   #1
Robznob11
Senior Member
 
Robznob11's Avatar
 
Join Date: Feb 2004
Location: brownfield texas (west texas)
Posts: 1,750
Drop down panhard bar mount

Hey all, does anyone know where to buy a drop down panhard bar mount ? I just installed a 9 and the straight bar wont work. I know I could run a bent bar but it seems a drop down would be about the same price and probably better geometry for a bagged truck.
Thanks for the help!
__________________
67 short fleet, bagged! W/ 3in body drop , 6.0/4l80e lsx, 3800 billet LU stall, 42# inj, sinister cam 230/236 .591/.601 110*lsa,brian tooley pushrods,prc 1518 springs, full tune, racetronix FP w/ HW kit , 1 3/4 stainless full length headers, 3" exhaust w/x and dynomax bullets, narrowed QP 9", moser chunk, 4:11 gears and 35 spline axles,w/ 345x55x15 drag radials on the back!
........................ ___
.........________//__{\_____
,,,,,,,/__(⊙)___//___/__(O)_/

@disciple2.rc 💪instagram💪
Robznob11 is offline   Reply With Quote
Old 03-14-2018, 07:57 AM   #2
drfloyd
Registered User
 
Join Date: Sep 2015
Location: Scranton, SC
Posts: 253
Re: Drop down panhard bar mount

How much drop do you need? Rob at No Limit could probably make you one if they don't have one in stock. I didn't use a drop on mine but my mount on the housing is spaced away from the housing so that it clears.
drfloyd is offline   Reply With Quote
Old 03-14-2018, 08:56 AM   #3
Robznob11
Senior Member
 
Robznob11's Avatar
 
Join Date: Feb 2004
Location: brownfield texas (west texas)
Posts: 1,750
Re: Drop down panhard bar mount

I ended up ordering the cpp bent bar, but I still think it would be a better set up with about a 4" drop on the frame Mount.
__________________
67 short fleet, bagged! W/ 3in body drop , 6.0/4l80e lsx, 3800 billet LU stall, 42# inj, sinister cam 230/236 .591/.601 110*lsa,brian tooley pushrods,prc 1518 springs, full tune, racetronix FP w/ HW kit , 1 3/4 stainless full length headers, 3" exhaust w/x and dynomax bullets, narrowed QP 9", moser chunk, 4:11 gears and 35 spline axles,w/ 345x55x15 drag radials on the back!
........................ ___
.........________//__{\_____
,,,,,,,/__(⊙)___//___/__(O)_/

@disciple2.rc 💪instagram💪
Robznob11 is offline   Reply With Quote
Old 03-14-2018, 05:19 PM   #4
68c10airstream
Senior Member
 
68c10airstream's Avatar
 
Join Date: Mar 2013
Location: Marquette michigan
Posts: 798
Re: Drop down panhard bar mount

My 68 c10 got a ford 9" and i installed a porterbuilt pan hard bar kit including a new frame mount. I'm running 4" drop ece springs with 1" lowering blocks, 18" wheels and the bar sits horizontal and parallel to the rear end.
68c10airstream is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com