The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-31-2014, 10:23 PM   #1
JointTech
Registered User
 
JointTech's Avatar
 
Join Date: Feb 2012
Location: Mission Viejo, CA
Posts: 1,856
non tilt steering column refurb links

anybody have any good links to disassembly/reassembly of a 72 non tilt auto steering column? Lots of pictures and idiot proof type stuff

I searched here and google but didnt find something as good as this one is for drum brakes. http://www.pbase.com/nufsed/drumbrake
__________________
72 C20 Long Bed
SB350 TH400 14 bolt rear end
Extremely boring build thread
JointTech is offline   Reply With Quote
Old 05-31-2014, 10:25 PM   #2
68bowtie
Senior Member
 
68bowtie's Avatar
 
Join Date: Jan 2007
Location: Turlock, CA
Posts: 4,060
Re: non tilt steering column refurb links

id like to see that too.
__________________
"if a job's worth doing, it's worth doing well"

my build thread "c10 fever":
http://67-72chevytrucks.com/vboard/s...d.php?t=686732
factory options: 1968 swb, black, 396 big block, auto, custom cab, power steering, wood floor, tinted windows, air conditioning, front stabilizer, full wheel covers, front/rear chrome bumpers
68bowtie is offline   Reply With Quote
Old 06-01-2014, 01:12 AM   #3
70blackfish
Senior Member
 
Join Date: Oct 2012
Location: Newhall CA
Posts: 1,139
Re: non tilt steering column refurb links

bump for u
__________________
69 GMC SWB
70blackfish is offline   Reply With Quote
Old 06-01-2014, 07:44 AM   #4
Boog
primer is finer
 
Boog's Avatar
 
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 7,034
Re: non tilt steering column refurb links

Here is a thread covering most of what you want.

http://67-72chevytrucks.com/vboard/s...90#post4755990

and this parts diagram.
Attached Images
 
__________________
Boog
69 Chevy stepside, 358/T350, 4.10 posi, 4.5/4 drop, rallys, poboy driver
09 Yukon SLT 4wd, 06 GMC crewcab Z71 5.3, 4.10
All GM..'nuff said,
Member of Jr Nation 88

I stand for the flag and kneel at the cross

Last edited by Boog; 06-01-2014 at 07:57 AM.
Boog is offline   Reply With Quote
Old 06-01-2014, 01:20 PM   #5
leftybass209
Registered User
 
leftybass209's Avatar
 
Join Date: Feb 2011
Location: Modesto, CA
Posts: 2,066
Re: non tilt steering column refurb links

I just followed that picture 2 days ago building my non tilt. It was really easy. The only thing I didn't disassemble was the shift tube mechanism with the dual springs and arm at the bottom. Mine was pretty smooth, so I just hosed it down with some cleaner and wire brushed it. The assembly itself is straight forward, the hardest part is clocking the turn signal housing. The way I made sure it was on right was mocking up the shift indicator and having the shift tube in park.
leftybass209 is offline   Reply With Quote
Old 06-01-2014, 08:53 PM   #6
JointTech
Registered User
 
JointTech's Avatar
 
Join Date: Feb 2012
Location: Mission Viejo, CA
Posts: 1,856
Re: non tilt steering column refurb links

that link looks pretty helpful, thanks. Maybe Ill make one as good as the drum brake guy not sure I have the patience though.
__________________
72 C20 Long Bed
SB350 TH400 14 bolt rear end
Extremely boring build thread
JointTech is offline   Reply With Quote
Old 06-07-2014, 06:56 AM   #7
JointTech
Registered User
 
JointTech's Avatar
 
Join Date: Feb 2012
Location: Mission Viejo, CA
Posts: 1,856
Re: non tilt steering column refurb links

ok well start from the bottom and see if I can be disciplined enough to keep taking pictures.

start by putting the new boot onto the Lower steering shaft #26. these can be gotten from wes at classic heartbeat and inline tube has them as well.
This boot is inside #25 the intermediate coupling.
the clip ring is a pain to get on but keep fighting it and third hand helps.


put on your square end nut things and the little clippy deal that goes on top.


Grease the crap out of it. I used high temp grease because thats what I had handy. I gooed up the end including inside those square nuts.


Then fill the coupler with the same grease.


Then slide the shaft into the coupler. it only goes one way.


Then put in the clip ring to hold the gasket in place. Put the non bent side in first. you can see the clip has a rise so it can go back over itself.


more to come...
__________________
72 C20 Long Bed
SB350 TH400 14 bolt rear end
Extremely boring build thread
JointTech is offline   Reply With Quote
Old 06-11-2014, 06:08 AM   #8
JointTech
Registered User
 
JointTech's Avatar
 
Join Date: Feb 2012
Location: Mission Viejo, CA
Posts: 1,856
Re: non tilt steering column refurb links

put your grommets on the main column.


Fuzzy felt thing goes on the shift tube.


Install #2 and #3 Shift housing bushing and seat. Metal one goes in first.


I greased it. The bushing fits in the notch as seen here.


Slide the shift tube into the main tube.


Align the lever so it fits into the notch in the main tube.


You can see the tang for the neutral safety switch in the notch on the column.


youll see the hole for the shift lever as well.


I also lubed up the shift tube and springs.


attach the strap and 3 bolts to hold the shift tube in place.


Lube the upper steering shaft and stick it in. the notched end goes towards the bottom.


Lower bearing setup


Install the adjusting ring.


Put on the bearing and spring and washer.


Attach coupling clamp to the upper shaft.


feed the turn signal switch wire through the shift lever housing and turn signal housing.


Rubber ring and Plastic thrust washer. #39 and #40


goes here. The tang fits one way.


Line up the hazard or turn signal handle with the holes in the housing
__________________
72 C20 Long Bed
SB350 TH400 14 bolt rear end
Extremely boring build thread
JointTech is offline   Reply With Quote
Old 06-11-2014, 12:02 PM   #9
leftybass209
Registered User
 
leftybass209's Avatar
 
Join Date: Feb 2011
Location: Modesto, CA
Posts: 2,066
Re: non tilt steering column refurb links

Everything looks good! Did you have the metal retaining ring on the column tube before assembly? I didn't see it and it may be that you didn't get a clear picture of it. I put mine on backwards the first time.
leftybass209 is offline   Reply With Quote
Old 06-11-2014, 01:09 PM   #10
trkfrk
Registered User
 
trkfrk's Avatar
 
Join Date: Jul 2010
Location: Las Vegas, NV
Posts: 940
Re: non tilt steering column refurb links

Subscribed, great pics.
__________________
Mark

1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20"

My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609.

My first start up http://youtu.be/R899YQ1OcjU
trkfrk is offline   Reply With Quote
Old 06-11-2014, 01:54 PM   #11
JointTech
Registered User
 
JointTech's Avatar
 
Join Date: Feb 2012
Location: Mission Viejo, CA
Posts: 1,856
Re: non tilt steering column refurb links

Quote:
Originally Posted by leftybass209 View Post
Everything looks good! Did you have the metal retaining ring on the column tube before assembly? I didn't see it and it may be that you didn't get a clear picture of it. I put mine on backwards the first time.
doh... well 3 times is the charm. Ill get a pic of that and swap out the gasket picture above.
__________________
72 C20 Long Bed
SB350 TH400 14 bolt rear end
Extremely boring build thread
JointTech is offline   Reply With Quote
Old 12-16-2017, 02:09 PM   #12
Richard2112
Registered User
 
Join Date: Jul 2014
Location: Wichita, Ks
Posts: 203
Re: non tilt steering column refurb links

Interesting. I just destroyed my toe pan seal pushing the column through it. Guess that's not how it's done. Bet O'reillys doesn't have one. Duh!
Richard2112 is offline   Reply With Quote
Old 02-06-2018, 02:54 PM   #13
Jason's '72
Registered User
 
Jason's '72's Avatar
 
Join Date: Jan 2014
Location: Victorville, CA
Posts: 11
Re: non tilt steering column refurb links

Any idea where I can get parts for my steering column? Specifically, item #39, the rubber ring that interfaces with the plastic thrust washer (#40)? I checked Classic Parts, Classic Industries, LMC, Napa, all with no results.
Jason's '72 is offline   Reply With Quote
Old 02-11-2018, 10:16 PM   #14
SabbathFanatic
Registered User
 
SabbathFanatic's Avatar
 
Join Date: Nov 2017
Location: Denver, CO
Posts: 30
Re: non tilt steering column refurb links

I have the same question as Jason. I'm looking for 39 AND 40.
__________________
1971 C10 - LQ4/4L80E swap in progress
1988 K3500 - 8.1 swap planned
SabbathFanatic is offline   Reply With Quote
Old 02-12-2018, 12:34 AM   #15
Gromit
Registered User
 
Join Date: Jul 2015
Location: Central Coast, CA
Posts: 470
Re: non tilt steering column refurb links

OMG those photos are so helpful.. thank you JointTech!
Gromit is offline   Reply With Quote
Old 02-12-2018, 01:03 AM   #16
slikside
Registered User
 
slikside's Avatar
 
Join Date: Jun 2010
Location: San Diego Co.
Posts: 984
Re: non tilt steering column refurb links

Sub'd...

Nice write-up!

Thanks JT
__________________
1972 Chevy C-10, SWB, Fleet, 350/350, PS, PB, all stock, Survivor.
slikside is offline   Reply With Quote
Old 02-12-2018, 01:31 PM   #17
67chevemall
Registered User
 
67chevemall's Avatar
 
Join Date: Apr 2003
Location: Niagara
Posts: 3,090
Re: non tilt steering column refurb links

This will be a great help.
Thanks
__________________
1967 Chevy C/10 327, 3spd, fleetside lwb.
1967 Chev C/10 step, 383, M21. SOLD
2013 YZ250
1994 BMW 540i6
67chevemall is offline   Reply With Quote
Old 02-12-2018, 10:51 PM   #18
Baker72chevy
Registered User
 
Join Date: Apr 2013
Location: jefferson,georgia
Posts: 145
Re: non tilt steering column refurb links

Just rebuilt my column this weekend my first built
Attached Images
 
Baker72chevy is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com