WTB Choke Thermostat for 69 Rochester 2GV on 307 V8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69TowRig · 11-09-2005, 02:12 AM

All righty then. I have hit up all the parts stores, resto places, etc. No one has this thing, it has passed into obsolecense.

I need the choke thermostat (bimetallic coil), choke stove (cover), and the linkage if you have it. This is the divorced (mounts on intake manifold) choke for the Rochester 2GV carburetor on my '69 with 307 V8.

Attached is a pic of where it goes. You can see the screw holes and one screw left in there:

Pilgrim · 11-09-2005, 01:56 PM

I have bought the coils from LMC and NAPA. I have bought the choke covers from other vendors. I have made the rod from coat hangers. When you go to NAPA you have to use part numbers from their 1971 parts book. They have none older unless you ar lucky enough to find one that has kept the old books. If all else fials, try calling the NAPA store in Randolph, Vermont or the one in Lebanon, Newhampshire.
Good luck.

incoma · 11-09-2005, 02:48 PM

I bought one from NAPA about 8 years ago. If you don't have any luck with them, I'll see if I still have the receipt and part number.

jhow66 · 11-09-2005, 04:56 PM

Here is what you need:
http://www.napaonline.com/cgi-bin/nc...grpid=53292269

69TowRig · 11-09-2005, 05:23 PM

Quote:

Originally Posted by jhow66

Here is what you need:
http://www.napaonline.com/cgi-bin/nc...grpid=53292269

NAPA no longer carries that. They gave me a huge list of cross-references of different brands of parts that have all come back as obsolete. They said that the number was good but no DCs carry it and therefore they cannot order it. I have checked O'Reilly's, AutoZone, Carquest, etc.

The NAPA CRB2293 crosses with:
Wells E603 (obsolete)
Standard CV11 (obsolete)
Borg Warner TH11 (obsolete)

No one can get these things. Even LMC's listing only shows 71-72. To me it appears that the base is different on the one I need as compared to the only one I have found online (it has only one mounting hole, my manifold has two that flank the coil spring).

I will probably end up building some sort of adapter plate to mount a different one, or if I can buy some sort of electric choke that will divorce mount I might do that. I had wanted to take it back to stock but it looks like that might be impossible.

Doesn't anyone still run this carburetor?

**uncle** · 11-09-2005, 06:44 PM

I have 1 but did not run the engine.

jhow66 · 11-09-2005, 11:17 PM

Electric chokes:
http://www.carbsonly.com/carbs/carbschoke1.htm

**Richard** · 11-10-2005, 02:28 AM

Check with a speedshop Edelbrock makes them, they purchased all the molds and rights from GM for the Qjets. The divorced choke and cover are sold separately. I am sure the online places like Jegs carry them as well.

**uncle** · 11-10-2005, 04:38 PM

I forgot I have one on a running engine if you interested.

69TowRig · 11-12-2005, 12:52 PM

Quote:

Originally Posted by uncle

I forgot I have one on a running engine if you interested.

PMing you.

I went ahead and ordered the newer style for 71-72 as well, will probably have to adapt it. I will update when I get it.

Quote:

Originally Posted by 70STOVEBOLT

Did they ever use a divorced choke on a straight six? I have a hand choke on mine and I hate it. I would like to put a divorced choke on if possible.

No idea but I don't see why you couldn't fab something up. I was simply hoping to get a bolt-in part without doing any fab work but things don't always work out like that.

*bisquik65* · 11-12-2005, 09:43 PM

I have one here if you can use it...$20 shipped for the whole carb.

**70STOVEBOLT** · 11-10-2005, 05:25 PM

Did they ever use a divorced choke on a straight six? I have a hand choke on
mine and I hate it. I would like to put a divorced choke on if possible.

11-09-2005, 02:12 AM	#1
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	WTB Choke Thermostat for 69 Rochester 2GV on 307 V8 All righty then. I have hit up all the parts stores, resto places, etc. No one has this thing, it has passed into obsolecense. I need the choke thermostat (bimetallic coil), choke stove (cover), and the linkage if you have it. This is the divorced (mounts on intake manifold) choke for the Rochester 2GV carburetor on my '69 with 307 V8. Attached is a pic of where it goes. You can see the screw holes and one screw left in there: __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

11-09-2005, 01:56 PM	#2
Pilgrim Registered User Join Date: Mar 2003 Location: Crescent City, FL Posts: 492	Re: WTB Choke Thermostat for 69 Rochester 2GV on 307 V8 I have bought the coils from LMC and NAPA. I have bought the choke covers from other vendors. I have made the rod from coat hangers. When you go to NAPA you have to use part numbers from their 1971 parts book. They have none older unless you ar lucky enough to find one that has kept the old books. If all else fials, try calling the NAPA store in Randolph, Vermont or the one in Lebanon, Newhampshire. Good luck. __________________ Bob 68 C20 Camper Special

11-09-2005, 02:48 PM	#3
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: WTB Choke Thermostat for 69 Rochester 2GV on 307 V8 I bought one from NAPA about 8 years ago. If you don't have any luck with them, I'll see if I still have the receipt and part number.

11-09-2005, 04:56 PM	#4
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: WTB Choke Thermostat for 69 Rochester 2GV on 307 V8 Here is what you need: http://www.napaonline.com/cgi-bin/nc...grpid=53292269 __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

11-09-2005, 06:44 PM	#6
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,283	Re: WTB Choke Thermostat for 69 Rochester 2GV on 307 V8 I have 1 but did not run the engine.

11-09-2005, 11:17 PM	#7
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: WTB Choke Thermostat for 69 Rochester 2GV on 307 V8 Electric chokes: http://www.carbsonly.com/carbs/carbschoke1.htm __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

11-10-2005, 02:28 AM	#8
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,692	Re: WTB Choke Thermostat for 69 Rochester 2GV on 307 V8 Check with a speedshop Edelbrock makes them, they purchased all the molds and rights from GM for the Qjets. The divorced choke and cover are sold separately. I am sure the online places like Jegs carry them as well. __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

11-10-2005, 04:38 PM	#9
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,283	Re: WTB Choke Thermostat for 69 Rochester 2GV on 307 V8 I forgot I have one on a running engine if you interested.

11-12-2005, 09:43 PM	#11
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Re: WTB Choke Thermostat for 69 Rochester 2GV on 307 V8 I have one here if you can use it...$20 shipped for the whole carb. Attached Images

11-10-2005, 05:25 PM	#12
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: WTB Choke Thermostat for 69 Rochester 2GV on 307 V8 Did they ever use a divorced choke on a straight six? I have a hand choke on mine and I hate it. I would like to put a divorced choke on if possible.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.