OR 1972 Cheyenne 3/4 4x4 A/C ($6,250) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ddc456** · 09-17-2018, 02:32 PM

This is a complete put together running project and I kind of still have intentions of restoring this pickup because of how complete it is and how rust free this pickup is. I am in no huge hurry to sell, and unless the right buyer comes along i'll just hold on to it and get to it some day. But my head and energy is in finishing my 78 one ton crew cab, and rather than the 72' sit for the next few years I'd rather see someone get started on it...... But this is a true 72' 3/4 ton 4x4 A/C th350 w/ 205 and a Dana 44 in the front. The original color is medium bronze w/ a white top. Please refer to the SPID for the list of features.

The pickup is missing the original 350 engine, but does have a very solid running 396 w/ a new carb, HEI, plugs and wires. The 396 originally came out of a 66' Chevelle (based on the stamping on the deck) but somewhere along the line the 396 must have been rebuilt, it runs to strong to be all original. The transmission seems to be slipping, not sure if it's the torq converter or possible the trans, but that probably needs to be gone through. Both the front and rear axles need to be resealed, the diff covers have a little leak, but other than that, they seem to be good to go. The truck fires up every time, pump it 2-3 times and turn the key. It does move under it's own power you can just feel the trans slipping.

There is very little rust in the pickup, and i mean very little! This was the a number one reason why i bought it. The passenger side front fender in the very lower front corner needs to be cut out and replaced (battery tray and inner fender as well). On the passenger side, the lower cab corner needs to be cut out and fixed. Next would be a few small areas of the passenger side rocker, i don't think the whole thing needs to be cut out and replaced, just a few little patches. The floors are dead perfect, the gutter above the front windshield is dead perfect (still has the original seem sealer in the channel) Please see the pictures, this pickup is extremely dry! I can't stress that enough. The top of the cab needs to have a few small dents pulled, something must have fallen on it at one point. Oh and it's going to need a new tail gate, this one is shot.

The one little negative is, in front the motor mount on the passenger side the frame has a slight bend in it. Talking to a buddy of mine that owns a body shop he said this is a very simple fix to straighten this out, it's really not that bad, i just want to be up front and honest. I'll get some pictures of that tonight so everyone can see it. Oh and of course, someone must of thought of painting the truck yellow, so at one point the inside of the cab was repainted....

I do have few extra parts that come with the pickup. I have a perfect drivers side fender (not that it's really needed but it goes with the truck), original RV mirrors, (4) 16 inch 8 lug steel wheels, original hub caps.

I have a clean and clear title. This pickup is a solid start to a project and won't take much to get it on the road and fix as you go. I am an open book, if anyone has questions or concerns please give me a call or shoot me an email.
Thanks Doug
Phone Number 541-948-1166
email: dougcox0236@gmail.com

https://photos.app.goo.gl/2AGr2LMBQH8jBCv99
https://photos.app.goo.gl/raUrzDMhwrtg4hPQ9
https://photos.app.goo.gl/BUBTFJtswiG8B2VE8
https://photos.app.goo.gl/4DiRZ2R8xsm6RjyXA
https://photos.app.goo.gl/Bca546gfapo3kfnP7
https://photos.app.goo.gl/8X9YbgiXzUcFkiYv5
https://photos.app.goo.gl/brwEz4tZ9c88zmDG8
https://photos.app.goo.gl/jZLzjep4tg1cYR9s6
https://photos.app.goo.gl/YaQK69nvEMu2LXiq5
https://photos.app.goo.gl/WVWX4EcEWXfKVUmo8
https://photos.app.goo.gl/ShnAi8Pj5StPtk967
https://photos.app.goo.gl/9KuV7odDvESzsho76
https://photos.app.goo.gl/iLo4G5HtGaxdo6zJA
https://photos.app.goo.gl/thZqj1TzmHfUv5m87
https://photos.app.goo.gl/ssnRopUbJR3ziNtr7
https://photos.app.goo.gl/8MiqtYgzB4nc7aYn9
https://photos.app.goo.gl/FronFBmaeky7fhrz7
https://photos.app.goo.gl/zns533oVGsYhHfmv7
https://photos.app.goo.gl/bjYfybKDPYf5b3UeA
https://photos.app.goo.gl/E44kn9BANwoB4sFm7

**ddc456** · 09-17-2018, 02:40 PM

Sorry i tired to link the photos differently.

ruquik · 09-18-2018, 10:23 PM

Please send pics to info@camaroconcepts.com interested in this truck

**ddc456** · 09-19-2018, 02:04 PM

Emails sent with pics. Let me know if you have any questions.

**ddc456** · 09-25-2018, 07:50 PM

just listed the truck on ebay......

https://www.ebay.com/itm/1972-Chevro...xbqr1M&vxp=mtr

**Super Dude** · 10-04-2018, 11:38 PM

Did this sell on ebay?

09-17-2018, 02:32 PM	#1
ddc456 Active Member Join Date: Jan 2014 Location: Bend Oregon Posts: 163	1972 Cheyenne 3/4 4x4 A/C ($6,250) This is a complete put together running project and I kind of still have intentions of restoring this pickup because of how complete it is and how rust free this pickup is. I am in no huge hurry to sell, and unless the right buyer comes along i'll just hold on to it and get to it some day. But my head and energy is in finishing my 78 one ton crew cab, and rather than the 72' sit for the next few years I'd rather see someone get started on it...... But this is a true 72' 3/4 ton 4x4 A/C th350 w/ 205 and a Dana 44 in the front. The original color is medium bronze w/ a white top. Please refer to the SPID for the list of features. The pickup is missing the original 350 engine, but does have a very solid running 396 w/ a new carb, HEI, plugs and wires. The 396 originally came out of a 66' Chevelle (based on the stamping on the deck) but somewhere along the line the 396 must have been rebuilt, it runs to strong to be all original. The transmission seems to be slipping, not sure if it's the torq converter or possible the trans, but that probably needs to be gone through. Both the front and rear axles need to be resealed, the diff covers have a little leak, but other than that, they seem to be good to go. The truck fires up every time, pump it 2-3 times and turn the key. It does move under it's own power you can just feel the trans slipping. There is very little rust in the pickup, and i mean very little! This was the a number one reason why i bought it. The passenger side front fender in the very lower front corner needs to be cut out and replaced (battery tray and inner fender as well). On the passenger side, the lower cab corner needs to be cut out and fixed. Next would be a few small areas of the passenger side rocker, i don't think the whole thing needs to be cut out and replaced, just a few little patches. The floors are dead perfect, the gutter above the front windshield is dead perfect (still has the original seem sealer in the channel) Please see the pictures, this pickup is extremely dry! I can't stress that enough. The top of the cab needs to have a few small dents pulled, something must have fallen on it at one point. Oh and it's going to need a new tail gate, this one is shot. The one little negative is, in front the motor mount on the passenger side the frame has a slight bend in it. Talking to a buddy of mine that owns a body shop he said this is a very simple fix to straighten this out, it's really not that bad, i just want to be up front and honest. I'll get some pictures of that tonight so everyone can see it. Oh and of course, someone must of thought of painting the truck yellow, so at one point the inside of the cab was repainted.... I do have few extra parts that come with the pickup. I have a perfect drivers side fender (not that it's really needed but it goes with the truck), original RV mirrors, (4) 16 inch 8 lug steel wheels, original hub caps. I have a clean and clear title. This pickup is a solid start to a project and won't take much to get it on the road and fix as you go. I am an open book, if anyone has questions or concerns please give me a call or shoot me an email. Thanks Doug Phone Number 541-948-1166 email: dougcox0236@gmail.com https://photos.app.goo.gl/2AGr2LMBQH8jBCv99 https://photos.app.goo.gl/raUrzDMhwrtg4hPQ9 https://photos.app.goo.gl/BUBTFJtswiG8B2VE8 https://photos.app.goo.gl/4DiRZ2R8xsm6RjyXA https://photos.app.goo.gl/Bca546gfapo3kfnP7 https://photos.app.goo.gl/8X9YbgiXzUcFkiYv5 https://photos.app.goo.gl/brwEz4tZ9c88zmDG8 https://photos.app.goo.gl/jZLzjep4tg1cYR9s6 https://photos.app.goo.gl/YaQK69nvEMu2LXiq5 https://photos.app.goo.gl/WVWX4EcEWXfKVUmo8 https://photos.app.goo.gl/ShnAi8Pj5StPtk967 https://photos.app.goo.gl/9KuV7odDvESzsho76 https://photos.app.goo.gl/iLo4G5HtGaxdo6zJA https://photos.app.goo.gl/thZqj1TzmHfUv5m87 https://photos.app.goo.gl/ssnRopUbJR3ziNtr7 https://photos.app.goo.gl/8MiqtYgzB4nc7aYn9 https://photos.app.goo.gl/FronFBmaeky7fhrz7 https://photos.app.goo.gl/zns533oVGsYhHfmv7 https://photos.app.goo.gl/bjYfybKDPYf5b3UeA https://photos.app.goo.gl/E44kn9BANwoB4sFm7 Last edited by ddc456; 09-17-2018 at 02:47 PM. Reason: adding pictures

09-17-2018, 02:40 PM	#2
ddc456 Active Member Join Date: Jan 2014 Location: Bend Oregon Posts: 163	Re: 1972 Cheyenne 3/4 4x4 A/C ($6,250) Sorry i tired to link the photos differently.

09-18-2018, 10:23 PM	#3
ruquik Registered User Join Date: Apr 2008 Location: Houston Texas Posts: 24	Re: 1972 Cheyenne 3/4 4x4 A/C ($6,250) Please send pics to info@camaroconcepts.com interested in this truck

09-19-2018, 02:04 PM	#4
ddc456 Active Member Join Date: Jan 2014 Location: Bend Oregon Posts: 163	Re: 1972 Cheyenne 3/4 4x4 A/C ($6,250) Emails sent with pics. Let me know if you have any questions.

09-25-2018, 07:50 PM	#5
ddc456 Active Member Join Date: Jan 2014 Location: Bend Oregon Posts: 163	Re: 1972 Cheyenne 3/4 4x4 A/C ($6,250) just listed the truck on ebay...... https://www.ebay.com/itm/1972-Chevro...xbqr1M&vxp=mtr

10-04-2018, 11:38 PM	#6
Super Dude Active Member Join Date: Sep 2018 Location: Springfield Oregon Posts: 112	Re: 1972 Cheyenne 3/4 4x4 A/C ($6,250) Did this sell on ebay?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.