The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Welcome and Discussion > General Discussion

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-16-2017, 06:42 AM   #1
GR8-68
Senior Member
 
GR8-68's Avatar
 
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 3,821
2017 Maggie Valley NC

A few shots from the show yesterday, did not get a whole lot that I felt worthy of posting, it takes a lot of patience to get any decent shots with so many people present. Met yet a few other board members.
Attached Images
    
__________________
Larry

It is easily overlooked that what is now called vintage was once brand new.

"Bed wood floors" For price requests, shipping quote or questions please email at: lgrant@dixoncabinetry.com

"Project 68"

"Project 72 Monte"

paypal.me/ldgrant
GR8-68 is offline   Reply With Quote
Old 07-16-2017, 06:46 AM   #2
GR8-68
Senior Member
 
GR8-68's Avatar
 
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 3,821
Re: 2017 Maggie Valley NC

A c10 and well a sweet Nova SS
Attached Images
  
__________________
Larry

It is easily overlooked that what is now called vintage was once brand new.

"Bed wood floors" For price requests, shipping quote or questions please email at: lgrant@dixoncabinetry.com

"Project 68"

"Project 72 Monte"

paypal.me/ldgrant
GR8-68 is offline   Reply With Quote
Old 07-16-2017, 06:55 AM   #3
GR8-68
Senior Member
 
GR8-68's Avatar
 
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 3,821
Re: 2017 Maggie Valley NC

MattPSU 's sweet c10 .... was great to meet you Matt, thanks for holding off the traffic while I got a few shots of your ride
Attached Images
   
__________________
Larry

It is easily overlooked that what is now called vintage was once brand new.

"Bed wood floors" For price requests, shipping quote or questions please email at: lgrant@dixoncabinetry.com

"Project 68"

"Project 72 Monte"

paypal.me/ldgrant
GR8-68 is offline   Reply With Quote
Old 07-16-2017, 07:12 AM   #4
faribran
Registered User
 
Join Date: Jul 2005
Location: AL
Posts: 1,792
Re: 2017 Maggie Valley NC

Thank you sir for the nice pics...
__________________
"
faribran is offline   Reply With Quote
Old 07-16-2017, 07:15 AM   #5
GR8-68
Senior Member
 
GR8-68's Avatar
 
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 3,821
Re: 2017 Maggie Valley NC

One I caught on my phone on rhe way down. Yes he was there
Attached Images
 
__________________
Larry

It is easily overlooked that what is now called vintage was once brand new.

"Bed wood floors" For price requests, shipping quote or questions please email at: lgrant@dixoncabinetry.com

"Project 68"

"Project 72 Monte"

paypal.me/ldgrant
GR8-68 is offline   Reply With Quote
Old 07-16-2017, 07:39 AM   #6
special-K
Special Order
 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt.Airy,MD
Posts: 61,246
Re: 2017 Maggie Valley NC

Thanks Larry! I wish I could have made it. Nice selection.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

'67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi...project 'Driver Quality'
'72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok...'The 72'
Tim

"Don't call me a redneck. I'm just a rough cut country gentleman"

R.I.P. East Side Low Life __________ R.I.P. El Jay_____________ R.I.P. 72BLUZ _____________
special-K is offline   Reply With Quote
Old 07-16-2017, 01:05 PM   #7
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 15,766
Unhappy Re: 2017 Maggie Valley NC

So you are the one I waited on to take pictures so I could park!
Didn't get a picture took of mine either and we didn't get to meet!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 07-16-2017, 05:26 PM   #8
GR8-68
Senior Member
 
GR8-68's Avatar
 
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 3,821
Re: 2017 Maggie Valley NC

Nope wasn't me, you were already there when I arrived and we did meet. Haha. I know it is to many names and faces to try to remember

I will try to see what pictures I got of yours, didn't get many that I liked to be honest
__________________
Larry

It is easily overlooked that what is now called vintage was once brand new.

"Bed wood floors" For price requests, shipping quote or questions please email at: lgrant@dixoncabinetry.com

"Project 68"

"Project 72 Monte"

paypal.me/ldgrant
GR8-68 is offline   Reply With Quote
Old 07-16-2017, 05:55 PM   #9
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 15,766
Re: 2017 Maggie Valley NC

Quote:
Originally Posted by GR8-68 View Post
Nope wasn't me, you were already there when I arrived and we did meet. Haha. I know it is to many names and faces to try to remember

I will try to see what pictures I got of yours, didn't get many that I liked to be honest
Hit the wrong key sorry
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Last edited by Andy4639; 07-16-2017 at 06:00 PM.
Andy4639 is offline   Reply With Quote
Old 07-16-2017, 05:59 PM   #10
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 15,766
Thumbs up Re: 2017 Maggie Valley NC

Quote:
Originally Posted by GR8-68 View Post
Nope wasn't me, you were already there when I arrived and we did meet. Haha. I know it is to many names and faces to try to remember

I will try to see what pictures I got of yours, didn't get many that I liked to be honest
Oh yea ok Larry we did meet.

There was a guy taking pictures of someones truck and he was right behind me when I was trying to park. I didn't see him because he was squatting down. Matt hollered at me to stop.
Yes I remember meeting you now. Your from Winston-Salem NC.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 07-16-2017, 06:15 PM   #11
GR8-68
Senior Member
 
GR8-68's Avatar
 
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 3,821
Re: 2017 Maggie Valley NC

All good bro, There is alot going on there. I believe I would have moved if I seen someone trying to back over me,
__________________
Larry

It is easily overlooked that what is now called vintage was once brand new.

"Bed wood floors" For price requests, shipping quote or questions please email at: lgrant@dixoncabinetry.com

"Project 68"

"Project 72 Monte"

paypal.me/ldgrant
GR8-68 is offline   Reply With Quote
Old 07-16-2017, 06:16 PM   #12
GR8-68
Senior Member
 
GR8-68's Avatar
 
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 3,821
Re: 2017 Maggie Valley NC

I am also going to try to make it to the fall picnic, Matt invited me to come over.
__________________
Larry

It is easily overlooked that what is now called vintage was once brand new.

"Bed wood floors" For price requests, shipping quote or questions please email at: lgrant@dixoncabinetry.com

"Project 68"

"Project 72 Monte"

paypal.me/ldgrant
GR8-68 is offline   Reply With Quote
Old 07-16-2017, 06:47 PM   #13
hewittca
Registered User
 
hewittca's Avatar
 
Join Date: Jun 2014
Location: Winston Salem, NC
Posts: 881
Re: 2017 Maggie Valley NC

Thanks for sharing. I always love checking out event photos because you see trucks that never make it to the forum or social media otherwise.
__________________
Build: Green Gus
Instagram: @dr.hewitt
Concept Photos: Master Thread
hewittca is offline   Reply With Quote
Old 07-16-2017, 07:08 PM   #14
rusty76
Registered User
 
rusty76's Avatar
 
Join Date: Sep 2012
Location: Midway, NC
Posts: 2,852
Re: 2017 Maggie Valley NC

Thanks for posting up.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873
The low buck build threads. Check'em out!
http://67-72chevytrucks.com/vboard/s...d.php?t=666022
My build thread
Crossmembers CC
rusty76 is offline   Reply With Quote
Old 07-16-2017, 07:45 PM   #15
FRCvette
Registered User
 
Join Date: Mar 2007
Location: cincy
Posts: 213
Re: 2017 Maggie Valley NC

Yes thanks for posting pics. I was there and it is cool to see pics of the trucks.
__________________
_____________________________________________
There's something women like about a pick-up man

1970 c10 swb Stepside
1937 Ford Coupe Street Rod
2013 Silverado swb
FRCvette is offline   Reply With Quote
Old 07-17-2017, 05:52 AM   #16
GR8-68
Senior Member
 
GR8-68's Avatar
 
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 3,821
Re: 2017 Maggie Valley NC

Phone pic
Attached Images
 
__________________
Larry

It is easily overlooked that what is now called vintage was once brand new.

"Bed wood floors" For price requests, shipping quote or questions please email at: lgrant@dixoncabinetry.com

"Project 68"

"Project 72 Monte"

paypal.me/ldgrant
GR8-68 is offline   Reply With Quote
Old 07-17-2017, 07:11 AM   #17
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 15,766
Thumbs up Re: 2017 Maggie Valley NC

Yea man come on down for the picnic.

Anybody is welcome.

FRCvette,
Yes thanks for posting pics. I was there and it is cool to see pics of the trucks. You should have come over and introduced your self man.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 07-17-2017, 08:07 AM   #18
hewittca
Registered User
 
hewittca's Avatar
 
Join Date: Jun 2014
Location: Winston Salem, NC
Posts: 881
Re: 2017 Maggie Valley NC

I dig those stepside twins.
__________________
Build: Green Gus
Instagram: @dr.hewitt
Concept Photos: Master Thread
hewittca is offline   Reply With Quote
Old 07-19-2017, 03:47 PM   #19
GR8-68
Senior Member
 
GR8-68's Avatar
 
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 3,821
Re: 2017 Maggie Valley NC

Quote:
Originally Posted by hewittca View Post
I dig those stepside twins.
First thing I seen when I walked up, they were not even inside in the show
__________________
Larry

It is easily overlooked that what is now called vintage was once brand new.

"Bed wood floors" For price requests, shipping quote or questions please email at: lgrant@dixoncabinetry.com

"Project 68"

"Project 72 Monte"

paypal.me/ldgrant
GR8-68 is offline   Reply With Quote
Old 07-19-2017, 03:57 PM   #20
mongocanfly
Senior Member
 
Join Date: May 2015
Location: alabama
Posts: 3,755
Re: 2017 Maggie Valley NC

Mucho agreeo...double steps are sweet
mongocanfly is online now   Reply With Quote
Old 07-20-2017, 07:40 AM   #21
MattPSU
Registered User
 
MattPSU's Avatar
 
Join Date: Nov 2011
Location: Lyman, SC
Posts: 717
Re: 2017 Maggie Valley NC

Quote:
Originally Posted by GR8-68 View Post
MattPSU 's sweet c10 .... was great to meet you Matt, thanks for holding off the traffic while I got a few shots of your ride
Nice meeting you too! And great pictures! Sorry we didn't talk longer. I felt like I had 200 partial conversations all weekend. So much to see, so many to talk to, and so much to do!

Hopefully we'll see you at the picnic in October.

- Matt
__________________
Matt Criswell - Lyman, SC

1972 Chevy Cheyenne SWB - Build: Porterbuilt State 1 Front & Rear, Bolt in Notch, McGaughys 2.5 Drop Spindles, Boyd Welding Fuel Tank

UPSTATE SC GM TRUCK CLUB: FACEBOOK WEBSITE
MattPSU is offline   Reply With Quote
Old 07-20-2017, 07:41 AM   #22
MattPSU
Registered User
 
MattPSU's Avatar
 
Join Date: Nov 2011
Location: Lyman, SC
Posts: 717
Re: 2017 Maggie Valley NC

And if anyone wants to see my pictures, they're here:

http://67-72chevytrucks.com/vboard/s...d.php?t=742731
__________________
Matt Criswell - Lyman, SC

1972 Chevy Cheyenne SWB - Build: Porterbuilt State 1 Front & Rear, Bolt in Notch, McGaughys 2.5 Drop Spindles, Boyd Welding Fuel Tank

UPSTATE SC GM TRUCK CLUB: FACEBOOK WEBSITE
MattPSU is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com