The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-13-2013, 12:16 AM   #1
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
Transfer Case I.D.

So we pulled my dads 69 k20 truck out of the field its been siting in for more than 12 years and started wrench on it and came across this transfer case under the truck. It doesn't look like any of the usual transfer cases on this gen truck(np205,206). As you may have noticed, I'm new to these trucks. Thanks.
Attached Images
  
Tito19 is offline   Reply With Quote
Old 04-13-2013, 12:39 AM   #2
snj8198
Registered User
 
snj8198's Avatar
 
Join Date: Feb 2007
Location: Star Valley, WY
Posts: 2,024
Re: Transfer Case I.D.

Rockwell 221. Welcometo the board.
__________________
Steve
1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's
snj8198 is offline   Reply With Quote
Old 04-13-2013, 12:45 AM   #3
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
Re: Transfer Case I.D.

Thank you snj8198.
Tito19 is offline   Reply With Quote
Old 04-13-2013, 07:06 AM   #4
jjzepplin
Registered User
 
jjzepplin's Avatar
 
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 3,979
Re: Transfer Case I.D.

Welcome sir! That is a great start to a nice ride. Wonder why he would just leave it in a field? I guess so he could pass it on to you!
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688
72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build
jjzepplin is offline   Reply With Quote
Old 04-13-2013, 07:10 AM   #5
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,816
Re: Transfer Case I.D.

Yeah its a rockwell t221,Is the truck a stick?
andrewmp6 is offline   Reply With Quote
Old 04-13-2013, 10:34 AM   #6
68panelman
Senior Member
 
68panelman's Avatar
 
Join Date: Jan 2011
Location: Delaware and Long Island, New York
Posts: 3,025
Re: Transfer Case I.D.

Special-k "Tim" will like that one.
68panelman is offline   Reply With Quote
Old 04-13-2013, 09:28 PM   #7
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
Re: Transfer Case I.D.

Didn't have room at the house and didn't want to get rid of it, that was the next best thing. Yea it's stick.
Posted via Mobile Device
Tito19 is offline   Reply With Quote
Old 04-14-2013, 10:37 AM   #8
eric67m
Registered User
 
eric67m's Avatar
 
Join Date: Apr 2005
Location: Monroe, WA
Posts: 298
Re: Transfer Case I.D.

What size tires are on your truck? I assume there is no lift. Do you know if they rub?

I need tires in the future.....
Posted via Mobile Device
__________________
67 K10, lwb, fleetside, 327, 4spd, 205, cab and 3/4 frame swap, 14 bolt, big window, and a "rustoleum roll job"
eric67m is offline   Reply With Quote
Old 04-14-2013, 12:01 PM   #9
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
Re: Transfer Case I.D.

Tires: 35x12.5x16.5 they did rub so I notched out about ~2.5 inches on fender. The rear fit fine with no rubing. When I say no rubing this means on the street, haven't had the chance to articulate the suspention but it looks like there is room. O, and you are correct no lift.
Posted via Mobile Device
Tito19 is offline   Reply With Quote
Old 04-16-2013, 12:22 AM   #10
'63GENIII
Senior Member
 
'63GENIII's Avatar
 
Join Date: Sep 2008
Location: San Carlos, Ca.
Posts: 2,717
Re: Transfer Case I.D.

Welcome and nice truck. T221's are decent. Make sure it has enough oil at ALL times. They tend to run a little warmer and be a little louder than the 205's but with proper care should fare pretty well
Posted via Mobile Device
__________________
Chris


'63 k15 long step
Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205
52" front and 63" rear spring swap
D44 / 14bff - disc axles
Milemarker 9K and 10.5K hydraulic winches

63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread


NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build

L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29
'63GENIII is offline   Reply With Quote
Old 04-16-2013, 02:04 AM   #11
Tito19
Registered User
 
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
Re: Transfer Case I.D.

Thanks for the heads up and welcome. Members seem friendly and knowledgeable, I think I'm going to like it here. ��
Posted via Mobile Device
Tito19 is offline   Reply With Quote
Reply

Bookmarks

Tags
k20, transfer case

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com