WA Restored cupholder console - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 12-09-2018, 09:42 PM

Completely disassembled, cleaned and blasted with walnut shells to remove debris and loose paint. Painted with SEM Landau Black.
Real nice chrome trim ring. Latch works as it should firmly holding lid.
I have a GMC emblem too, no charge to exchange the emblem.
$425 shipped.

*randy500* · 12-09-2018, 09:44 PM

Passenger side

*randy500* · 12-09-2018, 09:44 PM

Drivers side

*randy500* · 12-09-2018, 09:45 PM

Front

*randy500* · 12-09-2018, 09:47 PM

Back

*randy500* · 12-09-2018, 09:48 PM

Bottom

*randy500* · 12-09-2018, 09:50 PM

Inside

*randy500* · 12-09-2018, 10:19 PM

GMC emblem

**dtkarst** · 12-09-2018, 10:37 PM

I’m still a little fuzzy on consoles...they came with different holes to hole the seat belts correct? And what did you Have to do to get cup holders in that?

*randy500* · 12-09-2018, 10:42 PM

Quote:

Originally Posted by dtkarst

I’m still a little fuzzy on consoles...they came with different holes to hole the seat belts correct? And what did you Have to do to get cup holders in that?

Seat belt holder consoles are correct for 69-72. They continued till 76 or so, when full one pice seatbelts became standard. Cupholder consoles were produced for the newer seat belts. Cupholders were not an option just a later design change.

I bought the stock cupholder on this forum and installed it in a seat belt holder console. You have to cut the seatbelt holders out to fit it. This is the first time I have done it and it turned out nice.

**71K5Randy** · 12-10-2018, 12:17 AM

GM also made a seatbelt holder accessory that you can attach to the front of a cup holder console, which is what I plan to use. Best of both worlds I’m thinking.
You have a nice console here, Randy!

Twisted78SS · 01-21-2019, 01:35 AM

sending you a PM

*randy500* · 02-02-2019, 03:44 PM

Still for sale

Tonyg903 · 02-21-2019, 09:26 PM

Quote:

Originally Posted by randy500

Completely disassembled, cleaned and blasted with walnut shells to remove debris and loose paint. Painted with SEM Landau Black.
Real nice chrome trim ring. Latch works as it should firmly holding lid.
I have a GMC emblem too, no charge to exchange the emblem.
$390 shipped.

Posted via Mobile Device

**EdwardSams** · 02-21-2019, 09:59 PM

Newbie here - how does this thing mount? On bench or is it meant for buckets? Or does it sit on floor? Tried finding pix with it in place and came up empty.

coops714x4 · 02-21-2019, 10:23 PM

Edward they are for bucket seats, bolt to floor between seats.

Onry69CST · 02-21-2019, 10:51 PM

Randy, would you have an extra blue chevy console emblem to sell?

**EdwardSams** · 02-21-2019, 11:00 PM

Quote:

Originally Posted by coops714x4

Edward they are for bucket seats, bolt to floor between seats.

Thx for the info - appreciate it.

*randy500* · 02-21-2019, 11:47 PM

Quote:

Originally Posted by Onry69CST

Randy, would you have an extra blue chevy console emblem to sell?

No extra emblems right now.

*randy500* · 02-24-2019, 12:16 PM

Quote:

Originally Posted by robs71

Randy do you have any black 69-72 consoles ??

No, I don’t have any consoles right now...I’m looking for a nice upper console if someone has one.

Terrysch · 03-06-2019, 05:37 PM

Randy,
If you sell this center console with the Chevrolet emblem, is the GMC emblem shown available for purchase. Thanks, Terry

*randy500* · 03-06-2019, 05:42 PM

Quote:

Originally Posted by Terrysch

Randy,
If you sell this center console with the Chevrolet emblem, is the GMC emblem shown available for purchase. Thanks, Terry

I think I have an extra GMC emblem, I will post it up and put you first inline.

Terrysch · 03-06-2019, 05:49 PM

Thanks Randy. I have an extra Chevrolet emblem. Need a GMC emblem. Are you interested in a trade. I would think the Chevrolet one is in greater demand.

Terrysch · 03-06-2019, 06:19 PM

Quote:

Originally Posted by randy500

Completely disassembled, cleaned and blasted with walnut shells to remove debris and loose paint. Painted with SEM Landau Black.
Real nice chrome trim ring. Latch works as it should firmly holding lid.
I have a GMC emblem too, no charge to exchange the emblem.
$390 shipped.

Randy,
Is this cupholder still for sale? I have to refinish mine? it is in excellent shape functionally, but needs to be refinished.

Twisted78SS · 03-07-2019, 11:24 AM

Randy, if you don't come up with one, I have one I can dig out of storage for Terrysch.

12-09-2018, 09:42 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Restored cupholder console Completely disassembled, cleaned and blasted with walnut shells to remove debris and loose paint. Painted with SEM Landau Black. Real nice chrome trim ring. Latch works as it should firmly holding lid. I have a GMC emblem too, no charge to exchange the emblem. $425 shipped. Attached Images Last edited by randy500; 04-15-2019 at 02:48 PM.

12-09-2018, 09:44 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Restored cupholder console Passenger side Attached Images

12-09-2018, 09:44 PM	#3
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Restored cupholder console Drivers side Attached Images

12-09-2018, 09:45 PM	#4
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Restored cupholder console Front Attached Images

12-09-2018, 09:47 PM	#5
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Restored cupholder console Back Attached Images

12-09-2018, 09:48 PM	#6
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Restored cupholder console Bottom Attached Images

12-09-2018, 09:50 PM	#7
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Restored cupholder console Inside Attached Images

12-09-2018, 10:19 PM	#8
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Restored cupholder console GMC emblem Attached Images

12-09-2018, 10:37 PM	#9
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: Restored cupholder console I’m still a little fuzzy on consoles...they came with different holes to hole the seat belts correct? And what did you Have to do to get cup holders in that?

12-10-2018, 12:17 AM	#11
71K5Randy Senior Member Join Date: Aug 2015 Location: Belleville, IL (St. Louis metro) Posts: 724	Re: Restored cupholder console GM also made a seatbelt holder accessory that you can attach to the front of a cup holder console, which is what I plan to use. Best of both worlds I’m thinking. You have a nice console here, Randy! __________________ 71 K5 CST Blazer 350 70 Suburban 350 71 Chevelle SS 454 69 Olds 442 454 (yes, Chevy power!) 68 Camaro RS 327 66 Chevelle SS 396 Members I have met: 62cdan, 60case, daddymoo2, aotte1, 70shortfleet, countr, Cowboy#40, chevy71super, davischevy

01-21-2019, 01:35 AM	#12
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Restored cupholder console sending you a PM __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

02-02-2019, 03:44 PM	#13
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Restored cupholder console Still for sale

02-21-2019, 09:59 PM	#15
EdwardSams Senior Member Join Date: Aug 2018 Location: Long Island, NY Posts: 233	Re: Restored cupholder console Newbie here - how does this thing mount? On bench or is it meant for buckets? Or does it sit on floor? Tried finding pix with it in place and came up empty.

02-21-2019, 10:23 PM	#16
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: Restored cupholder console Edward they are for bucket seats, bolt to floor between seats. Attached Images __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

02-21-2019, 10:51 PM	#17
Onry69CST Registered User Join Date: Jan 2019 Location: Mantua Ohio Posts: 189	Re: Restored cupholder console Randy, would you have an extra blue chevy console emblem to sell?



Register or Log In To remove these advertisements.

03-06-2019, 05:37 PM	#21
Terrysch Registered User Join Date: Feb 2019 Location: Ozark, MO Posts: 577	Re: Restored cupholder console Randy, If you sell this center console with the Chevrolet emblem, is the GMC emblem shown available for purchase. Thanks, Terry

03-06-2019, 05:49 PM	#23
Terrysch Registered User Join Date: Feb 2019 Location: Ozark, MO Posts: 577	Re: Restored cupholder console Thanks Randy. I have an extra Chevrolet emblem. Need a GMC emblem. Are you interested in a trade. I would think the Chevrolet one is in greater demand.

03-07-2019, 11:24 AM	#25
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Restored cupholder console Randy, if you don't come up with one, I have one I can dig out of storage for Terrysch. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

Register or Log In To remove these advertisements.