The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-07-2013, 05:50 PM   #1
SlammedBlazerLife
Registered User
 
Join Date: Mar 2013
Location: Durango,co
Posts: 28
Transfer case issue, Two Leaks.

On my 72' Blazer I have two oil leaks on the transfer case. These two leaks leave a noticeable oil spot when parked over a period of time. To try and solve my problem i tightened the bolts that i thought might have been an issue , but i still get some leaks. I would like to get some advice on this issue i would gladly appreciate any info, I have provided two pictures where the leaks that i assume are coming from.
Attached Images
  
SlammedBlazerLife is offline   Reply With Quote
Old 03-07-2013, 05:51 PM   #2
SlammedBlazerLife
Registered User
 
Join Date: Mar 2013
Location: Durango,co
Posts: 28
Re: Transfer case issue, Two Leaks.

On the top picture, on the bottom bolt is where i seem to find little oil drips.
SlammedBlazerLife is offline   Reply With Quote
Old 03-07-2013, 06:23 PM   #3
truckster
Senior Member
 
truckster's Avatar
 
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,761
Re: Transfer case issue, Two Leaks.

The cover on the left has a needle bearing in it. Be very careful when you take it off, which is what you're going to have to do if you want to fix the leak. Use some grease to hold the bearings in place when you reinstall it.

It's hard to tell where the oil is coming from on the speedo adapter in your pic, but the most common cause of leaks there is just an O-ring.
truckster is offline   Reply With Quote
Old 03-08-2013, 11:06 AM   #4
-Greg72
Registered User
 
-Greg72's Avatar
 
Join Date: Nov 2001
Location: Austin, TX
Posts: 308
Re: Transfer case issue, Two Leaks.

Allow me to make your day.....

http://coloradok5.com/forums/showthread.php?t=269149


A very OLD tech article written by yours truly. This will solve the speedo leak....cost should be around $22.


Happy Friday.


-G
__________________

1972 K5 - 502BBC/4L80E/Magnum205/Mog-9s/5.26s/38" BFG KM2s


Find me on INSTAGRAM @MIGHTASWELLK5

'72 K5 - Greg's "Might As Well™" Build
-Greg72 is offline   Reply With Quote
Old 03-09-2013, 11:02 PM   #5
SlammedBlazerLife
Registered User
 
Join Date: Mar 2013
Location: Durango,co
Posts: 28
Re: Transfer case issue, Two Leaks.

Thanks Greg, I found a sleeve on amazon for $15.99, your info definitively made my day.

Also i was wondering on the top pic where i also have small oil drips. Can i fix that issue by replacing a certain gasket or part ? Any thoughts or opinions??? Thanks
SlammedBlazerLife is offline   Reply With Quote
Old 03-09-2013, 11:08 PM   #6
SlammedBlazerLife
Registered User
 
Join Date: Mar 2013
Location: Durango,co
Posts: 28
Re: Transfer case issue, Two Leaks.

Thanks Greg, I found a sleeve on amazon for $15.99, your info definitively made my day.

Also i was wondering on the top pic where i also have small oil drips. Can i fix that issue by replacing a certain gasket or part ? Any thoughts or opinions??? Thanks
SlammedBlazerLife is offline   Reply With Quote
Old 03-27-2013, 11:03 PM   #7
SlammedBlazerLife
Registered User
 
Join Date: Mar 2013
Location: Durango,co
Posts: 28
Re: Transfer case issue, Two Leaks.

Any body know where to get a speedo?
SlammedBlazerLife is offline   Reply With Quote
Old 03-27-2013, 11:59 PM   #8
RED 1970
Account Suspended
 
Join Date: May 2009
Location: Portland, OR
Posts: 89
Re: Transfer case issue, Two Leaks.

Looks like you're leaking ATF...

I've had two cases that were filled with ATF by the PO's. They should have gear oil.
RED 1970 is offline   Reply With Quote
Old 03-28-2013, 12:35 AM   #9
DSST_construction
Registered User
 
Join Date: Mar 2013
Location: Houston Texas
Posts: 66
Re: Transfer case issue, Two Leaks.

so if you have atf already in the tc, would i just drain the aft and add gear oil or would would i have to get all the atf out first,

whats the best grear oil to use? synthetic?
DSST_construction is offline   Reply With Quote
Old 03-28-2013, 12:38 AM   #10
RED 1970
Account Suspended
 
Join Date: May 2009
Location: Portland, OR
Posts: 89
Re: Transfer case issue, Two Leaks.

Drain and fill. Don't waste your money on synthetic.
Posted via Mobile Device
RED 1970 is offline   Reply With Quote
Old 03-28-2013, 09:15 AM   #11
Ebstard944
Registered User
 
Ebstard944's Avatar
 
Join Date: Sep 2012
Location: West Seattle
Posts: 156
Re: Transfer case issue, Two Leaks.

I am going thru ATF in the transfer case right now, but it is the seals between the th350 and the 205 are shot, so it is leaking down from the trans. Keep an eye on the trans fluid.
Ebstard944 is offline   Reply With Quote
Old 03-28-2013, 09:39 AM   #12
-Greg72
Registered User
 
-Greg72's Avatar
 
Join Date: Nov 2001
Location: Austin, TX
Posts: 308
Re: Transfer case issue, Two Leaks.

Quote:
Originally Posted by SlammedBlazerLife View Post
Any body know where to get a speedo?
You could just bypass all of this mechanical speedo and recalibration junk by going with one of the new GPS-enabled speedometers. Autometer sells them, and I'm sure other companies do as well. The speedometer displays your speed based on actual movement across the ground, so larger tires and/or hi-range vs. low-range issues don't matter at all.

I'm thinking of going this route on my own build just for the simplicity (and accuracy) of it, but in your case it can also allow you to seal up those leaking parts once and for all.


-G
__________________

1972 K5 - 502BBC/4L80E/Magnum205/Mog-9s/5.26s/38" BFG KM2s


Find me on INSTAGRAM @MIGHTASWELLK5

'72 K5 - Greg's "Might As Well™" Build
-Greg72 is offline   Reply With Quote
Old 03-28-2013, 10:06 AM   #13
DSST_construction
Registered User
 
Join Date: Mar 2013
Location: Houston Texas
Posts: 66
Re: Transfer case issue, Two Leaks.

Quote:
Originally Posted by Ebstard944 View Post
I am going thru ATF in the transfer case right now, but it is the seals between the th350 and the 205 are shot, so it is leaking down from the trans. Keep an eye on the trans fluid.
is there any way of posting pictues if the seals, where do you buy the new seals from
DSST_construction is offline   Reply With Quote
Old 03-28-2013, 04:49 PM   #14
RED 1970
Account Suspended
 
Join Date: May 2009
Location: Portland, OR
Posts: 89
Re: Transfer case issue, Two Leaks.

Quote:
Originally Posted by -Greg72 View Post
You could just bypass all of this mechanical speedo and recalibration junk by going with one of the new GPS-enabled speedometers.
Autometer also sells electronic speedometers and electronic sending units. You plug the sending unit into your trans, run the wires then calibrate by driving exactly two miles.
RED 1970 is offline   Reply With Quote
Old 03-28-2013, 05:16 PM   #15
cleszkie
Registered User
 
cleszkie's Avatar
 
Join Date: Feb 2003
Location: Santa Ana, CA
Posts: 2,191
Re: Transfer case issue, Two Leaks.

I cannot remember, but I think the bolt holes on the round cover plate on the back of the NP 205 are not blind (they go all the way through the case). Therefore, in addition to the gasket, you need to apply thread sealant to the bolts to prevent fluid from passing by the threads and leaking from beneath the bolt heads. Same issue as some of the engine head bolts that are tapped right into water passages.
cleszkie is offline   Reply With Quote
Old 03-28-2013, 05:21 PM   #16
RED 1970
Account Suspended
 
Join Date: May 2009
Location: Portland, OR
Posts: 89
Re: Transfer case issue, Two Leaks.

Just Googled "NP205 Seal Kit"

Offroad Designs webpage came up in the search... http://www.offroaddesign.com/catalog...rcaseparts.htm

You can get all the seals you could ever want.

Lots of information on the NP205 transfer case there too....
RED 1970 is offline   Reply With Quote
Old 04-13-2013, 02:49 PM   #17
SlammedBlazerLife
Registered User
 
Join Date: Mar 2013
Location: Durango,co
Posts: 28
Re: Transfer case issue, Two Leaks.

So how complicated is it to change the seals on a transfer case? I have manuals and mechanic books for this subject, but should i just take it to a Certified transfer case shop, Any opinions?
SlammedBlazerLife is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com