How much does a 67 panel weigh - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**NGN** · 11-08-2010, 10:28 PM

Well as far as I know it's pretty much a plan jane. 2WD, 6cyl, not sure if it's a tree or four speed, wood floor, barn doors, buckets and I know this won't help but not sure for now if it's a 10 20 30. I'm thinking of trailering it home. Thanks Nick

GIZZ · 11-30-2016, 02:58 AM

TTT from the dead, I searched this too and this post is the best I could come up with. A few guys have put there pickups on scales, but no actual scale weights for a panel truck or even suburban.

**GR8-68** · 11-30-2016, 05:17 AM

Quote:

Originally Posted by GIZZ

TTT from the dead, I searched this too and this post is the best I could come up with. A few guys have put there pickups on scales, but no actual scale weights for a panel truck or even suburban.

http://www.oldride.com/library/1967_chevrolet_c10.html

highwinger · 11-30-2016, 12:17 PM

According to the link above, my burb is 3,815 lbs. When I went to the dump and scaled it with me, a near full tank and about 100 lbs of dumping material it weighed over 5000 lbs.

GIZZ · 11-30-2016, 06:10 PM

I'd love to get it under 4000#. I've seen that link before too, not sure how they came up with those weights. They do look low, anybody else?

**LockDoc** · 11-30-2016, 09:19 PM

-
I guess I could drive mine through the local elevator scales tomorrow. It has an LS1/4l60e all aluminum combo but it should be close....

LockDoc

**LockDoc** · 12-08-2016, 02:31 AM

-
I drove mine over the scales at the elevator. (again) I did it a few days ago but by the time I got home I forgot what it was. Since then my furnace decided to quit on me so I have been working on that, and I fell and cracked a rib last Monday during our first snow storm.. I don't forget how to drive in snow but I forget how to walk. Story of my life....

Anyways, the Panel weighed 4,320#. I was in it (165#) and I do have probably a 100 pounds of tools in the back.....

LockDoc

highwinger · 12-08-2016, 08:40 AM

My wheels must be "big boned"

**LockDoc** · 12-08-2016, 11:35 AM

Quote:

Originally Posted by highwinger

My wheels must be "big boned"

Do you have any interior in it? All I have is some insulation. I don't know how much less the aluminum block LS1 is than the cast block engines but it has to make a little difference....

LockDoc

highwinger · 12-08-2016, 06:07 PM

Quote:

Originally Posted by LockDoc

Do you have any interior in it? All I have is some insulation. I don't know how much less the aluminum block LS1 is than the cast block engines but it has to make a little difference....

LockDoc

Two bench seats.

11-08-2010, 10:28 PM	#1
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 814	How much does a 67 panel weigh Well as far as I know it's pretty much a plan jane. 2WD, 6cyl, not sure if it's a tree or four speed, wood floor, barn doors, buckets and I know this won't help but not sure for now if it's a 10 20 30. I'm thinking of trailering it home. Thanks Nick

11-30-2016, 02:58 AM	#2
GIZZ Registered User Join Date: Jun 2005 Location: Vancouver Posts: 111	Re: How much does a 67 panel weigh TTT from the dead, I searched this too and this post is the best I could come up with. A few guys have put there pickups on scales, but no actual scale weights for a panel truck or even suburban. __________________ GIZZmotorsports on YouTube & my panel truck build '69 c10 panel, '75 c35 flatdeck car hauler

11-30-2016, 12:17 PM	#4
highwinger Registered User Join Date: May 2014 Location: Melbourne, FL Posts: 297	Re: How much does a 67 panel weigh According to the link above, my burb is 3,815 lbs. When I went to the dump and scaled it with me, a near full tank and about 100 lbs of dumping material it weighed over 5000 lbs.

11-30-2016, 06:10 PM	#5
GIZZ Registered User Join Date: Jun 2005 Location: Vancouver Posts: 111	Re: How much does a 67 panel weigh I'd love to get it under 4000#. I've seen that link before too, not sure how they came up with those weights. They do look low, anybody else? __________________ GIZZmotorsports on YouTube & my panel truck build '69 c10 panel, '75 c35 flatdeck car hauler

11-30-2016, 09:19 PM	#6
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,317	Re: How much does a 67 panel weigh - I guess I could drive mine through the local elevator scales tomorrow. It has an LS1/4l60e all aluminum combo but it should be close.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

12-08-2016, 02:31 AM	#7
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,317	Re: How much does a 67 panel weigh - I drove mine over the scales at the elevator. (again) I did it a few days ago but by the time I got home I forgot what it was. Since then my furnace decided to quit on me so I have been working on that, and I fell and cracked a rib last Monday during our first snow storm.. I don't forget how to drive in snow but I forget how to walk. Story of my life.... Anyways, the Panel weighed 4,320#. I was in it (165#) and I do have probably a 100 pounds of tools in the back..... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 12-08-2016 at 02:37 AM.

12-08-2016, 08:40 AM	#8
highwinger Registered User Join Date: May 2014 Location: Melbourne, FL Posts: 297	Re: How much does a 67 panel weigh My wheels must be "big boned"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.