1969/70 K20 - considering trade - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TwoFiftyShifter · 05-11-2016, 07:33 AM

I have recently thought about trading trucks with my Dad. Both are project trucks that start stop and steer. I've got an 84 K10 and he has a 69 or 70 K20. It was previously a wrecker. I love the truck and it has less rust than my truck, but it just hasn't been down the road in 20 years so it will take some work. It has a V8 which might be a 350 and it has a 4 speed Muncie. I've driven it in the yard a bit, jeez it may have 4.57 gears. Base model as far as options go.

Which axles and transfer case would this truck have had if it was stock? What is the easiest way to get it to a 3.xx axle ratio for better drivability? I really like the 84 but it needs quite a bif of rust repair on the cab and the 70 is just cooler in a way. More potential?Don't have any good pics but here is one that shows the bed that had a wrecker unit.

TwoFiftyShifter · 05-11-2016, 01:41 PM

Oops, I didn't realize I was in the Suburban section

Bigdav160 · 05-11-2016, 02:26 PM

The drivetrains would be the same. The easiest way to get 3 something gears is with an axle swap from a later truck. Dana 60 or 14 bolt Corporate. The transfer case is likely a Rockwell

**LockDoc** · 05-11-2016, 08:47 PM

Quote:

Originally Posted by TwoFiftyShifter

Oops, I didn't realize I was in the Suburban section

I will move it for you....

LockDoc

05-11-2016, 07:33 AM	#1
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	1969/70 K20 - considering trade I have recently thought about trading trucks with my Dad. Both are project trucks that start stop and steer. I've got an 84 K10 and he has a 69 or 70 K20. It was previously a wrecker. I love the truck and it has less rust than my truck, but it just hasn't been down the road in 20 years so it will take some work. It has a V8 which might be a 350 and it has a 4 speed Muncie. I've driven it in the yard a bit, jeez it may have 4.57 gears. Base model as far as options go. Which axles and transfer case would this truck have had if it was stock? What is the easiest way to get it to a 3.xx axle ratio for better drivability? I really like the 84 but it needs quite a bif of rust repair on the cab and the 70 is just cooler in a way. More potential?Don't have any good pics but here is one that shows the bed that had a wrecker unit. __________________ 1982 K10 SWB 1987 V20 - Sold - Doh! Last edited by TwoFiftyShifter; 05-11-2016 at 07:52 AM.

05-11-2016, 01:41 PM	#2
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: 1969/70 K20 - considering trade Oops, I didn't realize I was in the Suburban section __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

05-11-2016, 02:26 PM	#3
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: 1969/70 K20 - considering trade The drivetrains would be the same. The easiest way to get 3 something gears is with an axle swap from a later truck. Dana 60 or 14 bolt Corporate. The transfer case is likely a Rockwell __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.