Removing 6 cylinder bellhousing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jeffh · 12-10-2017, 07:19 PM

Any good ideas, tips or advice on removing the manual transmission bellhousing from a 6 cylinder that is stuck? Or is it even possible? I'm starting to think not...

**jayoldschool** · 12-10-2017, 09:04 PM

Is this is a 235 or a 230/250/292? Big difference.

Jeffh · 12-10-2017, 09:37 PM

It's a 235

**Captainfab** · 12-10-2017, 11:59 PM

Make sure you have all the bolts out and then wiggle and pry.

**Wrenchbender Ret** · 12-11-2017, 04:59 AM

You can't get all the bolts out because some are in back of the flywheel. You can't get the flywheel out because you can't get to all the clutch bolts without turning the engine. If you are going to junk the engine I've seen where guys have pulled the oil pan & cut the crank in front of the rear main brg.

**jayoldschool** · 12-11-2017, 02:09 PM

I went through this on my buddy's 235. I removed the trans, removed the flywheel, and didn't bother taking the bellhousing off.

There are two bellhousing bolts that are under the flywheel, that's why you can't remove it, you still have two bolts in.

12-10-2017, 07:19 PM	#1
Jeffh Registered User Join Date: Sep 2017 Location: Red Oak Iowa Posts: 225	Removing 6 cylinder bellhousing Any good ideas, tips or advice on removing the manual transmission bellhousing from a 6 cylinder that is stuck? Or is it even possible? I'm starting to think not...

12-10-2017, 09:04 PM	#2
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,150	Re: Removing 6 cylinder bellhousing Is this is a 235 or a 230/250/292? Big difference.

12-10-2017, 09:37 PM	#3
Jeffh Registered User Join Date: Sep 2017 Location: Red Oak Iowa Posts: 225	Re: Removing 6 cylinder bellhousing It's a 235

12-10-2017, 11:59 PM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Removing 6 cylinder bellhousing Make sure you have all the bolts out and then wiggle and pry. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-11-2017, 04:59 AM	#5
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,190	Re: Removing 6 cylinder bellhousing You can't get all the bolts out because some are in back of the flywheel. You can't get the flywheel out because you can't get to all the clutch bolts without turning the engine. If you are going to junk the engine I've seen where guys have pulled the oil pan & cut the crank in front of the rear main brg.

12-11-2017, 02:09 PM	#6
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,150	Re: Removing 6 cylinder bellhousing I went through this on my buddy's 235. I removed the trans, removed the flywheel, and didn't bother taking the bellhousing off. There are two bellhousing bolts that are under the flywheel, that's why you can't remove it, you still have two bolts in.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.