WA Parting '72 1/2ton 2wd Suburban - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Twisted78SS · 12-20-2016, 02:59 PM

Possible second on the roof rack if it's correct model.. Here's a pic from Hart Rod's burb

Heliarcn · 12-20-2016, 03:27 PM

Not sure where I am in line, but I'm interested in all available headliner bows. Can you give me a price shipped to 89149? thanks.

Bret

*randy500* · 12-20-2016, 04:49 PM

Quote:

Originally Posted by frankinstein

I will take one or two if they are available after Wannabe68. but I am not sure how to take them off yet. Let me know the total and your pay pal info. Thanks.

I got the bows out and need to know which ones you need. I think row 1 and 2 are the same and the last row is about a 1/2 inch shorter. Shipping on one to Texas is $26 (quote to wannabe68), I think the second bow would be marginally more.

*randy500* · 12-20-2016, 04:53 PM

Quote:

Originally Posted by Heliarcn

Not sure where I am in line, but I'm interested in all available headliner bows. Can you give me a price shipped to 89149? thanks.

Bret

Inline for the bows is

Wannabe68, 1 bow
Frankenstein, 2 bows
Then Heliarcn....

Unless someone notes something different for the wait line on these...I did a shipping quote and boxed one up for Wannabe68 to Texas and that came to $26 for reference.

**too much stuff** · 12-20-2016, 07:34 PM

Quote:

Originally Posted by randy500

Found the driver side behind the wheel well in the back of the burb...same price on this one...has some corrosion so you would have to strip the anodizing and buff it out. There is a thread here on the forum on the process.

I think I will hold out for some better trim. Thanks.

WannaBe68 · 12-21-2016, 12:48 AM

PM sent - I do want the bow for the 3rd row.

Thanks again!

**frankinstein** · 12-21-2016, 08:15 AM

I would like the 1st and 2nd row.

WannaBe68 · 12-21-2016, 09:27 AM

Payment sent for the "3rd" row bow, Randy...

Does anyone on here know if the 3rd row headliner bow is slightly shorter than the other 2?

pwdcougar · 12-21-2016, 08:32 PM

If and when you start cutting up for body panels, I need this inner rocker piece that is in front of the drivers rear wheel.

Paul

*randy500* · 12-21-2016, 09:08 PM

Quote:

Originally Posted by pwdcougar

If and when you start cutting up for body panels, I need this inner rocker piece that is in front of the drivers rear wheel.

Paul

I am ready to start cutting, I will look at that part tomorrow and post back.

WannaBe68 · 12-22-2016, 01:02 AM

Hey Randy,

Your PM inbox is full, but I did get your message about the headliner bows being similar. Pick out the best one and send it on it's way!

Thanks again, Bro'!

*randy500* · 12-22-2016, 01:05 AM

Quote:

Originally Posted by WannaBe68

Hey Randy,

Your PM inbox is full, but I did get your message about the headliner bows being similar. Pick out the best one and send it on it's way!

Thanks again, Bro'!

Forum sent me a message my PM box was full and took care of it. Will send you the bow tomorrow!

**frankinstein** · 12-22-2016, 10:03 AM

Payment has been sent. Thank you.

**frankinstein** · 12-22-2016, 10:25 AM

Would you happen to have any of the hardware that holds the spare tire in place.

pwdcougar · 12-22-2016, 07:03 PM

Quote:

Originally Posted by randy500

I am ready to start cutting, I will look at that part tomorrow and post back.

Thanks Randy. Let me know how it looks!

Paul

6772king · 12-24-2016, 07:56 AM

Yes they are welded to the quarter panels...They are spot welded at the inside of the wheel arch..I would like to be able to drill all the spot welds and reweld them in...I'll try to get some pics this weekend

iriereggaeman · 12-24-2016, 09:32 AM

do you have the rear air conditioning switch?

**DeadheadNM** · 12-24-2016, 11:13 AM

Any luck on the defrost vents? Thanks. Pete

*randy500* · 12-24-2016, 01:58 PM

Quote:

Originally Posted by 6772king

Yes they are welded to the quarter panels...They are spot welded at the inside of the wheel arch..I would like to be able to drill all the spot welds and reweld them in...I'll try to get some pics this weekend

I'm out of town until Tuesday but will look at the wheelhouses when I return

*randy500* · 12-24-2016, 01:59 PM

Quote:

Originally Posted by iriereggaeman

do you have the rear air conditioning switch?

The switch is there but the knob is missing, $25 plus $7 shipping

*randy500* · 12-24-2016, 02:01 PM

Quote:

Originally Posted by DeadheadNM

Any luck on the defrost vents? Thanks. Pete

I did find a set of green vents, I need to see what I have in total so I have a set for each truck, will check this week

pwdcougar · 12-24-2016, 05:53 PM

Quote:

Originally Posted by pwdcougar

Thanks Randy. Let me know how it looks!

Paul

Randy
Any luck checking this out yet?

Paul

BaggedBurban · 12-24-2016, 09:26 PM

Quote:

Originally Posted by randy500

It does have the very rear shoulder belt plugs and the plugs for the rear door hinge holes. Dollar a plug plus small flat rate box?

I will take every plug you have. Please let me know the total shipped to 97080 and I will get you paid up.

Thanks!!!

*randy500* · 12-24-2016, 10:48 PM

Quote:

Originally Posted by pwdcougar

Randy
Any luck checking this out yet?

Paul

I'm out of town but that piece is in my mind and I will cut the outer panel off and see how it looks and post up

Klumpo · 12-25-2016, 07:02 PM

Hello looking for the metal plate with two screw holes that divides and retains driver side rear cargo area panels. Thanks. randie110@aol.com

12-20-2016, 02:59 PM	#51
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Parting '72 1/2ton 2wd Suburban Possible second on the roof rack if it's correct model.. Here's a pic from Hart Rod's burb __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired Last edited by Twisted78SS; 12-20-2016 at 03:20 PM.

12-20-2016, 03:27 PM	#52
Heliarcn Registered User Join Date: Nov 2013 Location: Las Vegas, Nevada Posts: 376	Re: Parting '72 1/2ton 2wd Suburban Not sure where I am in line, but I'm interested in all available headliner bows. Can you give me a price shipped to 89149? thanks. Bret __________________ Bret 1972 Chevy Suburban 1976 Blazer

12-21-2016, 12:48 AM	#56
WannaBe68 Registered User Join Date: Jun 2016 Location: Texas! Posts: 430	Re: Parting '72 1/2ton 2wd Suburban PM sent - I do want the bow for the 3rd row. Thanks again!

12-21-2016, 08:15 AM	#57
frankinstein Senior Member Join Date: Jul 2016 Location: Anthem AZ Posts: 206	Re: Parting '72 1/2ton 2wd Suburban I would like the 1st and 2nd row.

12-21-2016, 09:27 AM	#58
WannaBe68 Registered User Join Date: Jun 2016 Location: Texas! Posts: 430	Re: Parting '72 1/2ton 2wd Suburban Payment sent for the "3rd" row bow, Randy... Does anyone on here know if the 3rd row headliner bow is slightly shorter than the other 2?

12-21-2016, 08:32 PM	#59
pwdcougar Registered User Join Date: Oct 2013 Location: New Jersey Posts: 1,302	Re: Parting '72 1/2ton 2wd Suburban If and when you start cutting up for body panels, I need this inner rocker piece that is in front of the drivers rear wheel. Paul Attached Images __________________ "You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those" 1969 Mercury Cougar Standard 4 speed 1969 Mercury Cougar XR7 convertible 1970 4WD Chevrolet Suburban 1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)

12-22-2016, 01:02 AM	#61
WannaBe68 Registered User Join Date: Jun 2016 Location: Texas! Posts: 430	Re: Parting '72 1/2ton 2wd Suburban Hey Randy, Your PM inbox is full, but I did get your message about the headliner bows being similar. Pick out the best one and send it on it's way! Thanks again, Bro'!

12-22-2016, 10:03 AM	#63
frankinstein Senior Member Join Date: Jul 2016 Location: Anthem AZ Posts: 206	Re: Parting '72 1/2ton 2wd Suburban Payment has been sent. Thank you.

12-22-2016, 10:25 AM	#64
frankinstein Senior Member Join Date: Jul 2016 Location: Anthem AZ Posts: 206	Re: Parting '72 1/2ton 2wd Suburban Would you happen to have any of the hardware that holds the spare tire in place.

12-24-2016, 07:56 AM	#66
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: Parting '72 1/2ton 2wd Suburban Yes they are welded to the quarter panels...They are spot welded at the inside of the wheel arch..I would like to be able to drill all the spot welds and reweld them in...I'll try to get some pics this weekend __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

12-24-2016, 09:32 AM	#67
iriereggaeman Registered User Join Date: Oct 2016 Location: Lake Mary, FL Posts: 139	Re: Parting '72 1/2ton 2wd Suburban do you have the rear air conditioning switch?

12-24-2016, 11:13 AM	#68
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,278	Re: Parting '72 1/2ton 2wd Suburban Any luck on the defrost vents? Thanks. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

12-25-2016, 07:02 PM	#75
Klumpo Registered User Join Date: Jun 2016 Location: Pismo beach california Posts: 6	Re: Parting '72 1/2ton 2wd Suburban Hello looking for the metal plate with two screw holes that divides and retains driver side rear cargo area panels. Thanks. randie110@aol.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.