The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1960-1966 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-23-2018, 07:46 PM   #26
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

Quote:
Originally Posted by ScottH View Post
Appreciate ur help on this. The easiest way would be from the open seam to where it ends under the seat. On the sides if u could cut it where it meets the flat floor area on both sides that should work. LMK if that isnt clear & what u need for the patch.

Thanks
Scott
Is this to far back or you need it further back? I'm guessing shipping weight to be about 15lbs (I could be off it's been a while) that puts shipping at $35 for a total of $50. If that's in the ball park of what you had in mind I'll cut it out, box it and get a definite price on shipping to you.
Attached Images
 
Mack B is offline   Reply With Quote
Old 01-23-2018, 07:49 PM   #27
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

Quote:
Originally Posted by aotte1 View Post
Interest in big back window section, condition and pics of it.
What price do you want?

Les
I'm using that on my project, that's the reason I bought this truck. Sorry about that.
Mack B is offline   Reply With Quote
Old 01-23-2018, 07:53 PM   #28
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

Quote:
Originally Posted by MikeG. View Post
I want the Whole dash from door to door
I figured 40lb shipping weight (someone set me straight if I'm way off) and it came up to $100.00 for shipping for a total of $115. Let me know if you are interested, I'll cut it out and get a definite shipping price
Mack B is offline   Reply With Quote
Old 01-23-2018, 07:56 PM   #29
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

Quote:
Originally Posted by jasons View Post
I think I can work with that. I'd take from the instrument panel opening to the glove box opening and a few inches on the top. Kind of like this, a couple more inches to each side would be good.
Mikeg did ask about the whole dash first, I thought the condition would have turned him away so I am sorry to jumble everything up. If he doesn't say he wants it by Friday, I'll cut the center out for you.
Mack B is offline   Reply With Quote
Old 01-23-2018, 07:58 PM   #30
ScottH
Senior Member
 
ScottH's Avatar
 
Join Date: Sep 2002
Location: Hampstead, NC
Posts: 8,179
Re: Cutting up 65 cab

Thanks 4 the pic mack, let me check mine again 2 b sure on the length.
Will get back 2 u.

Scott
__________________
1963 C10 swb fleetside
1966 GMC G1000 Handi-bus (future project)
1955 Chevy 2 dr. wagon
2008 Corvette convertible
ScottH is offline   Reply With Quote
Old 01-23-2018, 08:03 PM   #31
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

Quote:
Originally Posted by fredhlynch2 View Post
Need bracket and pedals for the brake and clutch. Zip code is 54935
Let me make sure everything is there, and I'll get you a shipping quote this weekend.
Mack B is offline   Reply With Quote
Old 01-27-2018, 01:05 AM   #32
aotte1
Senior Member
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,637
Re: Cutting up 65 cab

Big back window install adhesive and tools
Attached Images
  
aotte1 is offline   Reply With Quote
Old 01-27-2018, 01:09 AM   #33
aotte1
Senior Member
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,637
Re: Cutting up 65 cab

Tools
Attached Images
  
aotte1 is offline   Reply With Quote
Old 01-27-2018, 12:48 PM   #34
ScottH
Senior Member
 
ScottH's Avatar
 
Join Date: Sep 2002
Location: Hampstead, NC
Posts: 8,179
Re: Cutting up 65 cab

Mack, finally had a chance to check out my floor (had to remove several "patches"). What u have outlined looks close. On the back section I only need to where it begins to slope down & starts to narrow. Also on the sides if u can include around 3" of the floor on the drivers side in the area where the hole is cut , that would be great. Shipping is to 08753.

Thanks very much.
Scott
__________________
1963 C10 swb fleetside
1966 GMC G1000 Handi-bus (future project)
1955 Chevy 2 dr. wagon
2008 Corvette convertible
ScottH is offline   Reply With Quote
Old 01-28-2018, 08:52 PM   #35
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

Quote:
Originally Posted by fredhlynch2 View Post
Need bracket and pedals for the brake and clutch. Zip code is 54935
Is this the only peices you need? If so $50.00 to your door. And I'm going to need to find a box.
Attached Images
  
Mack B is offline   Reply With Quote
Old 01-28-2018, 08:58 PM   #36
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

Quote:
Originally Posted by jasons View Post
I think I can work with that. I'd take from the instrument panel opening to the glove box opening and a few inches on the top. Kind of like this, a couple more inches to each side would be good.
I got this cut out. Of course I made things worse by cutting into the ashtray bracket. If you still want it, its $30.00 to your door
Attached Images
  
Mack B is offline   Reply With Quote
Old 01-28-2018, 09:10 PM   #37
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

Quote:
Originally Posted by ScottH View Post
Mack, finally had a chance to check out my floor (had to remove several "patches"). What u have outlined looks close. On the back section I only need to where it begins to slope down & starts to narrow. Also on the sides if u can include around 3" of the floor on the drivers side in the area where the hole is cut , that would be great. Shipping is to 08753.

Thanks very much.
Scott
Hey Scott, the passenger side was in worse shape than it appeared, the middle is decent, where it meets the toe board and the step up to go under the seat though are rough. If this still fits your needs and you want it it's $50.00 to your door, if you need a better piece I understand that as well.

Thanks!
Attached Images
    
Mack B is offline   Reply With Quote
Old 01-28-2018, 09:13 PM   #38
62 short step
Senior Member
 
62 short step's Avatar
 
Join Date: Aug 2005
Location: Greenwell Springs, Louisiana
Posts: 2,882
Re: Cutting up 65 cab

I'll get in line for the dash/radio cut out.
__________________
www.louisianaclassictruckclub.com


1965 c-10
86 chevy c/k 20
62 short step is offline   Reply With Quote
Old 01-28-2018, 10:19 PM   #39
DPowers
One foot in front of the other
 
DPowers's Avatar
 
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,421
Re: Cutting up 65 cab

Quote:
Originally Posted by Mack B View Post
I need the brackets for my project, but I will get the panel to your door for $30.00
Thanks and understand-will pass.
DPowers is offline   Reply With Quote
Old 01-29-2018, 12:22 AM   #40
ScottH
Senior Member
 
ScottH's Avatar
 
Join Date: Sep 2002
Location: Hampstead, NC
Posts: 8,179
Re: Cutting up 65 cab

Mack, thanks 4 the pics. I should be able to make that work.
Send me ur paypal info & I will send u payment.

Scott
__________________
1963 C10 swb fleetside
1966 GMC G1000 Handi-bus (future project)
1955 Chevy 2 dr. wagon
2008 Corvette convertible
ScottH is offline   Reply With Quote
Old 01-29-2018, 08:53 AM   #41
jasons
not enough hours in the day
 
jasons's Avatar
 
Join Date: Jan 2009
Location: Axtell, NE
Posts: 550
Re: Cutting up 65 cab

I'll take it. What's your paypal info?

Quote:
Originally Posted by Mack B View Post
I got this cut out. Of course I made things worse by cutting into the ashtray bracket. If you still want it, its $30.00 to your door
__________________
65 K-10 Short Step
68 C-50
70 K-5
85 K-10
& piles of spare parts
jasons is offline   Reply With Quote
Old 01-29-2018, 01:51 PM   #42
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

ScottH and Jasons, y'all both have pm's. Thanks!
Mack B is offline   Reply With Quote
Old 02-01-2018, 12:16 AM   #43
TimE
Hey Y'all!!
 
TimE's Avatar
 
Join Date: Dec 2007
Location: Bay Minette, Alabama
Posts: 1,755
Re: Cutting up 65 cab

How is the roof top panel? Is it rotten around the gutter edges? If it's solid(but what in south AL is though, right?)let me know a price. If you're not too far of a drive, I could pick it up.
__________________
Just hopin' I live long enough to finish something!!!
TimE is offline   Reply With Quote
Old 02-01-2018, 12:45 AM   #44
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

Quote:
Originally Posted by TimE View Post
How is the roof top panel? Is it rotten around the gutter edges? If it's solid(but what in south AL is though, right?)let me know a price. If you're not too far of a drive, I could pick it up.
Hello sir! The roof on this one is junk, but the gentleman that I got this truck from had another that was in better shape. He likely won't cut it off but expressed interest in selling the whole truck a few weeks ago. I could get you his number and possibly get some pictures if that interests you.

There is another (or was, been a while) in a yard just across the state line in Bratt Florida that was wrecked in the rear but the sheet metal was pretty solid otherwise.

I'm about 20 miles north east of Bay Minette. Happy to help anyway I can.
Mack B is offline   Reply With Quote
Old 02-01-2018, 09:26 AM   #45
TimE
Hey Y'all!!
 
TimE's Avatar
 
Join Date: Dec 2007
Location: Bay Minette, Alabama
Posts: 1,755
Re: Cutting up 65 cab

Cool! I hit you up in a PM...
__________________
Just hopin' I live long enough to finish something!!!
TimE is offline   Reply With Quote
Old 02-08-2018, 07:53 PM   #46
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

Quote:
Originally Posted by TimE View Post
Cool! I hit you up in a PM...
Tim, I didn't see this message, also I didn't get a pm. Just didn't want you to think I was ignoring you.
Mack B is offline   Reply With Quote
Old 08-11-2018, 10:18 AM   #47
made2drag
Registered User
 
made2drag's Avatar
 
Join Date: Nov 2009
Location: alabama
Posts: 2,079
Re: Cutting up 65 cab

I need the driver door. I'm near Montgomery al
made2drag is offline   Reply With Quote
Old 08-12-2018, 01:54 AM   #48
Mack B
Registered User
 
Mack B's Avatar
 
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
Re: Cutting up 65 cab

Quote:
Originally Posted by made2drag View Post
I need the driver door. I'm near Montgomery al
If you have a door already it's likely as good as this one or better. I also cut the lower inside door panel off for another member already.
Mack B is offline   Reply With Quote
Old 08-13-2018, 09:49 AM   #49
made2drag
Registered User
 
made2drag's Avatar
 
Join Date: Nov 2009
Location: alabama
Posts: 2,079
Re: Cutting up 65 cab

Quote:
Originally Posted by Mack B View Post
If you have a door already it's likely as good as this one or better. I also cut the lower inside door panel off for another member already.
I bought a 64 with no driver door, so any door is better than nothing .... how much do you need for it?
made2drag is offline   Reply With Quote
Old 08-13-2018, 11:46 PM   #50
ScottH
Senior Member
 
ScottH's Avatar
 
Join Date: Sep 2002
Location: Hampstead, NC
Posts: 8,179
Re: Cutting up 65 cab

Mack, any chance the steering column is available?
__________________
1963 C10 swb fleetside
1966 GMC G1000 Handi-bus (future project)
1955 Chevy 2 dr. wagon
2008 Corvette convertible
ScottH is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com