Sorely needed new parts! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Heartbeat** · 10-16-2019, 12:34 PM

Sorely needed new parts now available. 1967 to 1972 Complete "A" Pillar assemblies and Outer Pillar. These parts should save many more trucks. This is not a for sale add so please do not inquire on the thread. It is merely meant to be informative for the guys who need them. WES

**special-K** · 10-16-2019, 12:47 PM

Those really are break through parts right there. This is great. Certainly many cab issues are found in these areas

**1971Stepside** · 10-16-2019, 01:35 PM

So you basically just need a roof and the back of the cab now? Glad to see these being made.

toolboxchev · 10-16-2019, 02:24 PM

There is a light at the end of the tunnel!

What about the 3rd inner cowl piece or is someone making that with the floor attached?

35boulder · 10-16-2019, 05:11 PM

I agree with the others, nice piece.

jaros44sr · 10-16-2019, 05:15 PM

Where are they being made and what gauge metal are they?

Thanks Wes, for keeping sorely needed parts available to us. You did a great job on the gusset and screw on the 72 only doors for blazers.

I'll be ordering a set after I get my truck running, Hated to think that I was going to have to use rusty OEM parts

72c20customcamper · 10-16-2019, 05:17 PM

Very nice piece.

A whole cab would work too

toolboxchev · 10-17-2019, 01:48 PM

Quote:

Originally Posted by 72c20customcamper

Very nice piece.

A whole cab would work too

Some one is and others will start offering them. Check Rtech Fabrications.

**Jason Banks** · 10-17-2019, 04:53 PM

After spending 4-5 hours today drilling spotwelds and pulling the other cowl off. Man, it would be a lot of work to replace that part.

**Grumpy old man** · 10-17-2019, 05:37 PM

It won't be long before a complete cab will be available , Think Dynacorn .

http://www.dynacornclassicbodies.com/

you can already buy a 47-54 cab - http://www.dynacornclassicbodies.com...let-truck-cab/

The price of rotten /rusted away trucks with a vin plate and clean , clear title will skyrocket ^

**desert-rat** · 10-17-2019, 05:41 PM

Nice piece. Should help a lot of trucks. I'm replacing the lower section of both pillars near the floor.

**Grumpy old man** · 10-17-2019, 05:42 PM

Dynacorn cabs

57taskforce · 10-17-2019, 10:53 PM

Quote:

Originally Posted by Grumpy old man

Dynacorn cabs

I haven’t followed the 55-59 cabs as much in the last few years but about 5 years ago you could buy a new cab from dynacorn as well.

10-16-2019, 12:34 PM	#1
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Sorely needed new parts! Sorely needed new parts now available. 1967 to 1972 Complete "A" Pillar assemblies and Outer Pillar. These parts should save many more trucks. This is not a for sale add so please do not inquire on the thread. It is merely meant to be informative for the guys who need them. WES Attached Images __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

10-16-2019, 12:47 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Sorely needed new parts! Those really are break through parts right there. This is great. Certainly many cab issues are found in these areas __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 10-16-2019 at 12:58 PM.

10-16-2019, 01:35 PM	#3
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Re: Sorely needed new parts! So you basically just need a roof and the back of the cab now? Glad to see these being made. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

10-16-2019, 02:24 PM	#4
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Sorely needed new parts! There is a light at the end of the tunnel! What about the 3rd inner cowl piece or is someone making that with the floor attached?

10-16-2019, 05:11 PM	#5
35boulder Registered User Join Date: Oct 2015 Location: Dallas Texas Posts: 1,380	Re: Sorely needed new parts! I agree with the others, nice piece.

10-16-2019, 05:15 PM	#6
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Sorely needed new parts! Where are they being made and what gauge metal are they? Thanks Wes, for keeping sorely needed parts available to us. You did a great job on the gusset and screw on the 72 only doors for blazers. I'll be ordering a set after I get my truck running, Hated to think that I was going to have to use rusty OEM parts __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

10-16-2019, 05:17 PM	#7
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,121	Re: Sorely needed new parts! Very nice piece. A whole cab would work too __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

10-17-2019, 04:53 PM	#9
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,494	Re: Sorely needed new parts! After spending 4-5 hours today drilling spotwelds and pulling the other cowl off. Man, it would be a lot of work to replace that part.

10-17-2019, 05:37 PM	#10
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Sorely needed new parts! It won't be long before a complete cab will be available , Think Dynacorn . http://www.dynacornclassicbodies.com/ you can already buy a 47-54 cab - http://www.dynacornclassicbodies.com...let-truck-cab/ The price of rotten /rusted away trucks with a vin plate and clean , clear title will skyrocket ^ __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

10-17-2019, 05:41 PM	#11
desert-rat Senior Member Join Date: Jan 2013 Location: 3,018 feet above the SoCal/Mojave Desert region. Posts: 349	Re: Sorely needed new parts! Nice piece. Should help a lot of trucks. I'm replacing the lower section of both pillars near the floor.

10-17-2019, 05:42 PM	#12
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Sorely needed new parts! Dynacorn cabs Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.