where are all the 6 bangers? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

78ChevySilverado · 10-10-2008, 03:04 PM

Here's some pics...Original down to the GM radiator hoses!

D13 · 10-23-2008, 07:34 PM

There's two in the garage shot a 63 Nova 194 and a 73 Camaro 250. (the really orange one is an Allis 4-cyl). One in the red 81 GMC (it's on its 2nd motor at 56k, hate integral heads with cracks and vacuum leaks. Lived its life on the farm in 1st gear. Still has the factory tires on the front). And one on the 84 chassis, about 60k miles, complete with its PS.

manimal · 11-07-2008, 10:10 AM

bringin it back up...

bucket · 11-07-2008, 12:47 PM

my newly rebuilt 261....

manimal · 11-07-2008, 07:47 PM

Quote:

Originally Posted by bucket

my newly rebuilt 261....

Very Nice!

manimal · 11-07-2008, 07:51 PM

Here are a few pics of ones I have saved on my 'puter

manimal · 11-07-2008, 07:53 PM

and one more...

Green77c10 · 11-07-2008, 09:35 PM

love this six! mines an integral with everything factory, but the simplicity and torque of it is nothing to complain about even with a stock setup. Of course, im not leaving it stock...

manimal · 11-08-2008, 11:01 AM

over 1600 views and only 58 posts? C'mon there has to more 6ers out there.
-Lance

2bits · 11-08-2008, 01:00 PM

I guess since this is a new engine I can post mine again??? Mercruiser 165hp 250ci, Offenhauser 4bbl intake. A Holley 390 4bbl coming soon, Rodchester 2bbl installed right now.

manimal · 11-08-2008, 02:37 PM

Hey Thomas, how does that thing run with a 2bbl?
-Lance

2bits · 11-09-2008, 05:48 PM

Hey Lance,

It runs great actually. I was worried since the CFM for 2bbl carbs I believe is 500. I am looking forward to putting the 390 4bbl on it after I can rebuild it with a help of a friend which will save me some gas mileage compared to the 2bbl, but this one is just fine.

Here's a new pic, I just got the Air Conditioning back installed with the new bracket. I had to make the bottom half of it, as well as the throttle bracket. Doing a Blazer tank conversion and selling the old engine tonight!

Green77c10: I like your truck, it reminds me of my first stepside!

Green77c10 · 11-09-2008, 10:55 PM

Im saving up for an offy intake and i think Im going to go with the Edelbrock Thunder AVS 500 cfm. that should be interesting...

Green77c10 · 11-09-2008, 10:55 PM

have to finish my head conversion though.. darn that integral!

2bits · 11-10-2008, 06:12 PM

Simple enough, get you a junkyard head/intake and exhaust and have the head redone. You can do the upgrades later. I know $$$ is the key right! I just stumbled across my intake and couldn't let it go since it came with the engine

Green77c10 · 11-11-2008, 10:04 AM

im workin on it, got all the parts and got the head resurfaced, need to clean up the valves tho. trying to decide if i wanna save up and oversize the valves

manimal · 06-02-2009, 10:12 PM

I know it's a little outdated,but back to the top!
-Lance

Mr79C10 · 06-03-2009, 05:34 AM

agree

StepinNJ · 06-18-2009, 10:01 PM

Here's my 79 GMC with 90,404 miles. Still running strong as ever.
Auto with A/C.

SBTork · 06-18-2009, 10:35 PM

here is the 4.1/4 speed manual w/od in my '82 that is currently part of a frame off resto-mod. I ditched the inline 6 and 4 speed although it worked really well.
Here are some pics I took at a gas station a few miles after I bought it earlier this year, notice the previous owners duct tape vent window

...

D13 · 06-19-2009, 05:54 AM

Quote:

Originally Posted by SBTork

here is the 4.1/4 speed manual w/od in my '82 that is currently part of a frame off resto-mod. I ditched the inline 6 and 4 speed although it worked really well.

[]

Did it have enough power to run OD at 45-55 without having to shift to direct? I've got my eye on an 84 A-833 truck with a popped 305, and have a couple of L-6's that could use a home. Just been wondering if the combo is really driveable.

SBTork · 06-19-2009, 06:47 AM

Quote:

Originally Posted by D13

Did it have enough power to run OD at 45-55 without having to shift to direct? I've got my eye on an 84 A-833 truck with a popped 305, and have a couple of L-6's that could use a home. Just been wondering if the combo is really driveable.

I did not drive it much at highway speeds in OD, but it was way more powerful than I thought. I remember pulling onto the highway and saying to myself, this is going to suck, but I looked down and I was doing 65 in 3rd gear, then I shifted into OD and rode just fine.

East End K5 · 06-19-2009, 06:48 AM

6's are straight if you know what i mean.......my buddy had one in his 69 nova.....man what an engine. Took a beating and I swear I thought it was a small block...if there was one thing chevy did well was those bow tie beauties!

72BlckButy · 06-19-2009, 08:06 AM

Since this is back ttt, what kind of mufflers are you guys running on your I6's?

manimal · 06-19-2009, 08:55 AM

I've had Flowmaster,MagnaFlo,and DynoMax and like the Dynomax the best.
-Lance

10-10-2008, 03:04 PM	#51
78ChevySilverado I love my Chevys Join Date: Jun 2004 Location: Montgomery, Texas Posts: 236	Re: where are all the 6 bangers? Here's some pics...Original down to the GM radiator hoses! Last edited by 78ChevySilverado; 10-10-2008 at 03:05 PM. Reason: pics broke

10-23-2008, 07:34 PM	#52
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: where are all the 6 bangers? There's two in the garage shot a 63 Nova 194 and a 73 Camaro 250. (the really orange one is an Allis 4-cyl). One in the red 81 GMC (it's on its 2nd motor at 56k, hate integral heads with cracks and vacuum leaks. Lived its life on the farm in 1st gear. Still has the factory tires on the front). And one on the 84 chassis, about 60k miles, complete with its PS. Attached Images __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors Last edited by D13; 10-23-2008 at 07:40 PM.

11-07-2008, 10:10 AM	#53
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: where are all the 6 bangers? bringin it back up... Attached Images __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

11-07-2008, 12:47 PM	#54
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: where are all the 6 bangers? my newly rebuilt 261.... Attached Images __________________ 79 K10 77 MGB 79 Kawasaki KZ1000

11-07-2008, 07:51 PM	#56
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: where are all the 6 bangers? Here are a few pics of ones I have saved on my 'puter Attached Images __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

11-07-2008, 07:53 PM	#57
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: where are all the 6 bangers? and one more... Attached Images __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

11-07-2008, 09:35 PM	#58
Green77c10 Registered User Join Date: Apr 2008 Location: Portland, OR Posts: 70	Re: where are all the 6 bangers? love this six! mines an integral with everything factory, but the simplicity and torque of it is nothing to complain about even with a stock setup. Of course, im not leaving it stock...

11-08-2008, 11:01 AM	#59
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: where are all the 6 bangers? over 1600 views and only 58 posts? C'mon there has to more 6ers out there. -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

11-08-2008, 01:00 PM	#60
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: where are all the 6 bangers? I guess since this is a new engine I can post mine again??? Mercruiser 165hp 250ci, Offenhauser 4bbl intake. A Holley 390 4bbl coming soon, Rodchester 2bbl installed right now. Attached Images __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club Last edited by 2bits; 11-08-2008 at 01:03 PM.

11-08-2008, 02:37 PM	#61
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: where are all the 6 bangers? Hey Thomas, how does that thing run with a 2bbl? -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

11-09-2008, 05:48 PM	#62
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: where are all the 6 bangers? Hey Lance, It runs great actually. I was worried since the CFM for 2bbl carbs I believe is 500. I am looking forward to putting the 390 4bbl on it after I can rebuild it with a help of a friend which will save me some gas mileage compared to the 2bbl, but this one is just fine. Here's a new pic, I just got the Air Conditioning back installed with the new bracket. I had to make the bottom half of it, as well as the throttle bracket. Doing a Blazer tank conversion and selling the old engine tonight! Green77c10: I like your truck, it reminds me of my first stepside! Attached Images __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club Last edited by 2bits; 11-09-2008 at 05:49 PM.

11-09-2008, 10:55 PM	#63
Green77c10 Registered User Join Date: Apr 2008 Location: Portland, OR Posts: 70	Re: where are all the 6 bangers? Im saving up for an offy intake and i think Im going to go with the Edelbrock Thunder AVS 500 cfm. that should be interesting...

11-09-2008, 10:55 PM	#64
Green77c10 Registered User Join Date: Apr 2008 Location: Portland, OR Posts: 70	Re: where are all the 6 bangers? have to finish my head conversion though.. darn that integral!

11-10-2008, 06:12 PM	#65
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: where are all the 6 bangers? Simple enough, get you a junkyard head/intake and exhaust and have the head redone. You can do the upgrades later. I know $$$ is the key right! I just stumbled across my intake and couldn't let it go since it came with the engine __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club

11-11-2008, 10:04 AM	#66
Green77c10 Registered User Join Date: Apr 2008 Location: Portland, OR Posts: 70	Re: where are all the 6 bangers? im workin on it, got all the parts and got the head resurfaced, need to clean up the valves tho. trying to decide if i wanna save up and oversize the valves



Register or Log In To remove these advertisements.

06-02-2009, 10:12 PM	#67
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: where are all the 6 bangers? I know it's a little outdated,but back to the top! -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

06-03-2009, 05:34 AM	#68
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: where are all the 6 bangers? agree __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

06-18-2009, 10:01 PM	#69
StepinNJ TuTone Silverado Join Date: Mar 2007 Location: Central NJ Posts: 196	Re: where are all the 6 bangers? Here's my 79 GMC with 90,404 miles. Still running strong as ever. Auto with A/C. Attached Images __________________ 13 Corvette GS vert 13 Ram Laramie Longhorn 11 Wrangler Sahara unlimited 08 300 76 El Camino 67 Bel Air sedan 63 Corvette SWC 08 HD Road King Classic 68 HD Golf car

06-18-2009, 10:35 PM	#70
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,856	Re: where are all the 6 bangers? here is the 4.1/4 speed manual w/od in my '82 that is currently part of a frame off resto-mod. I ditched the inline 6 and 4 speed although it worked really well. Here are some pics I took at a gas station a few miles after I bought it earlier this year, notice the previous owners duct tape vent window ... __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

06-19-2009, 06:48 AM	#73
East End K5 Registered User Join Date: Nov 2004 Location: Long Island NY Posts: 293	Re: where are all the 6 bangers? 6's are straight if you know what i mean.......my buddy had one in his 69 nova.....man what an engine. Took a beating and I swear I thought it was a small block...if there was one thing chevy did well was those bow tie beauties! __________________ I feel sorry for people who don't drink....because when they wake up in the morning, that's the best they're gonna feel all day long!---Frank Sinatra RIP [B]1972 Chevrolet K5 Blazer RIP 1986 GMC Sierra K3500 1TON, Long Box, V8350 RIP 1980 Chevy Silverado C30 Cab and Chassis, 454 TH400HD. RIP [B] 1995 Chevrolet Tahoe 2D [B]

06-19-2009, 08:06 AM	#74
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: where are all the 6 bangers? Since this is back ttt, what kind of mufflers are you guys running on your I6's? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-19-2009, 08:55 AM	#75
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: where are all the 6 bangers? I've had Flowmaster,MagnaFlo,and DynoMax and like the Dynomax the best. -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

Register or Log In To remove these advertisements.