Canada Polished 409 Factory GM Dual Quad Intake Manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bobinbc** · 06-21-2019, 05:59 PM

I'm going to list this here for anyone interested. It's a factory dual quad intake for Chevy 409 engines, with the Winters foundry mark on it. It hasn't been blasted or glass beaded, just polished and it looks real nice. It hasn't been run since it was polished, and it's in excellent shape, no corrosion around the thermostat hole, no welds or cracks etc. I'm asking $525 USD or $650 CAN, about the same price as a plain cast intake from Edelbrock but much rarer and cooler

Pretty firm on the price and I'll ship it to Can/US for $25

**bobinbc** · 06-21-2019, 06:28 PM

Casting date

crossfire84 · 06-25-2019, 06:24 PM

It's too bad it's polished now, useless to a restoration project but good luck on your listing.

**bobinbc** · 06-25-2019, 09:32 PM

Well, you could bead blast it and have an absolutely perfect one for restoration... but this is perfect for someone who wants to go a step beyond a stock resto.

**bobinbc** · 07-03-2019, 03:46 AM

sold

06-21-2019, 05:59 PM	#1
bobinbc Senior Member Join Date: Mar 2009 Location: Vancouver Island, Courtenay B.C. CANADA Posts: 575	Polished 409 Factory GM Dual Quad Intake Manifold I'm going to list this here for anyone interested. It's a factory dual quad intake for Chevy 409 engines, with the Winters foundry mark on it. It hasn't been blasted or glass beaded, just polished and it looks real nice. It hasn't been run since it was polished, and it's in excellent shape, no corrosion around the thermostat hole, no welds or cracks etc. I'm asking $525 USD or $650 CAN, about the same price as a plain cast intake from Edelbrock but much rarer and cooler Pretty firm on the price and I'll ship it to Can/US for $25 Attached Images __________________ 1962 Chevy blue SBFS 1957 Chevy yellow SBSS 1956 GMC red SBSS Nov 2017 ToTM https://www.facebook.com/groups/Cana...geChevyTrucks/ Last edited by bobinbc; 06-21-2019 at 07:05 PM.

06-21-2019, 06:28 PM	#2
bobinbc Senior Member Join Date: Mar 2009 Location: Vancouver Island, Courtenay B.C. CANADA Posts: 575	Re: Polished 409 Factory GM Dual Quad Intake Manifold Casting date Attached Images __________________ 1962 Chevy blue SBFS 1957 Chevy yellow SBSS 1956 GMC red SBSS Nov 2017 ToTM https://www.facebook.com/groups/Cana...geChevyTrucks/

06-25-2019, 06:24 PM	#3
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,747	Re: Polished 409 Factory GM Dual Quad Intake Manifold It's too bad it's polished now, useless to a restoration project but good luck on your listing. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

06-25-2019, 09:32 PM	#4
bobinbc Senior Member Join Date: Mar 2009 Location: Vancouver Island, Courtenay B.C. CANADA Posts: 575	Re: Polished 409 Factory GM Dual Quad Intake Manifold Well, you could bead blast it and have an absolutely perfect one for restoration... but this is perfect for someone who wants to go a step beyond a stock resto. Attached Images __________________ 1962 Chevy blue SBFS 1957 Chevy yellow SBSS 1956 GMC red SBSS Nov 2017 ToTM https://www.facebook.com/groups/Cana...geChevyTrucks/

07-03-2019, 03:46 AM	#5
bobinbc Senior Member Join Date: Mar 2009 Location: Vancouver Island, Courtenay B.C. CANADA Posts: 575	Re: Polished 409 Factory GM Dual Quad Intake Manifold sold __________________ 1962 Chevy blue SBFS 1957 Chevy yellow SBSS 1956 GMC red SBSS Nov 2017 ToTM https://www.facebook.com/groups/Cana...geChevyTrucks/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.