68swb build up AKA (Baglady) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

04 orange · 11-20-2006, 01:30 AM

I have finally decided to start a thread for my project. Its a 1968 swb original v8 three speed truck. I wanted to do a fast build and just get it running and drive it. But after getting in to it that went out the door. Know a year later its bagged and lays frame and there is still a lot to do. I have decided that I am going for the rat rod look with the primer, eventually the white wall tires on the 15in wheels and a pic of a pinup on the doors.

kyull67 · 11-20-2006, 01:34 AM

Looks good!

**Canadian694x4** · 11-20-2006, 01:37 AM

Saweeet!

abadsvt · 11-20-2006, 01:46 AM

Looks like a good start!!!! How tall is your rear tires? Also is your frame touching the rear end? I am curious how much bed i will have left when i am done with my truck. Anyways good job and keep up the work!!

Josh

04 orange · 11-20-2006, 01:48 AM

Here's what i got done this weekend. Finally got the motor done. Bolted the motor and trans together and set it in and started cutting the firewall for the trans tunnel. Found out that I can't run an HEI distributor that sux, it won't clear the firewall. Not sure if i want to cut the top of the firewall yet to make it fit. What are you other bagged guys running for a distributor.

FnLow69 · 11-20-2006, 02:16 AM

hey i have a "evil twin" LOL just kidding look really close to mine.... was mounting up bed a pain it the a$$, i know mine was?

70rs/ss · 11-20-2006, 11:49 AM

You can use a small cap hei or a unilite small caps can come with all kinds of goodies underneath. You could even convert a points ignition to a magnetic breakerless for about $75. Good luck and she looks sweet. I'dve left it the way she was, but this is cool as well!

powell72 · 11-20-2006, 07:45 PM

Looks good, keep us posted on it.

qksilver · 11-20-2006, 08:54 PM

Sweet

04 orange · 11-21-2006, 08:43 PM

Quote:

Originally Posted by abadsvt

Looks like a good start!!!! How tall is your rear tires? Also is your frame touching the rear end? I am curious how much bed i will have left when i am done with my truck. Anyways good job and keep up the work!!

Josh

The frame is laying on the rear end with no bump stops. The tires on the back right now are 245/75R-15. The bed is only 9 1/4 deep all they way around right now.

Rick Mills · 11-21-2006, 09:10 PM

I like how it looks! Great stance.

SCOTI · 11-21-2006, 10:25 PM

04 Orange & FnLow69..... How much did you guys 'Z' your frames?

As for the dizzy, MSD makes a sweet (and compact) billet dizzy that drops right in & is electronic like the HEI.

jimmydean · 11-21-2006, 11:21 PM

Man, that looks great with the flat floor!

Litemup · 11-21-2006, 11:27 PM

Wow looks really nice!

04 orange · 11-22-2006, 12:16 AM

Quote:

Originally Posted by SCOTI

04 Orange & FnLow69..... How much did you guys 'Z' your frames?

As for the dizzy, MSD makes a sweet (and compact) billet dizzy that drops right in & is electronic like the HEI.

The frame on mine is z'd 6in. We just stacked the frame rails on top of each other.

krue · 11-22-2006, 02:30 AM

That truck would look good if you lowered it a little bit.

AesC10s · 11-22-2006, 03:19 AM

Quote:

Originally Posted by 04 orange

The frame on mine is z'd 6in. We just stacked the frame rails on top of each other.

Why such a big Z?

FnLow69 · 11-22-2006, 12:21 PM

Quote:

Originally Posted by SCOTI

04 Orange & FnLow69..... How much did you guys 'Z' your frames?

As for the dizzy, MSD makes a sweet (and compact) billet dizzy that drops right in & is electronic like the HEI.

i Z'ed mine 3" w/ 2.5" drop spindles

1LoC10 · 11-22-2006, 07:51 PM

lookin good, I thought it was another post by FnLow69 when i first looked at it

04 orange · 11-23-2006, 12:30 AM

Quote:

Originally Posted by AesC10s

Why such a big Z?

Well I was trying to make it lay frame without having to buy spindles and control arms. It worked at first till I completely rebuilt the entire front end with everything new. After I did that it raised the frame up 3in so I had to put drop spindles on it anyway to get it back down on the ground. If I had realized that it wasn't going to work right I wouldn't have z'd it that much.

04 orange · 12-17-2006, 10:56 PM

I got to work on the truck this weekend got alot done. Finished cutting the floor out. Painted and hung the doors, put the bed back on and started cutting the fender out to make it fit. Still have to adjust the bed it looks like it is sitting a little high in the rear and i got to find a 67 passenger side fender.

68GMC454 · 12-17-2006, 11:58 PM

man it looks great...i would love to see mine like that,,but with a bad back i cant have my knees up around my neck when driving..or it could be the frind i had that had a s10 like this,,was just built wrong..main thing is i got to be comfortable while driveing,,but i still love the body drop look..

Rokcrln · 12-18-2006, 12:14 AM

Darn both you guys make me feel like mine is a 4x4

Fully dropped I still have about 1" under my rockers!

Looking good, both of you!

Kevin
LFD Inc.

Zumo · 03-07-2007, 05:46 PM

Any progress?

GREASEMONKEY72 · 03-07-2007, 10:37 PM

i second the any progress???

btw thats a *****in lookin truck man

11-20-2006, 01:30 AM	#1
04 orange Registered User Join Date: Sep 2006 Location: Midlothian, Tx Posts: 144	68swb build up AKA (Baglady) I have finally decided to start a thread for my project. Its a 1968 swb original v8 three speed truck. I wanted to do a fast build and just get it running and drive it. But after getting in to it that went out the door. Know a year later its bagged and lays frame and there is still a lot to do. I have decided that I am going for the rat rod look with the primer, eventually the white wall tires on the 15in wheels and a pic of a pinup on the doors. Attached Images Last edited by 04 orange; 11-22-2006 at 12:19 AM.

11-20-2006, 01:34 AM	#2
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: 68swb build up AKA (Baglady) Looks good!

11-20-2006, 01:37 AM	#3
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	Re: 68swb build up AKA (Baglady) Saweeet! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

11-20-2006, 01:46 AM	#4
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: 68swb build up AKA (Baglady) Looks like a good start!!!! How tall is your rear tires? Also is your frame touching the rear end? I am curious how much bed i will have left when i am done with my truck. Anyways good job and keep up the work!! Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

11-20-2006, 01:48 AM	#5
04 orange Registered User Join Date: Sep 2006 Location: Midlothian, Tx Posts: 144	Re: 68swb build up AKA (Baglady) Here's what i got done this weekend. Finally got the motor done. Bolted the motor and trans together and set it in and started cutting the firewall for the trans tunnel. Found out that I can't run an HEI distributor that sux, it won't clear the firewall. Not sure if i want to cut the top of the firewall yet to make it fit. What are you other bagged guys running for a distributor. Attached Images Last edited by 04 orange; 11-22-2006 at 12:20 AM.

11-20-2006, 02:16 AM	#6
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: 68swb build up AKA (Baglady) hey i have a "evil twin" LOL just kidding look really close to mine.... was mounting up bed a pain it the a$$, i know mine was? __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

11-20-2006, 11:49 AM	#7
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: 68swb build up AKA (Baglady) You can use a small cap hei or a unilite small caps can come with all kinds of goodies underneath. You could even convert a points ignition to a magnetic breakerless for about $75. Good luck and she looks sweet. I'dve left it the way she was, but this is cool as well!

11-20-2006, 07:45 PM	#8
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: 68swb build up AKA (Baglady) Looks good, keep us posted on it. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

11-20-2006, 08:54 PM	#9
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 68swb build up AKA (Baglady) Sweet

11-21-2006, 09:10 PM	#11
Rick Mills Senior Member Join Date: Dec 2003 Location: Colorado Posts: 351	Re: 68swb build up AKA (Baglady) I like how it looks! Great stance. __________________ The Fastor Pastor '68 swb, 447 BBC/ 6-71 Weiand, Dual 950 Bigs Carbs/ 2 1/2" Header tubes - 4" collectors/ M-21 4speed: '70 swb; TH-400 - bagged & shaved. Looking for new engine or parts. Wife - Original {A Real Classic!}

11-21-2006, 10:25 PM	#12
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,907	Re: 68swb build up AKA (Baglady) 04 Orange & FnLow69..... How much did you guys 'Z' your frames? As for the dizzy, MSD makes a sweet (and compact) billet dizzy that drops right in & is electronic like the HEI. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-21-2006, 11:21 PM	#13
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: 68swb build up AKA (Baglady) Man, that looks great with the flat floor!

11-21-2006, 11:27 PM	#14
Litemup Steel Horse Cowboy Join Date: Oct 2006 Location: Tacoma, WA Posts: 89	Re: 68swb build up AKA (Baglady) Wow looks really nice!

11-22-2006, 02:30 AM	#16
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: 68swb build up AKA (Baglady) That truck would look good if you lowered it a little bit. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-22-2006, 07:51 PM	#19
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: 68swb build up AKA (Baglady) lookin good, I thought it was another post by FnLow69 when i first looked at it __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << Last edited by 1LoC10; 11-22-2006 at 07:54 PM.



Register or Log In To remove these advertisements.

12-17-2006, 10:56 PM	#21
04 orange Registered User Join Date: Sep 2006 Location: Midlothian, Tx Posts: 144	Re: 68swb build up AKA (Baglady) I got to work on the truck this weekend got alot done. Finished cutting the floor out. Painted and hung the doors, put the bed back on and started cutting the fender out to make it fit. Still have to adjust the bed it looks like it is sitting a little high in the rear and i got to find a 67 passenger side fender. Attached Images

12-17-2006, 11:58 PM	#22
68GMC454 THE VILLIAGE IDIOT Join Date: Nov 2006 Location: Tooele, Utah Posts: 1,405	Re: 68swb build up AKA (Baglady) man it looks great...i would love to see mine like that,,but with a bad back i cant have my knees up around my neck when driving..or it could be the frind i had that had a s10 like this,,was just built wrong..main thing is i got to be comfortable while driveing,,but i still love the body drop look.. __________________ honestly honey,,i have no idea how that truck got here.

12-18-2006, 12:14 AM	#23
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: 68swb build up AKA (Baglady) Darn both you guys make me feel like mine is a 4x4 Fully dropped I still have about 1" under my rockers! Looking good, both of you! Kevin LFD Inc. Attached Images Last edited by Rokcrln; 12-18-2006 at 12:14 AM.

03-07-2007, 05:46 PM	#24
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: 68swb build up AKA (Baglady) Any progress? __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

03-07-2007, 10:37 PM	#25
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: 68swb build up AKA (Baglady) i second the any progress??? btw thats a *****in lookin truck man __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.