Wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Randy83 · 05-15-2011, 10:49 AM

Has anyone put a set of the 15 by 8 Rally's off of like a 85 chevy 4WD on to a 93 4WD or so? Will they fit and is there any clearance issues, I know originally the 93 has 16's on it...

Thanks

eightyfive · 05-15-2011, 07:45 PM

I put a set from a 85 2wd onto my 88 2wd. They fit nice and look great. No clearance issues at all, but then again thats a 2WD.

benoit454 · 05-15-2011, 09:27 PM

heard of guys doing it, some say they may hit the front caliper, but you can grind it down to clear, other's say it's just fine no issues, bolt pattern is the same so they'll bolt up, but clearance not sure. Downside they stick out more and might cause the tires to rub on the body maybe.

loudnlifted88 · 05-15-2011, 09:31 PM

i have 15x 10s on my 94 and no issues other than tires rub with 3 inches of lift there 33x12.5's

benoit454 · 05-15-2011, 11:33 PM

yea but where do they rub? frame fender? bumper?

loudnlifted88 · 05-16-2011, 10:35 PM

Quote:

Originally Posted by benoit454

yea but where do they rub? frame fender? bumper?

front bumper and fender extender but only when turning

ChevLoRay · 05-16-2011, 10:58 PM

This isn't the wheel you asked about, but may give you some food for thought. These are Wheel Vintiques, 16x7's running 245R70's.

benoit454 · 05-16-2011, 11:13 PM

the less backspacing of the wheels and being 10's mostly being 10's I bet is what caused it to rub out there, 15x8's could possibly clear without rubbing.

pretty cool that you found 10 inch rallys though I haven't seen any that I can think of.

loudnlifted88 · 05-17-2011, 02:55 PM

Quote:

Originally Posted by benoit454

the less backspacing of the wheels and being 10's mostly being 10's I bet is what caused it to rub out there, 15x8's could possibly clear without rubbing.

pretty cool that you found 10 inch rallys though I haven't seen any that I can think of.

if i remeber right they were 10's im pretty sure i measured them but i guess i could be wrong they might be 8's but i thin a 12.5 might be to wide for a 8

benoit454 · 05-17-2011, 07:19 PM

nah we ran 8's on our 86 k10 with 33 12.50's on it, looks good though msn. I was thinking the looked like 8's but I aint sure without being there in person.

loudnlifted88 · 05-18-2011, 08:32 PM

maybe they are but they seemed really wide

05-15-2011, 10:49 AM	#1
Randy83 Registered User Join Date: Sep 2010 Location: Quinlan, TX Posts: 83	Wheels Has anyone put a set of the 15 by 8 Rally's off of like a 85 chevy 4WD on to a 93 4WD or so? Will they fit and is there any clearance issues, I know originally the 93 has 16's on it... Thanks

05-15-2011, 07:45 PM	#2
eightyfive Registered User Join Date: Apr 2010 Location: Swan River Manitoba Canada Posts: 233	Re: Wheels I put a set from a 85 2wd onto my 88 2wd. They fit nice and look great. No clearance issues at all, but then again thats a 2WD. Attached Images __________________ parts truck- 1982 suburban GMC Sierra Classic first project- 1985 GMC Sierra Classic first truck- 1988 GMC Sierra sle "New" Hot rod 1999 Chevy silverado 5.3L ^^^ Workin my way up the food chain

05-15-2011, 09:27 PM	#3
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Wheels heard of guys doing it, some say they may hit the front caliper, but you can grind it down to clear, other's say it's just fine no issues, bolt pattern is the same so they'll bolt up, but clearance not sure. Downside they stick out more and might cause the tires to rub on the body maybe. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

05-15-2011, 09:31 PM	#4
loudnlifted88 Registered User Join Date: Jan 2010 Location: Wales,Maine Posts: 776	Re: Wheels i have 15x 10s on my 94 and no issues other than tires rub with 3 inches of lift there 33x12.5's Attached Images __________________ IM ONLY 18 AND LOVIN IT IF MUD AINT FLYIN YOU AINT TRYIN! 1badgmc- Just think. Someone worked hard to make it look that bad. 1988 chevy stepside 305 five speed Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=383945 1994 GMC ext. cab short box 350 auto Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=438873 1996 GMC 2500 ECSB 454 4l80e: build thread http://www.gmt400.com/forum/showthre...gmc-2500-build 1998 GMC K-1500 ECSB 305 auto partd truck 1999 GMC K2500 suburban 350 4x4 Dads project 1981 Corvette 350 auto Also Dads project 1989 Corvette 350 auto ^^ 1998 GMC K1500 ecsb 305 auto Brothers project

05-15-2011, 11:33 PM	#5
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Wheels yea but where do they rub? frame fender? bumper? __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

05-16-2011, 10:58 PM	#7
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Wheels This isn't the wheel you asked about, but may give you some food for thought. These are Wheel Vintiques, 16x7's running 245R70's. Attached Images __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

05-16-2011, 11:13 PM	#8
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Wheels the less backspacing of the wheels and being 10's mostly being 10's I bet is what caused it to rub out there, 15x8's could possibly clear without rubbing. pretty cool that you found 10 inch rallys though I haven't seen any that I can think of. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454 Last edited by benoit454; 05-16-2011 at 11:14 PM.

05-17-2011, 07:19 PM	#10
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Wheels nah we ran 8's on our 86 k10 with 33 12.50's on it, looks good though msn. I was thinking the looked like 8's but I aint sure without being there in person. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

05-18-2011, 08:32 PM	#11
loudnlifted88 Registered User Join Date: Jan 2010 Location: Wales,Maine Posts: 776	Re: Wheels maybe they are but they seemed really wide __________________ IM ONLY 18 AND LOVIN IT IF MUD AINT FLYIN YOU AINT TRYIN! 1badgmc- Just think. Someone worked hard to make it look that bad. 1988 chevy stepside 305 five speed Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=383945 1994 GMC ext. cab short box 350 auto Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=438873 1996 GMC 2500 ECSB 454 4l80e: build thread http://www.gmt400.com/forum/showthre...gmc-2500-build 1998 GMC K-1500 ECSB 305 auto partd truck 1999 GMC K2500 suburban 350 4x4 Dads project 1981 Corvette 350 auto Also Dads project 1989 Corvette 350 auto ^^ 1998 GMC K1500 ecsb 305 auto Brothers project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.