off it goes - Page 32 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

solidaxel · 01-01-2015, 09:35 AM

Quote:

Originally Posted by 77BBGMC

Yet another nice touch!!

Do I see a market for this item !!!!!

CHROMAHOLIC · 01-01-2015, 11:47 AM

Quote:

Originally Posted by S10Fan

Dude, some of us are senior citizens, (I'm 57") would you please finish this truck before we die! LOL

Seriously, I very much envy both your work ethic and attention to detail, keep it up!

Lol, loan me some money and come help finish it......

**Gregski** · 01-01-2015, 12:44 PM

man with mad fab skills like that, why did you even start with a truck, all it is doing is just slowing you down, LOL, you should have just built one from scratch around just a VIN plate and fabbed it all from scratch (triple dog dare to consider)

**FRENCHBLUE72** · 01-01-2015, 12:45 PM

Beautiful work..

CHROMAHOLIC · 01-01-2015, 01:07 PM

Thanks guys.....it been about a 3 yr. project, as you know with something to this detail and level of build its a time and money thing. A lot of builds take 5-7 years, some guys get half way through and give up....that thought has crossed my mind several times when I get frustrated with it, lol. The truck is at my buddies shop which after my hour drive home from work is another 80 minutes, so truthfully through the week I don't feel like going. Also this year my mother passed away which really knocked the wind out of sails for a few months. I know it seems like forever (no one thinks that more than me, lol) but I think we're doing ok....the light at the end of the tunnel is getting closer. Stay tuned, I think it'll be worth it....and thanks for all the positive feedback and comments��

**Gregski** · 01-01-2015, 03:18 PM

Quote:

Originally Posted by CHROMAHOLIC

The truck is at my buddies shop which after my hour drive home from work is another 80 minutes, so truthfully through the week I don't feel like going.

To anyone reading this, this is the poster guy for blood, sweat, and tears that go into these builds, I thought this man owned his shop and worked on his truck in between other jobs, and lived across the street.

Your hard work will be rewarded as it graces the front covers of many a magazine, and if not, you have already proved what you can do.

Quote:

Originally Posted by CHROMAHOLIC

Also this year my mother passed away which really knocked the wind out of sails for a few months.

I am sorry to hear that, but what if you could find the strength in that and motivation to finish this magnificent build in her honor, maybe dedicate the build to her, wouldn't that be even more amazing.

KQQL IT · 01-01-2015, 04:10 PM

I'm 9 years into my driver. Your doing a fine job

CHROMAHOLIC · 01-01-2015, 04:26 PM

Thanks guys

newmexicosaint · 01-12-2015, 10:15 AM

Impressive to say the least!! wow...

K20chevy · 01-12-2015, 04:00 PM

Sorry to hear about your Mom!! But as someone mentioned, if you dedicate the build to her, that truck will be one thing you´ll keep forever memorizing her everytime you drive it. (did that with may truck when my dad passed away).

Can´t wait for the next outstanding details!

solidaxel · 01-13-2015, 10:02 AM

You have started the year off on the right foot ,keep taking little steps and you will be up and running in no time, stay warm and keep focused!

CHROMAHOLIC · 01-13-2015, 09:17 PM

Thanks guys.....we're plugging along, just laying all the wiring out in it to make sure I don't need to put any brackets or studs anywhere before we do paint and body. It takes longer to do it twice but it makes more sense then trying to do it after paint.

kvn1011 · 01-30-2015, 03:33 PM

im tuned in for this!
awesome build!!

y5mgisi · 01-30-2015, 09:08 PM

Dang! I missed the mesh cover! That is unbelievable!

CHROMAHOLIC · 01-30-2015, 09:39 PM

^^lol, thanks guys...we've been test fitting the wiring so not many new pics, we did the cable driven wipers mounted (hopefully I will never need them but better to be safe then sorry) went cable driven so wiper motor could be hid in cowl area.. We did finish up the rear splash pans, just wanted something to hide compressors and tank but still let in air flow to cool the compressors yet quite them down a bit. Also have a drain for the water trap in the one splash pan and then a drain cock for the tank, both done so things can be drained without removing the splash pans

bbbc10 · 01-30-2015, 10:09 PM

amazing work!!!! any more info on that wiper and install like what brand etc im looking to relocate mine under the cowl too thanks

blazer2007 · 01-31-2015, 11:23 AM

How is the mesh attached to the plate ?

kvn1011 · 02-02-2015, 05:37 PM

wow!!!

CHROMAHOLIC · 02-02-2015, 06:04 PM

the mesh has lip all around it so we pushed it up through from the bottom and then bonded it to the stainless surround

mooseknuckles · 02-02-2015, 06:07 PM

the work on this thing is insane!

CHROMAHOLIC · 02-07-2015, 08:38 PM

Flush mount pop up fuel filler is in....

mooseknuckles · 02-07-2015, 08:41 PM

nice. where is that? ....in the bed ?

CHROMAHOLIC · 02-07-2015, 08:45 PM

Yes sir....bed floor, it will be painted to match the floor

ajgriffin · 02-07-2015, 10:54 PM

That thing is so clean you might not be able to find it if you paint it to match. Strong work!

CDNchevydude · 02-07-2015, 11:30 PM

Quote:

Originally Posted by ajgriffin

That thing is so clean you might not be able to find it if you paint it to match. Strong work!

Lol! Would have said it if you didn't !! This build is so...perfect!

01-01-2015, 12:44 PM	#778
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,803	Re: off it goes man with mad fab skills like that, why did you even start with a truck, all it is doing is just slowing you down, LOL, you should have just built one from scratch around just a VIN plate and fabbed it all from scratch (triple dog dare to consider)

01-01-2015, 12:45 PM	#779
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Re: off it goes Beautiful work.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-01-2015, 01:07 PM	#780
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes Thanks guys.....it been about a 3 yr. project, as you know with something to this detail and level of build its a time and money thing. A lot of builds take 5-7 years, some guys get half way through and give up....that thought has crossed my mind several times when I get frustrated with it, lol. The truck is at my buddies shop which after my hour drive home from work is another 80 minutes, so truthfully through the week I don't feel like going. Also this year my mother passed away which really knocked the wind out of sails for a few months. I know it seems like forever (no one thinks that more than me, lol) but I think we're doing ok....the light at the end of the tunnel is getting closer. Stay tuned, I think it'll be worth it....and thanks for all the positive feedback and comments��

01-01-2015, 04:10 PM	#782
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,130	Re: off it goes I'm 9 years into my driver. Your doing a fine job __________________ " That didnt make it any newer " " Dont antique the equipment "

01-01-2015, 04:26 PM	#783
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes Thanks guys

01-12-2015, 10:15 AM	#784
newmexicosaint Registered User Join Date: Apr 2012 Location: Clovis NM Posts: 30	Re: off it goes Impressive to say the least!! wow...

01-12-2015, 04:00 PM	#785
K20chevy Registered User Join Date: Oct 2012 Location: Pittsfield, ME Posts: 477	Re: off it goes Sorry to hear about your Mom!! But as someone mentioned, if you dedicate the build to her, that truck will be one thing you´ll keep forever memorizing her everytime you drive it. (did that with may truck when my dad passed away). Can´t wait for the next outstanding details! __________________ 78 Chevy K20 Custom Deluxe, build: http://67-72chevytrucks.com/vboard/s...d.php?t=612104 68 Chevy K20 Panel truck, build: http://67-72chevytrucks.com/vboard/s...41#post7263441

01-13-2015, 10:02 AM	#786
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: off it goes You have started the year off on the right foot ,keep taking little steps and you will be up and running in no time, stay warm and keep focused! __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

01-13-2015, 09:17 PM	#787
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes Thanks guys.....we're plugging along, just laying all the wiring out in it to make sure I don't need to put any brackets or studs anywhere before we do paint and body. It takes longer to do it twice but it makes more sense then trying to do it after paint.

01-30-2015, 03:33 PM	#788
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: off it goes im tuned in for this! awesome build!! __________________ My Build Thead (Project Slow Motion)

01-30-2015, 09:08 PM	#789
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: off it goes Dang! I missed the mesh cover! That is unbelievable! __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

01-30-2015, 09:39 PM	#790
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes ^^lol, thanks guys...we've been test fitting the wiring so not many new pics, we did the cable driven wipers mounted (hopefully I will never need them but better to be safe then sorry) went cable driven so wiper motor could be hid in cowl area.. We did finish up the rear splash pans, just wanted something to hide compressors and tank but still let in air flow to cool the compressors yet quite them down a bit. Also have a drain for the water trap in the one splash pan and then a drain cock for the tank, both done so things can be drained without removing the splash pans Last edited by CHROMAHOLIC; 01-30-2015 at 09:49 PM.

01-30-2015, 10:09 PM	#791
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: off it goes amazing work!!!! any more info on that wiper and install like what brand etc im looking to relocate mine under the cowl too thanks

01-31-2015, 11:23 AM	#792
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: off it goes How is the mesh attached to the plate ?

02-02-2015, 05:37 PM	#793
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: off it goes wow!!! __________________ My Build Thead (Project Slow Motion)



Register or Log In To remove these advertisements.

02-02-2015, 06:04 PM	#794
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes the mesh has lip all around it so we pushed it up through from the bottom and then bonded it to the stainless surround

02-02-2015, 06:07 PM	#795
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: off it goes the work on this thing is insane! __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

02-07-2015, 08:38 PM	#796
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes Flush mount pop up fuel filler is in....

02-07-2015, 08:41 PM	#797
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: off it goes nice. where is that? ....in the bed ? __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

02-07-2015, 08:45 PM	#798
CHROMAHOLIC Registered User Join Date: May 2009 Location: Ontario, Canada Posts: 795	Re: off it goes Yes sir....bed floor, it will be painted to match the floor

02-07-2015, 10:54 PM	#799
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: off it goes That thing is so clean you might not be able to find it if you paint it to match. Strong work! __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

Register or Log In To remove these advertisements.