73+ booster on a 72 ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

el curioso · 10-31-2006, 09:45 AM

can a booster from a 73 be used on a 72 chevy C-10 or does it have to be from a 72??

Aarons72s · 10-31-2006, 03:31 PM

Yes they can, have herd about it and seen it a couple of times on the board. Here is a bump for you.
Aaron

qksilver · 10-31-2006, 06:44 PM

Been working on that swap between many other things. A few new holes need to be drilled in the mounting bracket, you will have to fab the rod between the pedal and booster, plus remember to drill a hole 1 1/4 down from the manual hole on the brake pedal for P/B. That way the leverage is correct.
No I don't have pictures but line stuff up and it is really obvious what needs to be done

zden · 10-31-2006, 07:11 PM

i swapped in a booster and aluminum master cylinder from an '82 into my '72. all i had to do was drill 2 top holes in the bracket. the rod fit just fine that came on the booster. the only thing i had to change was the plastic tube that seals to the firewall since i already had power brakes i used the tube from my old booster. got the booster and master cylinder at o'rielly's for about $100 bucks. hope this helps

Brad · 10-31-2006, 08:56 PM

Here's one for sale, lol. Ready to bolt on and go. I had this on my 67 and it works great with no problems!
http://67-72chevytrucks.com/vboard/s...d.php?t=214044

qksilver · 11-01-2006, 09:22 PM

You did what i had to do!

10-31-2006, 09:45 AM	#1
el curioso Registered User Join Date: Dec 2004 Location: El paso, Tx. Posts: 428	73+ booster on a 72 ?? can a booster from a 73 be used on a 72 chevy C-10 or does it have to be from a 72?? __________________ 1969 Chevy C-10 350/700r4

10-31-2006, 03:31 PM	#2
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: 73+ booster on a 72 ?? Yes they can, have herd about it and seen it a couple of times on the board. Here is a bump for you. Aaron

10-31-2006, 06:44 PM	#3
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 73+ booster on a 72 ?? Been working on that swap between many other things. A few new holes need to be drilled in the mounting bracket, you will have to fab the rod between the pedal and booster, plus remember to drill a hole 1 1/4 down from the manual hole on the brake pedal for P/B. That way the leverage is correct. No I don't have pictures but line stuff up and it is really obvious what needs to be done

10-31-2006, 07:11 PM	#4
zden Registered User Join Date: Apr 2006 Location: Montgomery, TX Posts: 72	Re: 73+ booster on a 72 ?? i swapped in a booster and aluminum master cylinder from an '82 into my '72. all i had to do was drill 2 top holes in the bracket. the rod fit just fine that came on the booster. the only thing i had to change was the plastic tube that seals to the firewall since i already had power brakes i used the tube from my old booster. got the booster and master cylinder at o'rielly's for about $100 bucks. hope this helps __________________ 1966 Chevrolet Suburban 1955 Chevrolet Bel Air

10-31-2006, 08:56 PM	#5
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: 73+ booster on a 72 ?? Here's one for sale, lol. Ready to bolt on and go. I had this on my 67 and it works great with no problems! http://67-72chevytrucks.com/vboard/s...d.php?t=214044 __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

11-01-2006, 09:22 PM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 73+ booster on a 72 ?? You did what i had to do!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.