69 gmc rear drop??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'69 Gmc · 02-21-2016, 11:16 PM

I have a 1969 swb gmc. Of course it is leaf rear. I'm on the fence about the flip kit or a drop shackle and removing the helper. I have 3 leafs and a helper. From what I've researched some had 5/1 springs and some 3/1 springs. Some (I'm assuming with the 5/1) said that they left 3 springs to get the drop. I'm asking if anyone knows if I had a 2" drop shackle amd remove the helper (I'd have just 3 leafs) how low it would sit. I know they say the flip is about 5" but is that with the 5leaf pack? I'd like to have around a 4" drop in the rear. Any help appriciated.
Posted via Mobile Device

Mike C · 02-22-2016, 09:17 AM

I have a 69 shot step Chevy with rear leafs. It has the HD 5 leaf springs. I flipped it with the DJM kit and it netted 7" drop. I pulled the overloads just because they hit the CalTrac bars.

If you want just 4" drop, suck it up and buy the drop springs. That leaves you the shackle option if you want to go a little further. When you flip you lower the thickness of the housing plus the height of the springs and then the mount. I had "guesstimated" at around 6" and netted a little more.

I'm very please with how my truck sits and rides. I did not notch but it will hit the shorty bump stops on really sharp hits.

**SoCoC10** · 02-22-2016, 10:19 AM

A 69 GMC I did with 3" spindles, 1" springs front and DJM flip kit rear.

'69 Gmc · 02-22-2016, 12:29 PM

Quote:

Originally Posted by SoCoC10

A 69 GMC I did with 3" spindles, 1" springs front and DJM flip kit rear.

SoCoC10 do you have the 3/1 spring pack? And did u notch? This will be a daily driver (at least a couple days a week)and just didn't want it too low. I do like the the stance of your truck though.
Posted via Mobile Device

**SoCoC10** · 02-22-2016, 12:59 PM

I can't recall the spring pack count but no I did not notch the frame. Just trimed the rear bump stops. The DJM Kit comes with really short bump stops. Tires are 225/70 front and 275/60 rear on 7" and 8" rims.

'69 Gmc · 02-22-2016, 02:04 PM

This old thread where the guy says he did the flip then went back with leaf on top and removed all but three is what has me wondering. He said it was 2" higher than the flip but rode smoother. So with me only having 3 and a helper if I removed the helper amd and got a 2" shackle seems like it would sit close to the hight of a flip???
Posted via Mobile Device

'69 Gmc · 02-22-2016, 02:06 PM

Quote:

Originally Posted by '69 Gmc

This old thread where the guy says he did the flip then went back with leaf on top and removed all but three is what has me wondering. He said it was 2" higher than the flip but rode smoother. So with me only having 3 and a helper if I removed the helper amd and got a 2" shackle seems like it would sit close to the hight of a flip???
Posted via Mobile Device

Posted via Mobile Device

'69 Gmc · 02-22-2016, 03:26 PM

And since I do have the 3/1 springs I don't what this to happen

http://67-72chevytrucks.com/vboard/s...d.php?t=572645
Posted via Mobile Device

70's luvr · 02-23-2016, 11:06 AM

3" drop spindles and one coil cut for 5" total drop.
rear is axle flip with 5/1 spring pack.

Hitting the frame on some bumps with bike in back. Might go to C-notch.

Mike C · 02-26-2016, 12:03 AM

Now that I am on my laptop and not a mobile device, here's a shot of mine.

02-21-2016, 11:16 PM	#1
'69 Gmc Registered User Join Date: Feb 2016 Location: Columbia TN Posts: 145	69 gmc rear drop??? I have a 1969 swb gmc. Of course it is leaf rear. I'm on the fence about the flip kit or a drop shackle and removing the helper. I have 3 leafs and a helper. From what I've researched some had 5/1 springs and some 3/1 springs. Some (I'm assuming with the 5/1) said that they left 3 springs to get the drop. I'm asking if anyone knows if I had a 2" drop shackle amd remove the helper (I'd have just 3 leafs) how low it would sit. I know they say the flip is about 5" but is that with the 5leaf pack? I'd like to have around a 4" drop in the rear. Any help appriciated. Posted via Mobile Device Attached Images

02-22-2016, 09:17 AM	#2
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,709	Re: 69 gmc rear drop??? I have a 69 shot step Chevy with rear leafs. It has the HD 5 leaf springs. I flipped it with the DJM kit and it netted 7" drop. I pulled the overloads just because they hit the CalTrac bars. If you want just 4" drop, suck it up and buy the drop springs. That leaves you the shackle option if you want to go a little further. When you flip you lower the thickness of the housing plus the height of the springs and then the mount. I had "guesstimated" at around 6" and netted a little more. I'm very please with how my truck sits and rides. I did not notch but it will hit the shorty bump stops on really sharp hits. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

02-22-2016, 10:19 AM	#3
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,142	Re: 69 gmc rear drop??? A 69 GMC I did with 3" spindles, 1" springs front and DJM flip kit rear. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count Last edited by SoCoC10; 02-22-2016 at 10:22 AM. Reason: Add Photo

02-22-2016, 12:59 PM	#5
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,142	Re: 69 gmc rear drop??? I can't recall the spring pack count but no I did not notch the frame. Just trimed the rear bump stops. The DJM Kit comes with really short bump stops. Tires are 225/70 front and 275/60 rear on 7" and 8" rims. __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

02-22-2016, 02:04 PM	#6
'69 Gmc Registered User Join Date: Feb 2016 Location: Columbia TN Posts: 145	Re: 69 gmc rear drop??? This old thread where the guy says he did the flip then went back with leaf on top and removed all but three is what has me wondering. He said it was 2" higher than the flip but rode smoother. So with me only having 3 and a helper if I removed the helper amd and got a 2" shackle seems like it would sit close to the hight of a flip??? Posted via Mobile Device

02-22-2016, 03:26 PM	#8
'69 Gmc Registered User Join Date: Feb 2016 Location: Columbia TN Posts: 145	Re: 69 gmc rear drop??? And since I do have the 3/1 springs I don't what this to happen http://67-72chevytrucks.com/vboard/s...d.php?t=572645 Posted via Mobile Device

02-23-2016, 11:06 AM	#9
70's luvr Registered User Join Date: Nov 2013 Location: Spring Hill,Fl Posts: 223	Re: 69 gmc rear drop??? 3" drop spindles and one coil cut for 5" total drop. rear is axle flip with 5/1 spring pack. Hitting the frame on some bumps with bike in back. Might go to C-notch. Last edited by 70's luvr; 02-23-2016 at 11:19 AM.

02-26-2016, 12:03 AM	#10
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,709	Re: 69 gmc rear drop??? Now that I am on my laptop and not a mobile device, here's a shot of mine. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.