IN WTB cowl screw u-nut - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70STOVEBOLT** · 01-18-2019, 06:53 PM

I need a nut like in the pic. I somehow misplaced one... It clips onto the cab under the cowl on the top and one of the 4 small screws threads into it.

*randy500* · 01-18-2019, 08:28 PM

I think the one in your picture is from the glovebox...I took some off the other day and they were not as long, almost square with tab on top covering only half of the screw hole.

68bbc/20 · 01-18-2019, 10:12 PM

napa, carquest, autozone, they all carry an assortment of screws and fastners, speed nuts, ect.
for almost any auto need like that.

**70STOVEBOLT** · 01-18-2019, 11:57 PM

Quote:

Originally Posted by randy500

I think the one in your picture is from the glovebox...I took some off the other day and they were not as long, almost square with tab on top covering only half of the screw hole.

Randy, my glovebox has the ones you describe. I had the ones in my pic with the screws for the cowl with the captive washer, but it is possible that they are not the correct ones for the cowl.

*randy500* · 01-19-2019, 01:26 AM

Post a pic of what you have on the glovebo now.

I believe the dash bezel has ones like I described for the cowl panel but The cowl panel takes a larger screw, #10 vs dash screws which I think are #8.

**70STOVEBOLT** · 01-19-2019, 10:19 AM

Here is what I took off when I removed the glovebox liber. It had been replaced at one time, it was kept original.

*randy500* · 01-19-2019, 01:38 PM

That’s what I took off he cowl the other day but like I said the dash bezel has something similar. I need to install a cowl tomorrow or so, I’m gonna remove one and see what it has for j clips and compare to the dash ones because the screw is larger I think. I will post up what I find.

**70STOVEBOLT** · 01-19-2019, 03:18 PM

Randy, thank you for sharing your knowledge.

**Madkidd007** · 01-19-2019, 05:55 PM

Quote:

Originally Posted by 68bbc/20

napa, carquest, autozone, they all carry an assortment of screws and fastners, speed nuts, ect.
for almost any auto need like that.

Also overlooked is the Lowe’s hardware section. A couple rows of automotive items. All kinds of body hardware

**Curtb1971** · 01-19-2019, 09:41 PM

I have some spares of the j-nut that secures the middle of the cowl in my stash. Shoot over your address and I'll send you a couple

**70STOVEBOLT** · 01-19-2019, 11:39 PM

Curtb1971 I sent you a PM.

*randy500* · 01-20-2019, 04:35 PM

Dash above, cowl below

**70STOVEBOLT** · 01-20-2019, 05:19 PM

Randy thank you for posting that. It looks like I need three of those and possibly all four screws then.

01-18-2019, 08:28 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB cowl screw u-nut I think the one in your picture is from the glovebox...I took some off the other day and they were not as long, almost square with tab on top covering only half of the screw hole.

01-18-2019, 10:12 PM	#3
68bbc/20 Registered User Join Date: Dec 2018 Location: greencastle indiana Posts: 105	Re: WTB cowl screw u-nut napa, carquest, autozone, they all carry an assortment of screws and fastners, speed nuts, ect. for almost any auto need like that.

01-19-2019, 01:26 AM	#5
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB cowl screw u-nut Post a pic of what you have on the glovebo now. I believe the dash bezel has ones like I described for the cowl panel but The cowl panel takes a larger screw, #10 vs dash screws which I think are #8.

01-19-2019, 10:19 AM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,212	Re: WTB cowl screw u-nut Here is what I took off when I removed the glovebox liber. It had been replaced at one time, it was kept original. Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-19-2019, 01:38 PM	#7
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB cowl screw u-nut That’s what I took off he cowl the other day but like I said the dash bezel has something similar. I need to install a cowl tomorrow or so, I’m gonna remove one and see what it has for j clips and compare to the dash ones because the screw is larger I think. I will post up what I find.

01-18-2019, 06:53 PM	#1
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,212	WTB cowl screw u-nut I need a nut like in the pic. I somehow misplaced one... It clips onto the cab under the cowl on the top and one of the 4 small screws threads into it. Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-19-2019, 03:18 PM	#8
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,212	Re: WTB cowl screw u-nut Randy, thank you for sharing your knowledge. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-19-2019, 09:41 PM	#10
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: WTB cowl screw u-nut I have some spares of the j-nut that secures the middle of the cowl in my stash. Shoot over your address and I'll send you a couple __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

01-19-2019, 11:39 PM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,212	Re: WTB cowl screw u-nut Curtb1971 I sent you a PM. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-20-2019, 04:35 PM	#12
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB cowl screw u-nut Dash above, cowl below Attached Images

01-20-2019, 05:19 PM	#13
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,212	Re: WTB cowl screw u-nut Randy thank you for posting that. It looks like I need three of those and possibly all four screws then. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.