The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-09-2018, 03:43 PM   #26
4x4k30
Registered User
 
4x4k30's Avatar
 
Join Date: Jun 2003
Location: ga
Posts: 458
Re: Does this seem like a good idea for a build?

I would keep looking I learned the hard way on many a piles of junk with rust that I have bought in the past . the rust is in every part of the truck it makes it hard to buy all new parts or good rustfree parts when you can keep looking and find a good truck to start with I bought my 77 crew cab out in ca. and had it shipped to ga. just because it wasn't eat up with rust it had just a little rust in the floorpans but they were easy to cut out and replace the bed had a couple spots so replaced it with a bed off a 87 with no rust for 300 bucs . what I am trying to say is if you are wanting a nice truck just keep looking and you will find one sooner or later ,
Attached Images
   
__________________
4x4k30 if trouble was money i would have plenty
4x4k30 is offline   Reply With Quote
Old 01-09-2018, 04:20 PM   #27
Tiger Joe
Registered User
 
Join Date: Mar 2015
Location: South of Pittsburgh
Posts: 311
Re: Does this seem like a good idea for a build?

Quote:
Originally Posted by jbailly View Post
I have yet to call on it or look at it in person, but it is literally 2 houses away, so I can walk down and talk it over all most any time. Also thanks for the info on the prices, so adjust engine trans budget to $7000 should cover me, I'll have to look up the Advance Adapters bell housing as to why exactly that is needed, but I'm thinking it has to do with the location of the slave cylinder for hydraulic clutch.
the reason you need the bellhousing is on the stock chevy nv4500 bellhousing, the clutch slave is on the pass side. on the square body 4x4s its pass side driveshaft, so there can be interference issues. I believe some guys (possibly lifted) have gotten away with using the stock setup.
Tiger Joe is offline   Reply With Quote
Old 01-09-2018, 04:21 PM   #28
jbailly
Senior Member
 
jbailly's Avatar
 
Join Date: Jun 2008
Location: Creekside, PA
Posts: 208
Re: Does this seem like a good idea for a build?

That's a sweet truck. Yeah I guess I need to expand to the West coast and down south as that seems to be where all the decent trucks are.
__________________
1967 Chevrolet Impala Sport Sedan Royal Plum Metallic (1967) My Dad ordered it. 33,xxx miles, parked since 1977.
jbailly is offline   Reply With Quote
Old 01-09-2018, 09:01 PM   #29
mongocanfly
Senior Member
 
Join Date: May 2015
Location: Alabama
Posts: 4,398
Re: Does this seem like a good idea for a build?

buy a rustfree truck and youll thank us later....buy a rusty truck and welllllll.....
__________________
Mongo...aka Greg

1981 c30 lq9 nv4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
1955.1 ls3 tr6060...(under construction)(on hold)
2013 gmc z71. (daily driver)
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
mongocanfly is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com