GA Trade a 60-61 GMC Hood for a 60-61 Chevy Hood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cwcarpenter98** · 02-21-2020, 08:40 PM

SOLD locally for $300

As the title says, I've got a 60-61 GMC hood that is in nice shape, but I want a 60-61 Chevy hood.

The hood is in Woodstock, GA

The hood is straight and only has a couple of rust issues that I noticed. The inner structure right above the latch has some rust. The outside, passenger rear corner has some bubbling. There's some surface rust on the front lip where the paint probably flaked off or something. The black stuff in the center is dirt. Should clean up well for a decent driver.

Overall, I would give this hood a 7/10. The mesh is really nice and it has the wiring for the turn signal lamps.

If I had a 60-61 GMC, this would be a hood that I would restore.

*Still open for trade, but also willing to sell. $400 obo*

Also open to trade for a decent long bed with or without tailgate or 61-63 1/2 ton nub style Chevy hubcaps

**cwcarpenter98** · 02-23-2020, 05:55 PM

I might be tempted to sell it outright, but mainly looking to trade at the moment.

**GMCNUT** · 02-27-2020, 01:44 PM

LMK if you end up pricing it outright. I am not near Woodstock but closer than most - NE Alabama

**cwcarpenter98** · 02-27-2020, 02:13 PM

Quote:

Originally Posted by GMCNUT

LMK if you end up pricing it outright. I am not near Woodstock but closer than most - NE Alabama

Will do. I'm still looking to trade at the moment

**cwcarpenter98** · 03-08-2020, 05:00 PM

I would also be interested in trading for a complete longbed without trim holes with or without a tailgate

**southern parts** · 03-10-2020, 05:08 PM

I have. 60 -61 hood that will need some work. Not really looking for a GMC hood but maybe we can work something out.

**cwcarpenter98** · 03-10-2020, 09:21 PM

Quote:

Originally Posted by southern parts

I have. 60 -61 hood that will need some work. Not really looking for a GMC hood but maybe we can work something out.

PM Sent

**cwcarpenter98** · 03-15-2020, 12:30 AM

Still open to trading, but this hood is also available for sale. I'm asking $400 obo

**cwcarpenter98** · 03-20-2020, 09:59 PM

Anyone need this hood? It's sitting under cover in my trailer, but sure would look better on a truck

**GMCNUT** · 03-25-2020, 12:15 PM

Quote:

Originally Posted by southern parts

I have. 60 -61 hood that will need some work. Not really looking for a GMC hood but maybe we can work something out.

Hey bud - what kind of cabbage does it take to buy the chrome grille off that truck with the Green hood on it? Need a short bed factory automatic crossmember from a 60-62 as well

**cwcarpenter98** · 03-27-2020, 11:56 PM

I'd like to see this hood get used, so make me an offer on it if you want it or could use it.
I know the virus can cause a problem, but I'm willing to work out a solution.

**GMCNUT** · 03-31-2020, 10:58 AM

Christian, remind me all the parts we could trade - I have a set of 69-72 solid front fenders (not sure you have any trucks that genre) but I don't have much in the way of sheetmetal or hoods for 60-66. Got some factory radios for 60-61, and ?. If we can come up with enough pieces to make it worth your while to bring that hood closer to me in Cedartown lets say, then I would make the run and swap whatever we can come up with

**cwcarpenter98** · 03-31-2020, 05:12 PM

Quote:

Originally Posted by GMCNUT

Christian, remind me all the parts we could trade - I have a set of 69-72 solid front fenders (not sure you have any trucks that genre) but I don't have much in the way of sheetmetal or hoods for 60-66. Got some factory radios for 60-61, and ?. If we can come up with enough pieces to make it worth your while to bring that hood closer to me in Cedartown lets say, then I would make the run and swap whatever we can come up with

I only have my 63 and my 95 Dakota. At this point in my build, there's not a whole lot that I need, but if it's something that works for both parties involved, I don't mind going on an adventure for some good parts.

Here's the list:

61-63 1/2 ton nub Chevy hubcaps
Complete long bed either fleet or step (if the long step sides are rough, but the rest of the stepside parts are decent, I'd still be interested), would also need painted stepside bumper and brackets if I switch to a step side bed
60-61 Chevy hood (I have a bowtie and the turn signal pods, so just need a bare hood)
62-66 GMC hood
Mig welder
6 lug 12 bolt posi 3.73 preferred, possibly 4.10s

If there's any other Dakota guys out there, I also want a few parts for my 95:
Factory bucket seats and console
All the stuff to swap from an auto to a manual
Lowering kit stuff

I'm also open to a cash offer, and I would be willing to deliver the hood if the price and location works out well

4/24/2020 Edit:
SOLD locally to a guy that has a 60 GMC 1/2 ton factory 4x4

02-21-2020, 08:40 PM	#1
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Trade a 60-61 GMC Hood for a 60-61 Chevy Hood SOLD locally for $300 As the title says, I've got a 60-61 GMC hood that is in nice shape, but I want a 60-61 Chevy hood. The hood is in Woodstock, GA The hood is straight and only has a couple of rust issues that I noticed. The inner structure right above the latch has some rust. The outside, passenger rear corner has some bubbling. There's some surface rust on the front lip where the paint probably flaked off or something. The black stuff in the center is dirt. Should clean up well for a decent driver. Overall, I would give this hood a 7/10. The mesh is really nice and it has the wiring for the turn signal lamps. If I had a 60-61 GMC, this would be a hood that I would restore. Still open for trade, but also willing to sell. $400 obo Also open to trade for a decent long bed with or without tailgate or 61-63 1/2 ton nub style Chevy hubcaps Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 04-24-2020 at 10:31 PM.

02-23-2020, 05:55 PM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Trade a 60-61 GMC Hood for a 60-61 Chevy Hood I might be tempted to sell it outright, but mainly looking to trade at the moment. __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

02-27-2020, 01:44 PM	#3
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: Trade a 60-61 GMC Hood for a 60-61 Chevy Hood LMK if you end up pricing it outright. I am not near Woodstock but closer than most - NE Alabama __________________ My Projects and Toys - All 100% Stock 1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction 1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar 1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock 1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd 1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet 1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight 1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB 1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet 1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet 1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.

03-08-2020, 05:00 PM	#5
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Trade a 60-61 GMC Hood for a 60-61 Chevy Hood I would also be interested in trading for a complete longbed without trim holes with or without a tailgate __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-10-2020, 05:08 PM	#6
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: Trade a 60-61 GMC Hood for a 60-61 Chevy Hood I have. 60 -61 hood that will need some work. Not really looking for a GMC hood but maybe we can work something out. Attached Images

03-15-2020, 12:30 AM	#8
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Trade a 60-61 GMC Hood for a 60-61 Chevy Hood Still open to trading, but this hood is also available for sale. I'm asking $400 obo Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-20-2020, 09:59 PM	#9
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Trade a 60-61 GMC Hood for a 60-61 Chevy Hood Anyone need this hood? It's sitting under cover in my trailer, but sure would look better on a truck __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-27-2020, 11:56 PM	#11
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Trade a 60-61 GMC Hood for a 60-61 Chevy Hood I'd like to see this hood get used, so make me an offer on it if you want it or could use it. I know the virus can cause a problem, but I'm willing to work out a solution. Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-31-2020, 10:58 AM	#12
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: Trade a 60-61 GMC Hood for a 60-61 Chevy Hood Christian, remind me all the parts we could trade - I have a set of 69-72 solid front fenders (not sure you have any trucks that genre) but I don't have much in the way of sheetmetal or hoods for 60-66. Got some factory radios for 60-61, and ?. If we can come up with enough pieces to make it worth your while to bring that hood closer to me in Cedartown lets say, then I would make the run and swap whatever we can come up with __________________ My Projects and Toys - All 100% Stock 1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction 1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar 1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock 1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd 1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet 1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight 1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB 1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet 1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet 1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.