AR wtb shifting rods from a 67-72 3 speed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

65truckowner · 08-22-2018, 07:38 AM

I am needing a set of shifting rods from a 67-72 c10 with the 3 speed on the column price shipped to 72560 Thanks

shoveldug · 08-22-2018, 08:11 AM

i will ship you a set for $50 total. They are from a 6 cyl truck saginaw transmission.

**southern parts** · 08-22-2018, 08:26 AM

6 cyl. or V8 ?

65truckowner · 08-22-2018, 08:58 AM

Quote:

Originally Posted by southern parts

6 cyl. or V8 ?

I have a 65 c10 with a 68 3speed in it with a 350 the rods I have won't fit someone said the 67-72 six engine trucks would work
Posted via Mobile Device

**southern parts** · 08-22-2018, 09:40 AM

The rods that shoveldug has should work for you.

65truckowner · 08-22-2018, 05:02 PM

Do you have paypal
Posted via Mobile Device

**special-K** · 08-22-2018, 10:57 PM

If nothing works out I have a bunch of the rods. But they are all mixed up and I'd need help sorting out what is what

shoveldug · 08-23-2018, 06:18 AM

Quote:

Originally Posted by 65truckowner

Do you have paypal
Posted via Mobile Device

Yes I do. It is dwl65101@yahoo.com I also sent you a PM

65truckowner · 08-23-2018, 07:31 AM

Ok money sent Thanks

65truckowner · 09-01-2018, 07:44 PM

Just a heads up the shifting rods from a 67-69 chevy truck will not fit a 65 with a 68 3 speed transmission

**special-K** · 09-01-2018, 08:33 PM

Those were 67-72 6cyl rods for 3spd, correct? And you are saying those will not work on a '65 with V8 and 3spd. So have you tried 60-66 V8 rods for 3spd? Is the engine mounted in the 6cyl position (dist. back into the firewall) or the V8 position?

65truckowner · 09-01-2018, 09:10 PM

They will not work on my truck. I have a 350 with a 68 3 speed. The truck is a 65. The rods are too short and will not clear the firewall and the clutch z bar. I was under the truck a while trying everything to make them work. I have not tried the 60-66 v8 rods. I think the engine is in the 6 position but not sure. The original bell housing was in the truck when I got it bolted to the factory cross member right behind the engine.

**southern parts** · 09-02-2018, 10:45 AM

Are the engine frame stands in the front or rear holes? How much room between the distributor and firewall?

65truckowner · 09-02-2018, 09:08 PM

The back holes but like I said the bell housing is bolted to the front cross member. It cannot move forward to my knowledge Any way I went today to buy a tranmission and driveshaft from a guy and ended up buying the whole truck so I will have everything I need to put the right 3 speed in it

08-22-2018, 07:38 AM	#1
65truckowner Registered User Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,299	wtb shifting rods from a 67-72 3 speed I am needing a set of shifting rods from a 67-72 c10 with the 3 speed on the column price shipped to 72560 Thanks __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

08-22-2018, 08:11 AM	#2
shoveldug Registered User Join Date: Mar 2014 Location: Volant, Pennsylvania Posts: 351	Re: wtb shifting rods from a 67-72 3 speed i will ship you a set for $50 total. They are from a 6 cyl truck saginaw transmission. Last edited by shoveldug; 08-22-2018 at 08:35 AM.

08-22-2018, 08:26 AM	#3
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: wtb shifting rods from a 67-72 3 speed 6 cyl. or V8 ?

08-22-2018, 09:40 AM	#5
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: wtb shifting rods from a 67-72 3 speed The rods that shoveldug has should work for you.

08-22-2018, 05:02 PM	#6
65truckowner Registered User Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,299	Re: wtb shifting rods from a 67-72 3 speed Do you have paypal Posted via Mobile Device

08-22-2018, 10:57 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: wtb shifting rods from a 67-72 3 speed If nothing works out I have a bunch of the rods. But they are all mixed up and I'd need help sorting out what is what __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-23-2018, 07:31 AM	#9
65truckowner Registered User Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,299	Re: wtb shifting rods from a 67-72 3 speed Ok money sent Thanks __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

09-01-2018, 07:44 PM	#10
65truckowner Registered User Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,299	Re: wtb shifting rods from a 67-72 3 speed Just a heads up the shifting rods from a 67-69 chevy truck will not fit a 65 with a 68 3 speed transmission __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

09-01-2018, 08:33 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: wtb shifting rods from a 67-72 3 speed Those were 67-72 6cyl rods for 3spd, correct? And you are saying those will not work on a '65 with V8 and 3spd. So have you tried 60-66 V8 rods for 3spd? Is the engine mounted in the 6cyl position (dist. back into the firewall) or the V8 position? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-01-2018, 09:10 PM	#12
65truckowner Registered User Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,299	Re: wtb shifting rods from a 67-72 3 speed They will not work on my truck. I have a 350 with a 68 3 speed. The truck is a 65. The rods are too short and will not clear the firewall and the clutch z bar. I was under the truck a while trying everything to make them work. I have not tried the 60-66 v8 rods. I think the engine is in the 6 position but not sure. The original bell housing was in the truck when I got it bolted to the factory cross member right behind the engine. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

09-02-2018, 10:45 AM	#13
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: wtb shifting rods from a 67-72 3 speed Are the engine frame stands in the front or rear holes? How much room between the distributor and firewall?

09-02-2018, 09:08 PM	#14
65truckowner Registered User Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,299	Re: wtb shifting rods from a 67-72 3 speed The back holes but like I said the bell housing is bolted to the front cross member. It cannot move forward to my knowledge Any way I went today to buy a tranmission and driveshaft from a guy and ended up buying the whole truck so I will have everything I need to put the right 3 speed in it __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.