67 cheby's Dropmember build thread (CLOUD 9) - Page 105 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bmfpeterson · 11-28-2011, 02:04 PM

I remember my first gas welder what a difference right!

that hood/cover is soooooooooooo cool! and the tailgate deal is clean too!

**67cheby** · 11-28-2011, 02:15 PM

fo sho !! and thanks

jasonhall · 11-28-2011, 02:22 PM

Cool notch cover, never seen it done like that.. Its going to be sweet

thor · 11-28-2011, 02:25 PM

notch cover with valve cover script is awesome!!!

watahyahknow · 11-28-2011, 10:26 PM

since you put a wood floor in it .... how about using a router and carve some flames or tribal stuff or chevy bowtie intoo it

**67cheby** · 11-28-2011, 10:34 PM

thanks for all the compliments guys !! as far as the wood goes, if it was a more radical custom i would probably do something like that but with the look i am going for it will be more subtle

BMERDOC · 11-28-2011, 11:05 PM

67cheby, Don't be suprised if you see that script grafted into many a hood from now on. Nice touch!! I love that you used the hood to do the notch cover, continuing the body line into the bed! Inspirational to say the least!

**67cheby** · 11-28-2011, 11:32 PM

thanks man !!

BMERDOC · 11-28-2011, 11:51 PM

I can't tell you how welcome you are! The only other mod I've seen that was equal was when one of the guys (wish I could remember who) cut up a hood to make a cowl induction hood. Its hard to start a new trend but I just witnessed something new! Seeing that says to me that there is many places that the script could be grafted into. I wont give up my ideas...I'll let the others think for themselves. Just know when you see it where it came from!

jtp67-72 · 11-28-2011, 11:58 PM

I'm thinkin-valve cover script welded in tailgate....hhhmmmmm.....I AM building a truck.........lol.........just sayin...........jim

VA72C10 · 11-29-2011, 12:27 AM

Quote:

Originally Posted by BMERDOC

I can't tell you how welcome you are! The only other mod I've seen that was equal was when one of the guys (wish I could remember who) cut up a hood to make a cowl induction hood. Its hard to start a new trend but I just witnessed something new! Seeing that says to me that there is many places that the script could be grafted into. I wont give up my ideas...I'll let the others think for themselves. Just know when you see it where it came from!

Well, I already put it in the center of the dash where the radio speaker grille goes and also had that panel made with it enlarged to use on the rear tailgate...I had posted on another thread about possibly incorporating it into the radio area of the dash if smoothed and had considered it in a glovebox door as well...(one of the three dash areas...not all three of course)

Sorry that came off rude sounding....Guess that's what I get for trying to show off ideas

BMERDOC · 11-29-2011, 12:35 AM

Sorry VA72C10, I forgot about those mods! Very cool by the way

. I can see it grafted into the door just below the wings, in the fender, up top, just ahead of the doors, lower door just behind the fender, on a 67-68 hood on the drivers side, lower right on smooth tailgate...let me shut up. The potential is limitless.

BMERDOC · 11-29-2011, 12:39 AM

Not tryin to run off with it but it is a great idea! You just boosted the value of v/c's for guys who have seen this!

VA72C10 · 11-29-2011, 12:53 AM

Sorry for cluttering the thread Cheby....just thinking of all those ideas I have that I can't do right now because of $$$ or lack thereof....

And putting them out there again so if someone beats me to them at least I can claim firsts

watahyahknow · 11-29-2011, 06:48 AM

like i said i wouldnt be suprised if they make new forges for the script in a lager format to be put on the tailgate

**67cheby** · 11-29-2011, 10:43 AM

there is lot's of great ideas to be shared on this board !!

XxCHEVYMANxX · 11-29-2011, 06:20 PM

Nice! still can't wait to see it with color.... speaking of color did you decide or still kicking around ideas?

**67cheby** · 11-29-2011, 06:33 PM

think i have landed on the blue

Dinos63 · 11-29-2011, 06:45 PM

looks killer!!!!

bmfpeterson · 11-29-2011, 07:42 PM

Quote:

Originally Posted by 67cheby

think i have landed on the blue

Thats what Im talking about! We all know its going to be nice either way!

**67cheby** · 11-29-2011, 07:49 PM

thanks guys, just want it to be "different" hopefully the color of the truck and what i am doing on the interior along with all of the other little touches will set my truck apart from the crowd...we will see, if you could peek inside my head you could see it now !! LOL

watahyahknow · 11-29-2011, 08:09 PM

whell with all thye chevrolet sighns on the truck they whont misstake it for a f@rd once it is bleu

longbed67 · 11-29-2011, 09:28 PM

Loving the look of the tailgate! It will give her a great looking behind!

my4by2 · 11-29-2011, 09:31 PM

Killer touches man!!! Love the addition of those two items!

**67cheby** · 11-29-2011, 09:34 PM

Quote:

Originally Posted by longbed67

Loving the look of the tailgate! It will give her a great looking behind!

ya....she doesnt even look 44 from back here !! LOL

11-28-2011, 02:04 PM	#2601
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: 67 cheby's Dropmember build thread I remember my first gas welder what a difference right! that hood/cover is soooooooooooo cool! and the tailgate deal is clean too!

11-28-2011, 02:15 PM	#2602
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread fo sho !! and thanks __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-28-2011, 02:22 PM	#2603
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: 67 cheby's Dropmember build thread Cool notch cover, never seen it done like that.. Its going to be sweet

11-28-2011, 02:25 PM	#2604
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: 67 cheby's Dropmember build thread notch cover with valve cover script is awesome!!! __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

11-28-2011, 10:26 PM	#2605
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread since you put a wood floor in it .... how about using a router and carve some flames or tribal stuff or chevy bowtie intoo it __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-28-2011, 10:34 PM	#2606
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread thanks for all the compliments guys !! as far as the wood goes, if it was a more radical custom i would probably do something like that but with the look i am going for it will be more subtle __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-28-2011, 11:05 PM	#2607
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,935	Re: 67 cheby's Dropmember build thread 67cheby, Don't be suprised if you see that script grafted into many a hood from now on. Nice touch!! I love that you used the hood to do the notch cover, continuing the body line into the bed! Inspirational to say the least! __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

11-28-2011, 11:32 PM	#2608
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread thanks man !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-28-2011, 11:51 PM	#2609
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,935	Re: 67 cheby's Dropmember build thread I can't tell you how welcome you are! The only other mod I've seen that was equal was when one of the guys (wish I could remember who) cut up a hood to make a cowl induction hood. Its hard to start a new trend but I just witnessed something new! Seeing that says to me that there is many places that the script could be grafted into. I wont give up my ideas...I'll let the others think for themselves. Just know when you see it where it came from! __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever! Last edited by BMERDOC; 11-28-2011 at 11:57 PM.

11-28-2011, 11:58 PM	#2610
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: 67 cheby's Dropmember build thread I'm thinkin-valve cover script welded in tailgate....hhhmmmmm.....I AM building a truck.........lol.........just sayin...........jim __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

11-29-2011, 12:35 AM	#2612
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,935	Re: 67 cheby's Dropmember build thread Sorry VA72C10, I forgot about those mods! Very cool by the way . I can see it grafted into the door just below the wings, in the fender, up top, just ahead of the doors, lower door just behind the fender, on a 67-68 hood on the drivers side, lower right on smooth tailgate...let me shut up. The potential is limitless. __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

11-29-2011, 12:39 AM	#2613
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,935	Re: 67 cheby's Dropmember build thread Not tryin to run off with it but it is a great idea! You just boosted the value of v/c's for guys who have seen this! __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

11-29-2011, 12:53 AM	#2614
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 67 cheby's Dropmember build thread Sorry for cluttering the thread Cheby....just thinking of all those ideas I have that I can't do right now because of $$$ or lack thereof.... And putting them out there again so if someone beats me to them at least I can claim firsts __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-29-2011, 06:48 AM	#2615
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread like i said i wouldnt be suprised if they make new forges for the script in a lager format to be put on the tailgate __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-29-2011, 10:43 AM	#2616
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread there is lot's of great ideas to be shared on this board !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

11-29-2011, 06:20 PM	#2617
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 67 cheby's Dropmember build thread Nice! still can't wait to see it with color.... speaking of color did you decide or still kicking around ideas? __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

11-29-2011, 06:33 PM	#2618
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread think i have landed on the blue __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-29-2011, 06:45 PM	#2619
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 67 cheby's Dropmember build thread looks killer!!!! __________________ CHEVY ONLY... Nothin Else !

11-29-2011, 07:49 PM	#2621
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread thanks guys, just want it to be "different" hopefully the color of the truck and what i am doing on the interior along with all of the other little touches will set my truck apart from the crowd...we will see, if you could peek inside my head you could see it now !! LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-29-2011, 08:09 PM	#2622
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread whell with all thye chevrolet sighns on the truck they whont misstake it for a f@rd once it is bleu __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-29-2011, 09:28 PM	#2623
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: 67 cheby's Dropmember build thread Loving the look of the tailgate! It will give her a great looking behind! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

11-29-2011, 09:31 PM	#2624
my4by2 Registered User Join Date: Dec 2010 Location: Hot Springs, AR. Posts: 1,215	Re: 67 cheby's Dropmember build thread Killer touches man!!! Love the addition of those two items! __________________ 1977 Chevrolet K30 LWB Crew Cab 497HP Mast Motorsports 6.0L LY6 HO engine GM NV4500 5-speed, Centerforce clutch + NP205 D60 + 14-bolt FF w/ Eaton posi + disc brakes Skyjacker 2.5" full spring lift w/ Nitro shocks Custom paint + interior http://67-72chevytrucks.com/vboard/s...d.php?t=435722

Register or Log In To remove these advertisements.