11-09-2004, 06:55 PM | #1 |
Registered User
Join Date: Jun 2004
Location: Rockville Va.
Posts: 260
|
Where are the 1 tons?
Yes i said 1 tons! i know that some of us out here have 1 tons. i have seen them in the avatars. i want to see them now as a real pic! i like the dual wheel kind, but show them all fixed or not. got my eye on 1 myself thanks!
__________________
1972 GMC Sierra Grande |
11-09-2004, 08:48 PM | #2 |
Registered User
Join Date: Jun 2004
Location: Rockville Va.
Posts: 260
|
hey moonlight thanks! and welcome from VA. your 74 looks like it was in a magazine! nice....i used to have a 74 cheyenne super but my wife flipped it.
__________________
1972 GMC Sierra Grande |
11-09-2004, 08:51 PM | #3 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
Rear end and shot from the side I bought it to put the cab on my 70 GMC, but who knows....
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
11-09-2004, 08:56 PM | #4 |
Registered User
Join Date: Jun 2004
Location: Rockville Va.
Posts: 260
|
man that thing is a beast! jim this is what i am talking about! i would like to have a nice ride truck, and a work horse. something i don't mind giving a job to and putting the hammer to it. that truck can take it and keep on going. like a good tractor!
__________________
1972 GMC Sierra Grande |
11-09-2004, 09:03 PM | #5 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
It is sitting there w/ a 427 in it, does not come with the truck though, had a 350 w/ a SM465 tranny. The guy told me it was a wrecker used at a local gas station until 1993. Yukon Jack has a buddy with a 1ton converted to 4wd, it's nice w/ a flat bed.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
11-09-2004, 09:06 PM | #6 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
Here it is: (that's YJ 69 K20 on the trailer)
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
11-09-2004, 09:13 PM | #7 |
Registered User
Join Date: Jun 2004
Location: Rockville Va.
Posts: 260
|
now that is a picture! a beast w/ another beast as a lookout! priceless....
__________________
1972 GMC Sierra Grande |
11-10-2004, 07:37 PM | #8 |
Registered User
Join Date: Jun 2004
Location: Rockville Va.
Posts: 260
|
i giving this a bump....i know there are more out there so let's see them! restored or not.
__________________
1972 GMC Sierra Grande |
11-10-2004, 11:57 PM | #9 |
TOTY 2006
Join Date: Dec 1999
Location: Magalia CA USA
Posts: 2,270
|
67 one ton wrecker
|
11-10-2004, 11:58 PM | #10 |
Born To Lose Club
Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,308
|
I few I have on my comp...
__________________
Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
11-11-2004, 09:05 AM | #11 |
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Just started on mine last week. Watch for updates regularly....
I've got a fabrication/erection business (no comments from the perverts, look it up, sickos) so I'm building it to use rather than the red diesel I use now. I need a big flatbed with racks and goosneck hitch. This truck will fill the bill. I've already fixed/ changed the damaged grille, and used the torch to remove about 300 pounds of "character" off of the bed and underside.
__________________
I'm on the Instagram- @Gearhead_Kevin |
11-11-2004, 05:23 PM | #12 |
Registered User
Join Date: Jun 2004
Location: Rockville Va.
Posts: 260
|
these are great! love them...keep them coming. i would like this to be the 1 thread that contain all the 1 tons we can find for future viewing. thanks. tx firefighter keep us posted!
__________________
1972 GMC Sierra Grande |
11-12-2004, 08:42 PM | #13 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
How about a vintage pic?
|
11-12-2004, 09:06 PM | #14 | |
Registered User
Join Date: Feb 2003
Location: The Rubber City
Posts: 5,498
|
Quote:
James, I want that truck...it is awesome. Sorry, I just had to say it. /hijack
__________________
1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650 |
|
11-12-2004, 11:58 PM | #15 |
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,906
|
i will bite... again.. not a 67-72...
__________________
Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call |
11-17-2004, 07:07 PM | #16 |
Registered User
Join Date: Jun 2004
Location: Rockville Va.
Posts: 260
|
i am sure that there are more takers for this pic set. please look for some more of your trucks or ones that you have. these are all great! thanks guys
__________________
1972 GMC Sierra Grande |
11-18-2004, 08:02 AM | #17 |
Registered User
Join Date: Nov 2003
Location: northeast alabama
Posts: 256
|
here's my 98
|
11-19-2004, 04:45 PM | #18 |
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
Some more pics of my buddy's 70 C30 converted to K30 (using a Dana 44 front axle)
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 11-19-2004 at 04:52 PM. |
11-19-2004, 09:31 PM | #19 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
YJ what size tires does your buddy have?
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
11-20-2004, 04:23 PM | #20 |
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
I think they are 235 85 16's.
Had to keep them pretty narrow for the rear axle.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 11-20-2004 at 04:25 PM. |
11-20-2004, 08:23 PM | #21 |
Project 2 Resume
Join Date: May 2004
Location: Jim Thorpe, PA
Posts: 884
|
My Multi-Colored POS CC Dually...
Bought it around 1997 only to be used as a tow vehicle. Previous owner was the West Virginia dept. of Transportation. Was in a bad hail storm prior to me buying it. Didn't run, no brakes, bad clutch, bald tires, all glass was burned up from welding or torching too close. Interior was shot and masking tape under bondo rockers & floor sections. Busted up grill & bezels. Bed lights didn't work. Had good body mounts, pintle hitch, frame and brand new 2" dual exhaust . It had 42k original miles, before I rebuilt the motor last year. Basically sat from 4/99 to 9/02 after I had surgeries on shoulder and back, after an accident. Only driven then from 9/02-11/02. I've done too many things to list, but it's been off the road the past 2 years. Will probably put back on in a couple of weeks. Body work and interior to be done after it warms up. Have the original picture, for sale ad someplace. The "new" bed and tailgate are the ones I bought here off of gn4u2c. Since the pics, the rear bumper & hitch sit properly after I altered the brackets. Wiring & lights are all done. Headers & new 2.5" exhaust exiting at rear tires. Installed a 2" suspension in the rear.
__________________
John 1984 C30 Chevy Crew Cab Dually 1998 Jeep Cherokee 4x4 2004 Chevy Trailblazer 4x4 (wife's) 1970 Mustang FB fully tubed (getting 521 BBF & powerglide) 1978 Nova 2dr (going BBCaddy & S.P. th400) 1984 Monte SS (circle track car) Last edited by badone07; 07-14-2005 at 06:51 PM. |
11-21-2004, 04:07 AM | #22 |
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
I think it looks pretty good without the rear fendersides
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
11-21-2004, 06:27 AM | #23 |
Senior Member
Join Date: Mar 2003
Posts: 2,500
|
I agree...........it does look good without them!
That's all I don't like about duallys.....EXPENSIVE and often damaged fenders. |
11-21-2004, 07:27 PM | #24 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
|
I have a picture,if someone can post it.for me.I can e-mail it,but not post it.I`m new to such technology.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
11-21-2004, 07:51 PM | #25 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
email them to me; jimandtamara@yahoo.com
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
Bookmarks |
|
|