Pic Test - The 1947 - Present Chevrolet & GMC Truck Message Board Network

photoglg · 06-03-2002, 08:26 PM

Test pic of my truck

Mountain Man · 06-03-2002, 08:56 PM

Love the seat! That bench looks alot like my 67. Where did you get the original cover for it, and would it fit the 67 bench. I have a folding bench, and it looks like yours does too.

Longhorn Man · 06-03-2002, 09:03 PM

Won't work with the folder. If you look down at the hinged area, his covers it, yours has to be seperate.

Super Chevy · 06-03-2002, 09:07 PM

Thats what i call clean

nice truck

photoglg · 06-04-2002, 03:30 PM

I got the seat cover from Brothers, Its for a 71-72 But worked just fine in my 69. The seat does not fold. I just got the inside done last week.
Here is a different shot.

VNMOUS · 06-04-2002, 03:44 PM

COOL RIDE!!! I NEED SOME DOOR PANELS FOR MY RIDE!!!!

devinfife · 06-04-2002, 05:02 PM

very nice and clean. i like the flat black paint on the dash bezel and glove box door. btw, how much are those seat covers?

barn9 · 06-04-2002, 05:54 PM

Nice and clean, good job! I'm gonna put a pic of mine in to show we think alike. What kind of steering wheel do you have?

RALLY FAST · 06-04-2002, 07:15 PM

i like it heres mine

VNMOUS · 06-05-2002, 11:30 AM

My interior, I think I need some door panels.

VNMOUS · 06-05-2002, 11:33 AM

Try again

photoglg · 06-05-2002, 02:25 PM

The seat covers were about $ 270.00 and the wheel is a grant

Cheyenne Super · 06-05-2002, 07:38 PM

the interior looks nice

Stepside · 06-05-2002, 08:12 PM

That is sweeet photoglg.

JoetheMobster · 06-05-2002, 08:44 PM

Since we're putting pics of interiors in this post, here's mine!

BTW, the few pics that are here, put mine to shame!! haha

DevinM · 06-06-2002, 07:36 PM

Love those Door panels. Where did you get them? Also, whats below them, another small door panel?

photoglg · 06-06-2002, 09:22 PM

I had the metel panels covered and bought the lower ones from LMC to cover the old specker holes

06-03-2002, 08:26 PM	#1
photoglg Registered User Join Date: Jul 2001 Location: Oxnard, CA Posts: 143	Pic Test Test pic of my truck Attached Images __________________ 1969 GMC S/B S/S 3" drop

06-03-2002, 08:56 PM	#2
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	Love the seat! That bench looks alot like my 67. Where did you get the original cover for it, and would it fit the 67 bench. I have a folding bench, and it looks like yours does too. __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.

06-04-2002, 03:30 PM	#5
photoglg Registered User Join Date: Jul 2001 Location: Oxnard, CA Posts: 143	Bench Seat I got the seat cover from Brothers, Its for a 71-72 But worked just fine in my 69. The seat does not fold. I just got the inside done last week. Here is a different shot. Attached Images __________________ 1969 GMC S/B S/S 3" drop

06-04-2002, 03:44 PM	#6
VNMOUS Step Side's Rule Join Date: Feb 2002 Location: LEIGHTON,AL USA Posts: 227	COOL RIDE!!! I NEED SOME DOOR PANELS FOR MY RIDE!!!! __________________ DANO 07 Silverado Classic 67shortstep 76 stingray 95 cobra 66 Mustang Coupe 289

06-04-2002, 05:02 PM	#7
devinfife Registered User Join Date: Jan 2002 Location: Renton, WA Posts: 171	very nice and clean. i like the flat black paint on the dash bezel and glove box door. btw, how much are those seat covers? __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB 69 c-10. turquoise. 350 motor with 400 trans. long fleet. headers and dual flowmaster exhaust. K & N air cleaner, aluminum wheels and radials, stereo system and a bed liner. Manual drums and manual steering. Kickin it in Seattle, WA p.s. i love my longbed. must be a phallic thing.

06-03-2002, 09:03 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Won't work with the folder. If you look down at the hinged area, his covers it, yours has to be seperate.

06-03-2002, 09:07 PM	#4
Super Chevy Registered User Join Date: Feb 2001 Location: Ohio Posts: 1,025	Thats what i call clean nice truck

06-04-2002, 05:54 PM	#8
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Nice and clean, good job! I'm gonna put a pic of mine in to show we think alike. What kind of steering wheel do you have? Attached Images __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

06-04-2002, 07:15 PM	#9
RALLY FAST Registered User Join Date: Apr 2002 Location: knox, Tenn. Posts: 150	simple,clean& sharp i like it heres mine Attached Images __________________ 69 SHORT FLEET SIDE MAROON RESTORED. 71 LONG FLEET RESTORED D/DRIVER. BUT ALWAYS LOOKING TO IMPROVE 68 SHORT UNDER CONSTRUCTION

06-05-2002, 11:30 AM	#10
VNMOUS Step Side's Rule Join Date: Feb 2002 Location: LEIGHTON,AL USA Posts: 227	My interior, I think I need some door panels. __________________ DANO 07 Silverado Classic 67shortstep 76 stingray 95 cobra 66 Mustang Coupe 289

06-05-2002, 11:33 AM	#11
VNMOUS Step Side's Rule Join Date: Feb 2002 Location: LEIGHTON,AL USA Posts: 227	Try again Attached Images __________________ DANO 07 Silverado Classic 67shortstep 76 stingray 95 cobra 66 Mustang Coupe 289

06-05-2002, 02:25 PM	#12
photoglg Registered User Join Date: Jul 2001 Location: Oxnard, CA Posts: 143	The seat covers were about $ 270.00 and the wheel is a grant __________________ 1969 GMC S/B S/S 3" drop

06-05-2002, 07:38 PM	#13
Cheyenne Super Registered User Join Date: Mar 2002 Location: Efland, NC Posts: 303	lets see the rest of the truck the interior looks nice __________________ 1971 Cheyenne Super Soon to be converted to '68 front clip. Efland, NC

06-05-2002, 08:12 PM	#14
Stepside Gasser Join Date: May 2000 Location: Thomasville,NC USA Posts: 456	That is sweeet photoglg. __________________ :thud 70 sstep tubbed, Muncie, double hump, snowflake,

06-05-2002, 08:44 PM	#15
JoetheMobster Listening since '86 Join Date: Sep 2001 Location: Canada Posts: 1,799	Since we're putting pics of interiors in this post, here's mine! BTW, the few pics that are here, put mine to shame!! haha Attached Images __________________ 2007 Saturn Aura - hey it WAS a GM product



Register or Log In To remove these advertisements.

06-06-2002, 07:36 PM	#16
DevinM Registered User Join Date: Jan 2002 Location: Deerfield, MA USA Posts: 198	Love those Door panels. Where did you get them? Also, whats below them, another small door panel? __________________ '71 Chevy C-10 - Current '62 Imapla SS - Traded for my current '73 Nova Hatch - traded for ATC-350X '73 Chevelle Deluxe - First car (R.I.P) DEERFIELD, MA

06-06-2002, 09:22 PM	#17
photoglg Registered User Join Date: Jul 2001 Location: Oxnard, CA Posts: 143	I had the metel panels covered and bought the lower ones from LMC to cover the old specker holes __________________ 1969 GMC S/B S/S 3" drop

Register or Log In To remove these advertisements.