The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-15-2019, 05:11 PM   #1
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Family Truck Build

Ended up with a 65 C10 a few months ago and figured I needed to get on here and document/do plenty of research....

History (that I know anyways) is that my wife's uncle picked up 3 of them in the last 5-6 years. One was a nice driver, One was a little rougher but drivable, and the other one was occasionally drivable. It was ugly and had a later model 350/350 swapped in. Rust wasn't bad but it needs some things. He just didn't have the drive to work on all 3 anymore so I ended up with the rowdy one.

I've got two sons 2/7 that love to work on anything with me so I figured this would be a good project for us together.

It did not run the day I picked it up from him and he said it quit going into gear a few weeks ago. I've since gotten it started (just a loose connection) and was starting it every few weeks while it's stored at our family ranch until the weather cools off some. Last time down it didn't want to fire so I'll need to figure that out. The trans was bone dry when I checked it. I added a quart of trans fluid (when it was still running) and it lurched like it wanted to move so I need to dig into that as well. Looks like it's been leaking a ton of trans fluid at the dipstick base. It's been sitting in our barn most of the summer while we've been enjoying last winters project. (Air Nautique Boat w/ a 502)


From what I know he did:
Brakes are All New- Drums, Shoes, Lines, M/C, all of it.
Otherwise I don't think he really dug into this one mechanically

Cosmetically it's got new front fenders and a new tailgate on it. Bed floor is 1/4 plywood currently.

Sadly I've been so busy with non-fun actual work stuff I haven't done a thing to it so I'm excited to pull it back to the house next month and get working on it.

He also gave me some parts new in the box and some additional used spares:
-NIB Headliner
-Refurbed Gauge Cluster
-Factory Seat with great springs and frame. The cloth is terrible. The seat in it currently has a super nice cover but a bunch of broken springs on the driver side. I will probably just combine the two.
-New Interior Door Panels: Somebody hacked up the originals for speakers
-Original Steering Column. It has a later model one in it I believe.
- Original Wheels and Hubcaps- I'm not a purist so these will be going in storage just in case. I've got a set of six lug TT wheels that I will put on it.
-I've got boxes and boxes of nults and bolts he bought for various body panels.
A few other things I inventory whats there when I get it back to town.


Short term:
-Get it running consistently. Hoping some tuning and fresh fluids will get it moving.
-Re-bleed the brakes.
-Slap the wheel I've got on with some fresh tires.
-Clean up the wiring under the dash. It's a horrible mess.
-Do something with the bed. The plywood drives me nuts.

We should be moving within the next 1-1.5 years and goal number #1 is a bigger driveway/garage and/or shop at the house. We've got vehicles everywhere and it would be nice to have them all at home. After I have a good place to work we'll try to get serious on this thing.

Long term - Fun driver/Cruising Truck:
-Fix the rockers and any other rust.
-Paint... Still wayy early to know my direction there.
-LS and trans... Not 100% if I want to go auto or shift gears. I'd like my wife to enjoy the truck as well so this might end up being her decision. I'd like it either way.
-Re wire completely. I'd like to think I'm a wiring snob
-Nice Wood Bed
-Disc Brakes and Suspension Update. I don't think I want bags but will have to decide between simple and all new everything+ coil overs and swaybars. Of course budget will play a factor too.

I've had rock crawlers and big 4x4s but this is going to be my first street cruiser. Should be fun.
Attached Images
 
Treybizttu is offline   Reply With Quote
Old 08-15-2019, 05:14 PM   #2
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Re: Family Truck Build

Few More
Attached Images
    
Treybizttu is offline   Reply With Quote
Old 08-15-2019, 11:46 PM   #3
bsarts
Registered User
 
bsarts's Avatar
 
Join Date: Jul 2019
Location: Idaho Falls, Id.
Posts: 172
Re: Family Truck Build

Looks like you've got fun project for the kids and a nice place to start.
bsarts is offline   Reply With Quote
Old 08-16-2019, 03:14 PM   #4
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Re: Family Truck Build

Thanks I never really looked for a C10 of this vintage but always liked his. I've been in love with it since the day he asked If I wanted it...

Looking into suspension right now. I think I'm going to do a 2/4 from early classic for the time being. I haven't really searched yet but I'm curious if I will need a c-notch with 4" in the rear.
Treybizttu is offline   Reply With Quote
Old 08-16-2019, 03:33 PM   #5
okndn
Registered User
 
Join Date: Mar 2014
Location: Skiatook, OK
Posts: 33
Re: Family Truck Build

This is a good project
okndn is offline   Reply With Quote
Old 08-17-2019, 07:17 PM   #6
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,539
Re: Family Truck Build

Welcome neighbor! I work in NRH!

Looks like a great project!
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 08-19-2019, 03:20 PM   #7
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Re: Family Truck Build

Quote:
Originally Posted by Clyde65 View Post
Welcome neighbor! I work in NRH!

Looks like a great project!
Very cool.

Just finished reading through your build thread.
Treybizttu is offline   Reply With Quote
Old 08-20-2019, 07:58 PM   #8
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,539
Re: Family Truck Build

Think about coming to the C10’s in the park next month, probably 1000 trucks!
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 08-21-2019, 11:03 AM   #9
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Re: Family Truck Build

Quote:
Originally Posted by Clyde65 View Post
Think about coming to the C10’s in the park next month, probably 1000 trucks!
Hopefully we are in town that weekend and we will.
Treybizttu is offline   Reply With Quote
Old 08-24-2019, 10:00 AM   #10
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,539
Re: Family Truck Build

Look me up, I’ll be there with my truck and my dads 64 crew cab!
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 08-26-2019, 11:02 AM   #11
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Re: Family Truck Build

We will certainly try to find you!
Treybizttu is offline   Reply With Quote
Old 11-04-2019, 02:46 PM   #12
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Re: Family Truck Build

Finally drug this thing back from the ranch yesterday to get started.

And randomly picked up a 99 extended cab 4x4 with a 5.3 to steal the motor from for this one friday morning. Motor has a bunch of miles but it runs great and has great oil pressure so far. The trans lost OD and they guy had plenty of other trucks so it was cheap cheap. Hoping I can sell the rest after I pull the motor and get close to breaking even $$$ wise.
Treybizttu is offline   Reply With Quote
Old 11-07-2019, 10:47 AM   #13
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Re: Family Truck Build

Had a flat on one of the wagon wheels so I through the new ones on the front. (Still need to pick up some tires for the rear).

Figured out somebody had cut all of the wheel studs wayyyyy short so there are only a few threads in each lug nut. I guess i'll need to pound them all out and put some longer ones back in before it's road worthy.
Attached Images
 
Treybizttu is offline   Reply With Quote
Old 11-07-2019, 10:54 AM   #14
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Re: Family Truck Build

Couple More Pictures including the motor donor.
Attached Images
   
Treybizttu is offline   Reply With Quote
Old 11-13-2019, 12:21 PM   #15
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Re: Family Truck Build

I've got a few parts that I'm not going to use I'm curious if there is a market for?

Guage Cluster (Looks ok, not sure if functional)
Interior Door Panels: Surface Rust and Speaker Holes Cut out that look like they were done with a dull knife.
Steel Wheels (Might be Reproductions. I haven't gotten them out of the box)
Seat Frame with some Broken Springs.
Hubcaps (Have been painted)

Not sure if this stuff is worth posting for sale?
Treybizttu is offline   Reply With Quote
Old 11-13-2019, 05:38 PM   #16
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Re: Family Truck Build

Also looking for a set of Upper/Lower Control Arms Complete and Trailing Arms... Found a line on a nice frame (mine isn't great) so I could build a roller with my 5.3/auto and then swap the body over.
Treybizttu is offline   Reply With Quote
Old 11-18-2019, 02:48 PM   #17
Treybizttu
Registered User
 
Join Date: May 2019
Location: NRH, Texas
Posts: 17
Re: Family Truck Build

Picked up a boxed and blasted frame this weekend in much better shape than mine. Also picked up a set of control Arms, Trailing Arms, and another axle.


Going to build a roller chassis with my 5.3 (plus a 4l60e) and build from there.

Frame and Control Arms came with a set of Mcaughys Spindles too.
Treybizttu is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com