The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-03-2017, 08:57 PM   #1
crewcabshorty
Registered User
 
crewcabshorty's Avatar
 
Join Date: Jan 2012
Location: greenville pa 16125
Posts: 283
4l80 adapter

I am putting a 4l80 in my 1985 k30 . I have a 241 transfer case to put behind it . I am having a hard time finding a adapter to connect the two . Are they available?
crewcabshorty is offline   Reply With Quote
Old 09-03-2017, 10:28 PM   #2
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: 4l80 adapter

I just looked thru advance adapters and novak..neither have one ,and if they don't, good chance nobody does..found a factory one on ebay but when I pulled it up it says sold..something i read on pirates 4x4 says it may have came only in 89-91 2500 suburbans

Last edited by mongocanfly; 09-03-2017 at 10:38 PM.
mongocanfly is offline   Reply With Quote
Old 09-03-2017, 10:50 PM   #3
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: 4l80 adapter

found this in your neck of the woods....http://www.ebay.com/itm/4L80E-TH400-...BZefRI&vxp=mtr
mongocanfly is offline   Reply With Quote
Old 09-04-2017, 02:21 AM   #4
OldCreek
Registered User
 
OldCreek's Avatar
 
Join Date: Jan 2007
Location: Central Coast California
Posts: 1,026
Re: 4l80 adapter

Driver drop 4l80e/np241 adapters should work on passenger drop np241/np208 cases,iirc...

Maybe this broadens your search?

Wil
__________________
1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold
1972 C10 5.3L/4L60E 12bolt 5Lug - Sold
1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!!
1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold
1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold
1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold)
2003 K2500HD 8.1/Allison1000/NP263
OldCreek is offline   Reply With Quote
Old 09-04-2017, 02:33 AM   #5
87Skier
Registered User
 
87Skier's Avatar
 
Join Date: Mar 2014
Location: Corvallis, OR
Posts: 711
Re: 4l80 adapter

I looked at putting a 4L80 in my 89 suburban. I read that the adapter in my truck bolts to the 4L80 but a spacer is needed. What does your adapter look like? I thought all turbo 400 had the same output flange and shaft as the early 4L80's.
__________________
1972 GMC Jimmy Custom 4.8L (L20)/6L90E/NP205
1989 Chevy Suburban V2500 350/Turbo 400/4.11 gears
1996 Chevy Suburban K1500 350/4L60E
87Skier is offline   Reply With Quote
Old 09-04-2017, 10:11 PM   #6
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: 4l80 adapter

the 4l80-e has a tiny bit different ring cast in the adapter were the BIG square cut o-ring sits from a th400 . also th400 adapters have feet forward for the mount to bolt on the bottom and these hit the case of a 4l80-e . true 4l80-e adapter has feet rear word .

th400/round 205 adapter = pic 1 and feet forward .

4l80-e/round 205 adapter = pic 2 feet rearward .

i know not for 241 case but shows the idea .
Attached Images
  
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 09-04-2017, 10:14 PM   #7
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: 4l80 adapter

then that difference i was talking about and a spacer ring a guy made for his combo .

i do also know in the 205 adapter family the th400 unit is a tad shorter/thinner than the 4l80-e unit . so the spacer serves 2 things . spacer to make this up and conversion of the ring size difference .
Attached Images
   
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com