Need Help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DBOE · 05-04-2003, 02:06 AM

hello everyone I am trying to fix my 71 GMC pu it has a rebuilt 350 with a nice cam (spec ?) I need some help fixing the timing If you can help please e-mail me thanx

O'l Buck · 05-04-2003, 02:35 AM

First off, Welcome to the greatest truck board on the net. Second, some specific idea of what your problem is would help us to help you figure it out. If you're wanting to know how to time it initially, I always start mine out at 8 degrees BTDC and go from there.

Longhorn Man · 05-04-2003, 10:57 AM

Welcome from Ohio. Be happy you are in the land of plentifull/clean trucks. I miss Texas trucks.
Are you talking about the timing for your spark...or timing as in you are trying to install a new chain?

DBOE · 05-04-2003, 11:35 AM

well actually the timing WAS fine but my truck wasnt going over 40 and I was told it could be that little suction thing on the ditributor that goes to the carburator but then I was told it most likly was my transmission modulator I fixed it but I had to take off the distributor in order to take out that suction thing and to find out when I went to autozone they told me it was fine and they made a mistake in what I needed to take out and I put it all back but now the truck wont turn all the way over almost but doesnt and I am just learning to work on rthis truck I have fixed many things that might take you guys a couple of minutes to a few hours but for me a few days, but I read that book (chilton) and I finally will figure it out but timing is not in the book so if that is enough info okease help

05-04-2003, 02:06 AM	#1
DBOE Registered User Join Date: May 2003 Location: Dallas, Texas Posts: 3	Need Help hello everyone I am trying to fix my 71 GMC pu it has a rebuilt 350 with a nice cam (spec ?) I need some help fixing the timing If you can help please e-mail me thanx

05-04-2003, 02:35 AM	#2
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	First off, Welcome to the greatest truck board on the net. Second, some specific idea of what your problem is would help us to help you figure it out. If you're wanting to know how to time it initially, I always start mine out at 8 degrees BTDC and go from there. __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

05-04-2003, 10:57 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Welcome from Ohio. Be happy you are in the land of plentifull/clean trucks. I miss Texas trucks. Are you talking about the timing for your spark...or timing as in you are trying to install a new chain?

05-04-2003, 11:35 AM	#4
DBOE Registered User Join Date: May 2003 Location: Dallas, Texas Posts: 3	well actually the timing WAS fine but my truck wasnt going over 40 and I was told it could be that little suction thing on the ditributor that goes to the carburator but then I was told it most likly was my transmission modulator I fixed it but I had to take off the distributor in order to take out that suction thing and to find out when I went to autozone they told me it was fine and they made a mistake in what I needed to take out and I put it all back but now the truck wont turn all the way over almost but doesnt and I am just learning to work on rthis truck I have fixed many things that might take you guys a couple of minutes to a few hours but for me a few days, but I read that book (chilton) and I finally will figure it out but timing is not in the book so if that is enough info okease help



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.