Temp sending unit question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72LB · 06-05-2018, 03:17 PM

The temp gauge hasn't worked in my 69 since I recently bought it. I've tested the gauge and it's working so I changed the sender( twice so far ) and nothing. It's the spade type connection which was in it when I got it but is it possible it's the wrong sender? I told the guy at the parts store it was for a gauge but I just noticed on rockauto that the gauge sender has a button head not the spade connection. Have I been putting in the wrong sender?

**FirstOwner69** · 06-05-2018, 03:35 PM

Should be a button head. Not sure hat you have, but the idot light sensor had a spade connector.

72LB · 06-05-2018, 03:55 PM

It had a spade connector on it and that's what the parts guy gave me , Twice I might add. It's funny the guy even asked if it was gauge or light, told him gauge.

**ga-stepside** · 06-05-2018, 06:36 PM

The gauge sender I got from Rockauto has a spade, works fine.

**dmjlambert** · 06-05-2018, 06:39 PM

I used GM part number 12334869, AC Delco number G1852.

OregonNed · 06-05-2018, 06:52 PM

This worked well for me:

https://www.lectriclimited.com/elect...ing-unit-86917

72LB · 06-06-2018, 07:28 AM

Thanks guys. I found the right one at NAPA, not going back to advance.

06-05-2018, 03:17 PM	#1
72LB Registered User Join Date: May 2017 Location: Inman/Boiling Springs, SC Posts: 420	Temp sending unit question The temp gauge hasn't worked in my 69 since I recently bought it. I've tested the gauge and it's working so I changed the sender( twice so far ) and nothing. It's the spade type connection which was in it when I got it but is it possible it's the wrong sender? I told the guy at the parts store it was for a gauge but I just noticed on rockauto that the gauge sender has a button head not the spade connection. Have I been putting in the wrong sender?

06-05-2018, 03:35 PM	#2
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,838	Re: Temp sending unit question Should be a button head. Not sure hat you have, but the idot light sensor had a spade connector.

06-05-2018, 03:55 PM	#3
72LB Registered User Join Date: May 2017 Location: Inman/Boiling Springs, SC Posts: 420	Re: Temp sending unit question It had a spade connector on it and that's what the parts guy gave me , Twice I might add. It's funny the guy even asked if it was gauge or light, told him gauge.

06-05-2018, 06:36 PM	#4
ga-stepside Senior Member Join Date: Jan 2016 Location: Sugar Hill GA Posts: 368	Re: Temp sending unit question The gauge sender I got from Rockauto has a spade, works fine. __________________ 1967 C10 Step side 1970 AMX 390 1977 Datsun 280Z highly modified with '95 LT1 power

06-05-2018, 06:39 PM	#5
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,561	Re: Temp sending unit question I used GM part number 12334869, AC Delco number G1852.

06-05-2018, 06:52 PM	#6
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: Temp sending unit question This worked well for me: https://www.lectriclimited.com/elect...ing-unit-86917 __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

06-06-2018, 07:28 AM	#7
72LB Registered User Join Date: May 2017 Location: Inman/Boiling Springs, SC Posts: 420	Re: Temp sending unit question Thanks guys. I found the right one at NAPA, not going back to advance.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.