The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-29-2017, 06:52 PM   #1
81turbota
Registered User
 
Join Date: Jul 2017
Location: Pasadena, CA
Posts: 44
New 71 Blazer owner - vague steering bump steer

Hi everyone,

I'm the proud new owner of a 1971 Blazer. I have been having a blast driving this thing topless in CA. I have currently restored the dash and done some basic tune up and maintenance.

This is my first solid front axle vehicle, I have plenty of Chevelles, Camaros, Trans Ams etc prior to this. So this is not my area of expertise.

The truck drives great (albeit slow).

-unknown 4" lift
-33" tires

Symptoms:
-steering is nice and tight most of the time
-cruises 65mph no problem, very smooth. If I hit a bump on the highway it can get a little nerve wracking as the truck will wander a few feet and I can't anticipate where.
-steering wheel rarely centers at the same spot; I'd hit a bump or pothole and after correcting the steering wheel is pointed in a different direction when going straight. Always bounces between the 9 and 3 o clock positions.
-when I hit a bump, the steering seems unresponsive until the vehicle settles.
-if I hit a bump mid corner (slow speed), the truck feels like it momentarily understeers and pushes through the corner, once it settles everything steers normally.
-I noticed the tie rod is bent near the steering stabilizer

Troubleshooting performed as of now:
-jacked up front end and checked for looseness in ball joints and tie rods. Everything is nice and tight.
-checked tightness of the steering box, nothing loose or cracked
-nothing binding in column
-body mounts are absolutely shot, that's the next weekend project
-front spring bushings falling apart, going to repair those along with the body mounts
-the pitman arm and drag link seem to be at an extreme angle. I just ordered the Skyjacker CA50 dropped pitman arm

I've included various pictures as they speak a lot more than I can.

Thanks for your input, I'm very happy to have one of my dream vehicles!!!





81turbota is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com