The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-18-2015, 08:44 PM   #101
aerotruk63
Check The Champ, Demonstrator
 
aerotruk63's Avatar
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,625
Re: The 60-66 "PAYING IT FORWARD" thread!

Your top could easily be cut down to a short box 63GENIII and cut out to a Panoramic View.
__________________
1963 Chevrolet Truck Literature
LINK: https://picasaweb.google.com/113840717762774560215

YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows.
https://www.youtube.com/results?sear...otruk63&page=1
aerotruk63 is offline   Reply With Quote
Old 07-19-2015, 11:17 AM   #102
'63GENIII
Registered User
 
'63GENIII's Avatar
 
Join Date: Sep 2008
Location: San Carlos, Ca.
Posts: 3,047
Re: The 60-66 "PAYING IT FORWARD" thread!

AWW Norm! It's taken me a while to get the nerve to get rid of it! Ive been wrestling with the idea of narrowing it a little and shortening it a couple of inches (for some reason its a little too long). I finally got tired of it sitting in the from yard and me not having the time to mess with it. Now Im thinking about it again! Lol. I guess I could re sheet it with flat aluminum after all the mods were done. Oh well, if it goes to a good home, it goes. If not, its back on the to do list.
__________________
Chris


'63 k15 long step
Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205
52" front and 63" rear spring swap
D44 / 14bff - disc axles
Milemarker 9K and 10.5K hydraulic winches

63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread


NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build

L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29
'63GENIII is online now   Reply With Quote
Old 07-19-2015, 07:58 PM   #103
aerotruk63
Check The Champ, Demonstrator
 
aerotruk63's Avatar
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,625
Re: The 60-66 "PAYING IT FORWARD" thread!

I'll fly in this winter and we'll cut it down together. Nice break for me and a nice piece for you.
__________________
1963 Chevrolet Truck Literature
LINK: https://picasaweb.google.com/113840717762774560215

YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows.
https://www.youtube.com/results?sear...otruk63&page=1
aerotruk63 is offline   Reply With Quote
Old 07-23-2015, 07:50 PM   #104
Evoracer
Registered User
 
Join Date: Jan 2015
Location: Anaheim, ca
Posts: 120
Re: The 60-66 "Pay It Forward" thread!

Quote:
Originally Posted by evoracer View Post
this thread is just in time...thx.

Free. Complete front brakes, drums, backing plates, wheel cylinders, hoses, hdwr, stk spindles off of 63 c10.

In anaheim, ca. Will not ship.
bump
Evoracer is offline   Reply With Quote
Old 08-03-2015, 12:34 PM   #105
hotrodrx
Registered User
 
Join Date: May 2015
Location: San mateo
Posts: 10
Re: The 60-66 "PAYING IT FORWARD" thread!

I have several free GMC item
1. Running 292 engine, with clutch, bell housing, sm420 transmission, 3/4 ton rear end with springs, tires and wheels, 6 lug. Front and rear bumpers, driver quality. Zip code 32187. Will need to be picked up. Bill
__________________
65 gmc project, 67 gto conv., 62 pontiac catalina, 62 SD 389
hotrodrx is offline   Reply With Quote
Old 08-05-2015, 12:55 AM   #106
slepysal
Registered User
 
slepysal's Avatar
 
Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,077
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by hotrodrx View Post
I have several free GMC item
1. Running 292 engine, with clutch, bell housing, sm420 transmission, 3/4 ton rear end with springs, tires and wheels, 6 lug. Front and rear bumpers, driver quality. Zip code 32187. Will need to be picked up. Bill
Shoot I would have taken the 292 if you were in San Mateo Ca!!!
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes.

"Over, Around or through it... "
slepysal is offline   Reply With Quote
Old 08-08-2015, 08:17 PM   #107
Johns66
Registered User
 
Join Date: Mar 2013
Location: Waco, Texas
Posts: 411
Re: The 60-66 "PAYING IT FORWARD" thread!

Anyone want two 6.5 x 16 inch factory steel 3 nub, 6 lug wheels free?

Pay actual shipping


John

Waco, TX
Johns66 is offline   Reply With Quote
Old 08-08-2015, 09:27 PM   #108
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,453
Re: The 60-66 "PAYING IT FORWARD" thread!

SM465 - Supposedly recently rebuilt.
Come get it.
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 08-09-2015, 09:03 AM   #109
66-PMD-GMC
The 60-66 GMC/Pontiac guy....
 
66-PMD-GMC's Avatar
 
Join Date: Oct 2010
Location: Apache Junction, Arizona
Posts: 1,306
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by Johns66 View Post
Anyone want two 6.5 x 16 inch factory steel 3 nub, 6 lug wheels free?

Pay actual shipping


John

Waco, TX
I would if if wasn't a 2 day drive.. lol
__________________


Building Genuine Pontiac Firepowered cars and trucks for several decades.

Why Pontiac?? That's just me daring to be different.

Projects..

63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction.
440CID 2X4 Pontiac
66-PMD-GMC is offline   Reply With Quote
Old 08-09-2015, 11:52 AM   #110
oem4me
Registered User
 
Join Date: Aug 2010
Location: Burbank CA
Posts: 3,055
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by Johns66 View Post
Anyone want two 6.5 x 16 inch factory steel 3 nub, 6 lug wheels free?

Pay actual shipping


John

Waco, TX
You sure that's the correct rim width and height? Is that 6.5 x 16 measured from outside edges or between the beads? If between, I may be interested.

Last edited by oem4me; 08-09-2015 at 05:27 PM.
oem4me is offline   Reply With Quote
Old 08-09-2015, 05:07 PM   #111
shrekbear
Registered User
 
Join Date: Aug 2012
Location: Sacramento CA
Posts: 63
Re: The 60-66 "PAYING IT FORWARD" thread!

I have this seat. I'm in Sacramento CA. It's pretty clean considering. Last I looked, there were no tears in it. The rail says "71 Chevy 1/2 Ton" so it may have come from a wrecking yard or something. It was sitting in my '65, but I'm looking for some Silverado seats or something with built in belts. I'm busy and I don't have time to ship things, but feel free to come and get it. Thanks.Name:  photo-17.JPG
Views: 2501
Size:  45.5 KB
__________________
My First Build: http://67-72chevytrucks.com/vboard/s...d.php?t=541120
shrekbear is offline   Reply With Quote
Old 08-09-2015, 10:52 PM   #112
Raptor0206
Registered User
 
Join Date: Jun 2015
Location: Las Vegas, NV
Posts: 63
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by shrekbear View Post
I have this seat. I'm in Sacramento CA. It's pretty clean considering. Last I looked, there were no tears in it. The rail says "71 Chevy 1/2 Ton" so it may have come from a wrecking yard or something. It was sitting in my '65, but I'm looking for some Silverado seats or something with built in belts. I'm busy and I don't have time to ship things, but feel free to come and get it. Thanks.Attachment 1434242
Dang anyone driving to Vegas from Sacramento??
Raptor0206 is offline   Reply With Quote
Old 08-10-2015, 02:23 AM   #113
Grizz1963
Registered User
 
Grizz1963's Avatar
 
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,426
Re: The 60-66 "PAYING IT FORWARD" thread!

Thought I would just mention on here the Paying it Forward ethos is alive and well in the UK.

Met up with Ian Brown at the NSRA Supernationals yesterday.

I had some useless bits for Ian, Martin had a spare wheel carrier for Ian, Ian in turn had some gearbox seals for Martin and........


Ian had given me a lower A-Arm to replace mine which has been damaged sometime in the past, already cleaned up and painted.

Thanks Ian !!



Secondly, Ian had also brought along both of his trucks old front hubs, all neatly wrapped up.

Thanks again mate.



So again, not a lot of work done, but truck progress
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside
MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.
Grizz1963 is offline   Reply With Quote
Old 08-10-2015, 05:36 AM   #114
aerotruk63
Check The Champ, Demonstrator
 
aerotruk63's Avatar
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,625
Re: The 60-66 "PAYING IT FORWARD" thread!

Rian, nice to see it go international.
__________________
1963 Chevrolet Truck Literature
LINK: https://picasaweb.google.com/113840717762774560215

YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows.
https://www.youtube.com/results?sear...otruk63&page=1
aerotruk63 is offline   Reply With Quote
Old 08-10-2015, 12:07 PM   #115
Evoracer
Registered User
 
Join Date: Jan 2015
Location: Anaheim, ca
Posts: 120
Re: The 60-66 "PAYING IT FORWARD" thread!

Putting this out there though I have not had good luck giving stuff away on this forum...

12 bolt rear end, noisy, but works, drum to drum. New-ish brakes and wheel cylinders, will have to be reassembled as I needed the e-brake cables for a late model swap. Pinion seal leaks a little. Track bar mount has been cut after the pic. Obviously no shipping. Come and get it before it goes to scrap...
Attached Images
 
Evoracer is offline   Reply With Quote
Old 08-10-2015, 12:55 PM   #116
mjh1965
Registered User
 
mjh1965's Avatar
 
Join Date: Sep 2013
Location: Kent England
Posts: 1,025
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by Grizz1963 View Post
Thought I would just mention on here the Paying it Forward ethos is alive and well in the UK.

Met up with Ian Brown at the NSRA Supernationals yesterday.

I had some useless bits for Ian, Martin had a spare wheel carrier for Ian, Ian in turn had some gearbox seals for Martin and........


Ian had given me a lower A-Arm to replace mine which has been damaged sometime in the past, already cleaned up and painted.

Thanks Ian !!



Secondly, Ian had also brought along both of his trucks old front hubs, all neatly wrapped up.

Thanks again mate.



So again, not a lot of work done, but truck progress
As Rian said I also had a part for Ian a spare wheel carrier as I have fitted my tank in the rear bed . So as Rian collected his parts Ian took away the carrier . He gave me a spare set Th350 oil seals that I wasn't expecting so it was thanks all round
__________________
FINALLY PUTTING IT BACK TOGETHER AT LONG LAST

MY BUILD THREAD:

http://67-72chevytrucks.com/vboard/s...d.php?t=611614
mjh1965 is offline   Reply With Quote
Old 08-11-2015, 08:57 PM   #117
Isaiah92260
Registered User
 
Isaiah92260's Avatar
 
Join Date: Jul 2015
Location: Whittier, CA
Posts: 851
Re: The 60-66 "PAYING IT FORWARD" thread!

Edited by Forum Staff.
If you read the rules in the first page, you'll see that this is a thread for generous members who are willing to give away parts.
NOT for non-supporting members asking for free for parts.

Last edited by 63 & 64 Bowties; 08-11-2015 at 09:11 PM.
Isaiah92260 is offline   Reply With Quote
Old 08-11-2015, 09:00 PM   #118
Johns66
Registered User
 
Join Date: Mar 2013
Location: Waco, Texas
Posts: 411
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by oem4me View Post
You sure that's the correct rim width and height? Is that 6.5 x 16 measured from outside edges or between the beads? If between, I may be interested.
Correction 6.5 x 16.5 edge to edge.
Johns66 is offline   Reply With Quote
Old 08-12-2015, 01:46 AM   #119
oem4me
Registered User
 
Join Date: Aug 2010
Location: Burbank CA
Posts: 3,055
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by Johns66 View Post
Correction 6.5 x 16.5 edge to edge.
Based on those outside numbers, the rims are likely the original 15 x 5.5's
Thanks very much, but I'm going to pass on them.
oem4me is offline   Reply With Quote
Old 08-12-2015, 11:43 AM   #120
blown240
Registered User
 
blown240's Avatar
 
Join Date: Jan 2011
Location: CA
Posts: 772
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by Evoracer View Post
Putting this out there though I have not had good luck giving stuff away on this forum...

12 bolt rear end, noisy, but works, drum to drum. New-ish brakes and wheel cylinders, will have to be reassembled as I needed the e-brake cables for a late model swap. Pinion seal leaks a little. Track bar mount has been cut after the pic. Obviously no shipping. Come and get it before it goes to scrap...
IF this is still available, Ill grab it. Ill send you a PM.
__________________
'61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE
blown240 is offline   Reply With Quote
Old 08-12-2015, 12:48 PM   #121
ol_skool_chevy
Registered User
 
ol_skool_chevy's Avatar
 
Join Date: May 2010
Location: Hillsboro, Oregon 97123
Posts: 1,300
I have a 1966 long bed frame roller free if anyone wants it. Hillsboro oregon
Posted via Mobile Device
ol_skool_chevy is offline   Reply With Quote
Old 08-13-2015, 09:22 AM   #122
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: The 60-66 "PAYING IT FORWARD" thread!

ol skool, I wish you did not live so far away. That is what I need to start my winter project...dang it...
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 08-13-2015, 04:18 PM   #123
Evoracer
Registered User
 
Join Date: Jan 2015
Location: Anaheim, ca
Posts: 120
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by Evoracer View Post
Putting this out there though I have not had good luck giving stuff away on this forum...

12 bolt rear end, noisy, but works, drum to drum. New-ish brakes and wheel cylinders, will have to be reassembled as I needed the e-brake cables for a late model swap. Pinion seal leaks a little. Track bar mount has been cut after the pic. Obviously no shipping. Come and get it before it goes to scrap...
Rear end gone! Thanks blown240!
Evoracer is offline   Reply With Quote
Old 08-13-2015, 04:19 PM   #124
blown240
Registered User
 
blown240's Avatar
 
Join Date: Jan 2011
Location: CA
Posts: 772
Re: The 60-66 "PAYING IT FORWARD" thread!

Thank You!
__________________
'61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE
blown240 is offline   Reply With Quote
Old 08-20-2015, 12:36 AM   #125
63ChevC10
Registered User
 
63ChevC10's Avatar
 
Join Date: Sep 2012
Location: Graham, WA
Posts: 136
Re: The 60-66 "PAYING IT FORWARD" thread!

I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two.

Jerry
63ChevC10 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com