86 Silverado Father and Son project - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scotts62 · 06-10-2010, 07:47 PM

Cool man progress!!

I though my 92 was free of rust mostly but found the weak spots on the cab corners, paint looks good but you can push it in over a 1/4 in and if you wanted to push your thumb through it

joe231 · 06-10-2010, 08:22 PM

Quote:

Originally Posted by mcbassin

Thanks Scott!

Thanks Joe!
Size 18" yes, I'm aware of the rotor issue. No problem there, I'll just taper the rotor back a little. (machine access at work)

that's a nice perk!!

Quote:

Originally Posted by mcbassin

Thanks again for the diagram. I went wire to wire and it worked great. Nice tip on the ground too, turns out the pass. side ground was cut and kept it from working. Spliced it back together and had all the lights working.

glad you got it working!

How soon do you figure before your ready for paint?

mcbassin · 06-10-2010, 09:14 PM

Quote:

Originally Posted by joe231

How soon do you figure before your ready for paint?

We could have it ready for paint by next week if we hit it real hard. Don't suspect that will happen. More than likely by the end of June. Still have a bunch of sanding to do. It's pretty hard to stay hooked up on it with our busy schedule.

It really has come a long ways and we have a vision now of what it will look when done with only a few minor differences (including the wheels and ride height)............................................................................................. .................................................................................................... .................................................................................................... ...............
Look familiar?

joe231 · 06-10-2010, 09:41 PM

scotts62 · 06-10-2010, 10:21 PM

Oh yeah thats going to look nice!!!!!

my67chevytruck · 06-22-2010, 09:34 AM

nice progress Mike.....

mcbassin · 07-03-2010, 06:56 PM

Well, we have been working on the truck a lot lately. Not really a lot to show since body work is soooo slow. Anyway, we prepped the jambs and finally put some paint down today. Hope to wrap up the body on Monday (holiday)

. Maybe even get the exterior painted. In case your wondering, I chose Dupont Nason single stage urethane. Sorry crappy cell phone pics.

Removed the door panels and started sanding the jambs.

Ready for paint:

Painted:

cableguy0 · 07-03-2010, 06:59 PM

That should look real good when its done. Im sure the engine swap seems like a breeze after doing all that body work.

mcbassin · 07-03-2010, 07:50 PM

Here are couple from a little better camera. Still kinda blurry though. I think there's just not enough light in the shop.

mcbassin · 07-03-2010, 07:52 PM

Quote:

Originally Posted by cableguy0

That should look real good when its done. Im sure the engine swap seems like a breeze after doing all that body work.

Thanks Cableguy! Your right, I would much rather be wrenching than this crap. It is definetly easier

joe231 · 07-03-2010, 09:06 PM

That looks good!
Where do you buy the Dupont Nason paint?

rfmaster · 07-03-2010, 10:06 PM

Quote:

Originally Posted by mcbassin

Here are couple from a little better camera. Still kinda blurry though. I think there's just not enough light in the shop.

Hey who said you could not build a new truck?! Very good pictures!

//RF

mcbassin · 07-03-2010, 11:29 PM

Quote:

Originally Posted by joe231

That looks good!
Where do you buy the Dupont Nason paint?

Thanks Joe! You can buy it at most Oreilly Auto parts stores. I have sprayed probably 20 gallons in the past with really good results. It can be cleared over too if you want extra depth. Anyway, they sell factory packs (limited colors) with paint, reducer, and catylist for around $140. I like base/clear but on solid colors this stuff is hard to beat for the money.

Quote:

Originally Posted by rfmaster

Hey who said you could not build a new truck?! Very good pictures!

//RF

Thanks RF! It's getting there. Can't wait to see the paint FINISHED
My boat has been under a cover outside for a week now. I can't take that much longer.

scotts62 · 07-04-2010, 12:21 AM

Cool man looks good! Cant wait to see it finished either

joe231 · 07-04-2010, 12:47 AM

Thanks for the info Mike!

scotts62 · 07-04-2010, 09:59 AM

That urethane is some cool stuff, i painted a motorcycle tank last weekend and it turned out nice.

mcbassin · 07-04-2010, 10:55 AM

Quote:

Originally Posted by scotts62

That urethane is some cool stuff, i painted a motorcycle tank last weekend and it turned out nice.

Yep, it really is good stuff. I had some trucks for 4 years that still looked great even sitting in the direct sun.

bjcaldwe · 07-04-2010, 12:31 PM

Great progress.

scotts62 · 07-04-2010, 03:36 PM

I painted my old 83 with urethane and cleared over it, it came out nice.

mcbassin · 07-04-2010, 06:33 PM

Quote:

Originally Posted by bjcaldwe

Great progress.

Thanks man!

Quote:

Originally Posted by scotts62

I painted my old 83 with urethane and cleared over it, it came out nice.

great looking truck Scott!

joe231 · 07-04-2010, 08:49 PM

Quote:

Originally Posted by scotts62

I painted my old 83 with urethane and cleared over it, it came out nice.

nice 4x4!

scotts62 · 07-05-2010, 12:24 AM

Quote:

Originally Posted by joe231

nice 4x4!

your just jealous because mine was one color

joe231 · 07-05-2010, 12:26 AM

Quote:

Originally Posted by scotts62

your just jealous because mine was one color

that is a BURN!!!!

scotts62 · 07-05-2010, 12:27 AM

mcbassin · 07-07-2010, 09:53 PM

Time for some paint....FINALLY!
Dang, I forgot how much work this is. My buddy has a quick setup paint booth that he came over and helped set up. It only took about an hour and a half to get it ready another couple of hours taping it off and cleaning. This morning we got up bright and early and laid some paint on it. It turned out pretty good considering my body work skills aren't the best. It has a few areas that need some work but all in all not too bad. on to the pics:

Sanding done ready for the booth.

Setting up the booth:

Inside the booth:

Ready to shoot:

Paint:

06-10-2010, 07:47 PM	#151
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 5.7 TBI in an 86????? Anyone done this swap?? Cool man progress!! I though my 92 was free of rust mostly but found the weak spots on the cab corners, paint looks good but you can push it in over a 1/4 in and if you wanted to push your thumb through it __________________ Scott 93 crew cab build Project 62

06-10-2010, 09:41 PM	#154
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 5.7 TBI in an 86????? Anyone done this swap?? __________________ *CHEVY ONLY*

06-10-2010, 10:21 PM	#155
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 5.7 TBI in an 86????? Anyone done this swap?? Oh yeah thats going to look nice!!!!! __________________ Scott 93 crew cab build Project 62

06-22-2010, 09:34 AM	#156
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 5.7 TBI in an 86????? Anyone done this swap?? nice progress Mike..... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

07-03-2010, 06:56 PM	#157
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 5.7 TBI in an 86????? Anyone done this swap?? Well, we have been working on the truck a lot lately. Not really a lot to show since body work is soooo slow. Anyway, we prepped the jambs and finally put some paint down today. Hope to wrap up the body on Monday (holiday). Maybe even get the exterior painted. In case your wondering, I chose Dupont Nason single stage urethane. Sorry crappy cell phone pics. Removed the door panels and started sanding the jambs. Ready for paint: Painted: __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-03-2010, 06:59 PM	#158
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: 5.7 TBI in an 86????? Anyone done this swap?? That should look real good when its done. Im sure the engine swap seems like a breeze after doing all that body work. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

07-03-2010, 07:50 PM	#159
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 5.7 TBI in an 86????? Anyone done this swap?? Here are couple from a little better camera. Still kinda blurry though. I think there's just not enough light in the shop. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-03-2010, 09:06 PM	#161
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 5.7 TBI in an 86????? Anyone done this swap?? That looks good! Where do you buy the Dupont Nason paint? __________________ *CHEVY ONLY* Last edited by joe231; 07-03-2010 at 09:08 PM.

07-04-2010, 12:21 AM	#164
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 5.7 TBI in an 86????? Anyone done this swap?? Cool man looks good! Cant wait to see it finished either __________________ Scott 93 crew cab build Project 62

07-04-2010, 12:47 AM	#165
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 5.7 TBI in an 86????? Anyone done this swap?? Thanks for the info Mike! __________________ *CHEVY ONLY*

07-04-2010, 09:59 AM	#166
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 5.7 TBI in an 86????? Anyone done this swap?? That urethane is some cool stuff, i painted a motorcycle tank last weekend and it turned out nice. __________________ Scott 93 crew cab build Project 62

07-04-2010, 12:31 PM	#168
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: 5.7 TBI in an 86????? Anyone done this swap?? Great progress. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

07-04-2010, 03:36 PM	#169
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 5.7 TBI in an 86????? Anyone done this swap?? I painted my old 83 with urethane and cleared over it, it came out nice. __________________ Scott 93 crew cab build Project 62

07-05-2010, 12:27 AM	#174
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 5.7 TBI in an 86????? Anyone done this swap?? __________________ Scott 93 crew cab build Project 62

07-07-2010, 09:53 PM	#175
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 5.7 TBI in an 86????? Anyone done this swap?? Time for some paint....FINALLY! Dang, I forgot how much work this is. My buddy has a quick setup paint booth that he came over and helped set up. It only took about an hour and a half to get it ready another couple of hours taping it off and cleaning. This morning we got up bright and early and laid some paint on it. It turned out pretty good considering my body work skills aren't the best. It has a few areas that need some work but all in all not too bad. on to the pics: Sanding done ready for the booth. Setting up the booth: Inside the booth: Ready to shoot: Paint: __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.