Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-18-2021, 01:27 PM | #1 |
Senior Member
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,118
|
Your favorite Engine Bays
Personally I like 1971ish original or a well modified GM BBC. Wouldn't be a Ford but Mopar is nice, IMO.
Here's a nice GM example, even with the smog pump. 71 Corvette. https://www.youtube.com/watch?v=iK2YHENqb5w
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring it from ground up. With assys, the guide accts for 1000s of OEM identifications and part numbers, all written in short order. 700+ images include assm, illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025 |
02-18-2021, 01:38 PM | #2 |
Registered User
Join Date: May 2015
Location: Montana
Posts: 3,696
|
Re: Your favorite Engine Bays
The old six banger trucks where you could see lots of dirt below
__________________
Current/past Chevy/GMC trucks: 1958 Chevy C-60; 1965 GMC C-50; 1965 Chevy C-10; 1971 Chevy K-10; 1973 Chevy K-20; 1976 GMC C-20; 1977 Chevy C-10 Suburban; 1980 Chevy K-10; 1989 Chevy K1500; 1991 GMC V1500 Suburban; 2016 Chevy K2500 HD Other vehicles: 1988 Jeep XJ; 2011 Toyota 4Runner |
02-18-2021, 01:52 PM | #3 |
Senior Member
Join Date: Dec 2013
Location: Gods country East,Tn
Posts: 8,545
|
Re: Your favorite Engine Bays
The Supercar Destroyer - 1967 LT1 C2 Corvette Twin turbo 62's - 176.19 MPH
https://www.youtube.com/watch?v=_DDswtLUhdM
__________________
1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop Last edited by Grumpy old man; 02-18-2021 at 01:58 PM. |
02-18-2021, 05:19 PM | #4 |
Senior Member
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,791
|
Re: Your favorite Engine Bays
I'll admit I have a prejudice, but I really enjoy looking at this one:
__________________
I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson Last edited by truckster; 02-18-2021 at 11:05 PM. |
02-18-2021, 05:48 PM | #5 |
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 1,918
|
Re: Your favorite Engine Bays
Mine looks like this.
|
02-18-2021, 06:00 PM | #6 |
R.I.P. E.S.L.L.
Join Date: Aug 2005
Location: Kernville CA./ Lake Isabella CA.
Posts: 11,411
|
Re: Your favorite Engine Bays
I always have had a soft spot for the old Red Ram hemi's. Never owned one but they look cool under the hood.
__________________
1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God. |
02-18-2021, 06:31 PM | #7 |
Senior Member
Join Date: Oct 2015
Location: Brownsburg, IN
Posts: 1,072
|
Re: Your favorite Engine Bays
I've been partial to this one for awhile, not 100% original appearance, but close...
__________________
1972 Blazer Highlander 1971 GMC K1500 SWB (sold) |
02-18-2021, 06:33 PM | #8 | |
Registered User
Join Date: Oct 2016
Location: Dallas Texas
Posts: 2,860
|
Re: Your favorite Engine Bays
Quote:
-klb
__________________
67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold |
|
02-18-2021, 11:23 PM | #9 |
R.I.P. E.S.L.L.
Join Date: Aug 2005
Location: Kernville CA./ Lake Isabella CA.
Posts: 11,411
|
Re: Your favorite Engine Bays
__________________
1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God. |
02-18-2021, 11:33 PM | #10 |
Senior Member
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,838
|
Re: Your favorite Engine Bays
283 with dual 4s.
__________________
Jim |
02-19-2021, 12:48 AM | #11 |
Senior Member
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,118
|
Re: Your favorite Engine Bays
Exceptional Jim. I can't see Nail heads more than it's very clean. This belongs to Vogel & it pops. Not quite a pic of an engine bay but it's easy to imagine it's as nice.
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring it from ground up. With assys, the guide accts for 1000s of OEM identifications and part numbers, all written in short order. 700+ images include assm, illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025 |
02-19-2021, 04:27 PM | #12 |
Moderator
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Your favorite Engine Bays
I'm still working on mine.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
02-19-2021, 05:20 PM | #13 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Your favorite Engine Bays
I sorta like these myself.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
02-19-2021, 05:27 PM | #14 |
R.I.P. E.S.L.L.
Join Date: Aug 2005
Location: Kernville CA./ Lake Isabella CA.
Posts: 11,411
|
Re: Your favorite Engine Bays
__________________
1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God. |
02-19-2021, 10:23 PM | #15 |
Senior Member
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,118
|
Re: Your favorite Engine Bays
Was thinking about the same thing over post #5 it's really a mess
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring it from ground up. With assys, the guide accts for 1000s of OEM identifications and part numbers, all written in short order. 700+ images include assm, illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025 |
02-19-2021, 11:49 PM | #16 |
Who Changed This?
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,081
|
Re: Your favorite Engine Bays
<slowly pulls picture of slimy old engine out of view>
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
02-20-2021, 12:55 AM | #17 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Your favorite Engine Bays
Heck I even like the one in my old Ramp truck. They don't have to be polished up for me to like them. They have to run good not look good and be able to make 3000 mile road trips.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
02-22-2021, 01:19 PM | #18 |
Registered User
Join Date: Mar 2012
Location: Woodbury, Ct.
Posts: 1,663
|
Re: Your favorite Engine Bays
I always thought that TPI's looked pretty cool.
|
02-22-2021, 01:55 PM | #19 | |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Your favorite Engine Bays
Quote:
I took mine out after 300,000 and installed the 6.0 LS.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
02-22-2021, 03:19 PM | #20 |
Registered User
Join Date: Sep 2018
Location: Moss Bluff, LA
Posts: 381
|
Re: Your favorite Engine Bays
not exactly a favorite (yet), but working on my current daily driver.
waiting for a fuel rail cover to arrive (going red also), and will do the intake cover (gloss black). once i install the air intake tube, i think it will give it a nice look. |
02-22-2021, 04:51 PM | #21 |
R.I.P. E.S.L.L.
Join Date: Aug 2005
Location: Kernville CA./ Lake Isabella CA.
Posts: 11,411
|
Re: Your favorite Engine Bays
How about this one... A Yugo!!
Okay. I'm just kidding around. But I did know a chick that had a Yugo and she couldn't kill it. She never maintained it and it just kept going and going. Although it looked like it had been through a war. That POS wouldn't die.
__________________
1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God. |
02-27-2021, 12:27 PM | #22 |
Senior Member
Join Date: Dec 2011
Location: Reading,Pa.
Posts: 439
|
Re: Your favorite Engine Bays
I sold this 66 coronet in January.One of my favorite engine bays...Rob
__________________
|
02-28-2021, 09:53 AM | #23 |
Registered User
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
|
Re: Your favorite Engine Bays
This one...
|
03-01-2021, 12:06 AM | #24 |
Registered User
Join Date: Mar 2016
Location: Manlius, NY
Posts: 1,698
|
Re: Your favorite Engine Bays
Need to clean up my plug wires, but mine is coming along and since this is my first build...I am partial to it.
|
03-01-2021, 12:40 AM | #25 |
Senior Member
Join Date: Mar 2016
Location: Near Canon City ,Colorado
Posts: 3,837
|
Re: Your favorite Engine Bays
It's a toss up.
__________________
'35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 MIKE
|
Bookmarks |
|
|