|
01-31-2014, 02:09 AM
|
#1 |
|
Registered User
Join Date: Feb 2013
Location: Longview, Texas
Posts: 173
|
Rear shock help......
I am in desperate need of some help. I have a 1970 stepside with 4" lowering springs in the rear. I have installed a shock relocator kit from Classic Parts and bought their rear shock relocator kit. I bought some Belltech Nitro Drop shocks and the stud is too big to fit in the bottom bushing. I have called Classic Parts and they say that the stud is the correct size and I also called Belltech and they say the shock is correct. The bushing for the shock is 1/2" in diameter and the stud is 5/8" in diameter. I tried to drill the inner sleeve out to the correct size but I got the hole crooked so now that shock is useless. Can I just replace the bushing with larger diameter ones or does anyone else have a better solution? I tried to include a picture of the shock studs but I couldn't figure out how to get in one here....
|
|
|
|
01-31-2014, 09:37 AM
|
#2 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,917
|
Re: Rear shock help......
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
|
02-01-2014, 08:07 AM
|
#3 |
|
Registered User
Join Date: Jan 2014
Location: Florida
Posts: 9
|
Re: Rear shock help......
have you tried putting some grease in the thread and pressing it in the bushing?
__________________
I am an immigrant from France and love my '87 Chevy Truck. Sorry English not so good. I want to make friend and write here. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
