IN Fleetside bed floor patch panels - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70STOVEBOLT** · 10-03-2017, 09:52 PM

Quote:

Originally Posted by jessemthompson

I missed your reply to my post and haven’t been active as of late. Looking for around an 8X8 piece. Just need it to run across 3 ribs evenly shipped to 28376. Thanks

I can cut you an 8 x 8 patch, $26 shipped. Let me know if that works for you and I will cut it tomorrow night after work.

jessemthompson · 10-03-2017, 10:00 PM

Sounds good. Pm me your PayPal address please

**70STOVEBOLT** · 10-07-2017, 09:50 PM

Bob and Jesse I have your panels cut. I will ship on Monday.

**70STOVEBOLT** · 10-07-2017, 09:52 PM

I have other panels available if anyone else needs any.

**70STOVEBOLT** · 10-11-2017, 06:43 PM

Sizes that are left are:

3” x 24” $27 shipped
4” x 16” $22 shipped
7 1/2” x 18” $32 shipped
8” x 10” $29 shipped
8” x 12” $37 shipped
17” x 20” $50 shipped

Let me know what you need, I also have a decent front panel for $50 plus shipping.

**70STOVEBOLT** · 10-29-2017, 01:24 PM

To the top one more time. Going to have to scrap what’s left soon, no inside storage available and the snow will be flying before we know it.

**70STOVEBOLT** · 01-04-2018, 06:09 PM

Quote:

Originally Posted by 70STOVEBOLT

Sizes that are left are:

3” x 24” $27 shipped
4” x 16” $22 shipped
7 1/2” x 18” $32 shipped
8” x 10” $29 shipped
8” x 12” $37 shipped
17” x 20” $50 shipped

Let me know what you need, I also have a decent front panel for $50 plus shipping.

Still have the sizes above left. Good, solid metal.

**70STOVEBOLT** · 01-20-2018, 01:07 PM

Quote:

Originally Posted by 70STOVEBOLT

Sizes that are left are:

3” x 24” $27 shipped
4” x 16” $22 shipped
7 1/2” x 18” $32 shipped
8” x 10” $29 shipped
8” x 12” $37 shipped
17” x 20” $50 shipped

Let me know what you need, I also have a decent front panel for $50 plus shipping.

Still have the sizes above.

**70STOVEBOLT** · 05-01-2018, 04:36 PM

I don't want to scrap the rest of this bed, but I gotta get my yard cleaned up. Anybody need any patches? I have bedsides too, and the front panel. The bedsides have rust through in the usual areas, but the front panel is good except for some areas along the bottom mounting flange.

**70STOVEBOLT** · 05-31-2018, 02:08 PM

Last time on this, cutting up the remainder this weekend, got a HS grad party for my son on June 16th and the wife says it has to be gone by then.

tallbob · 12-11-2018, 08:43 PM

Hey Mark,
I could use one more rear section panel if you have any of these left?
Thanks, Bob

**70STOVEBOLT** · 12-11-2018, 10:31 PM

Bob, I only have one piece left. I can get a pic tomorrow. I think it is a middle piece, but I believe it has a brace on it.

tallbob · 01-08-2019, 11:18 PM

Mark,
Any luck on finding that rear bed floor patch panel?
Thanks, Bob

**70STOVEBOLT** · 01-08-2019, 11:37 PM

Bob, I apologize for leaving you hanging, here are pics of the piece I have left.

tallbob · 01-09-2019, 03:13 PM

Mark,
Thanks for getting back to me. Unfortunately that piece will not work. I will have to keep searching. Thanks again.

**70STOVEBOLT** · 01-09-2019, 03:16 PM

No problem, good luck, I think Gary IRONHORSE has some for sale too.

**70STOVEBOLT** · 05-14-2019, 05:22 PM

Still have one left

'69 Gmc · 05-16-2019, 12:55 AM

I could use a piece to patch these holes
Posted via Mobile Device

**70STOVEBOLT** · 05-16-2019, 07:45 AM

I don't know if the piece I have would work. Looks like that is at the front of the bed?

'69 Gmc · 05-16-2019, 08:53 AM

Quote:

Originally Posted by 70STOVEBOLT

I don't know if the piece I have would work. Looks like that is at the front of the bed?

Rear of the bed. Behind the driver wheel tub. I’d like to think I can make two small pieces of any flat ribbed section work for those patches
Posted via Mobile Device

**70STOVEBOLT** · 05-16-2019, 08:55 AM

Let me know what size(s) you need. The one piece I have left is about 18 x 18.

**70STOVEBOLT** · 05-25-2020, 05:43 PM

Once more

**70STOVEBOLT** · 06-17-2020, 01:42 PM

Midweek bump

**70STOVEBOLT** · 02-10-2021, 06:01 PM

Still have one piece, approximately 18" x 18" solid OEM steel.

**70STOVEBOLT** · 03-12-2021, 05:52 PM

Can get pics of the piece I have left if anyone is interested.

10-03-2017, 10:00 PM	#52
jessemthompson Registered User Join Date: Nov 2011 Location: Williamsburg, VA Posts: 955	Re: Fleetside bed floor patch panels Sounds good. Pm me your PayPal address please

10-07-2017, 09:50 PM	#53
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels Bob and Jesse I have your panels cut. I will ship on Monday. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

10-07-2017, 09:52 PM	#54
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels I have other panels available if anyone else needs any. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

10-11-2017, 06:43 PM	#55
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels Sizes that are left are: 3” x 24” $27 shipped 4” x 16” $22 shipped 7 1/2” x 18” $32 shipped 8” x 10” $29 shipped 8” x 12” $37 shipped 17” x 20” $50 shipped Let me know what you need, I also have a decent front panel for $50 plus shipping. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

10-29-2017, 01:24 PM	#56
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels To the top one more time. Going to have to scrap what’s left soon, no inside storage available and the snow will be flying before we know it. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

05-01-2018, 04:36 PM	#59
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels I don't want to scrap the rest of this bed, but I gotta get my yard cleaned up. Anybody need any patches? I have bedsides too, and the front panel. The bedsides have rust through in the usual areas, but the front panel is good except for some areas along the bottom mounting flange. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

05-31-2018, 02:08 PM	#60
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels Last time on this, cutting up the remainder this weekend, got a HS grad party for my son on June 16th and the wife says it has to be gone by then. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

12-11-2018, 08:43 PM	#61
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Fleetside bed floor patch panels Hey Mark, I could use one more rear section panel if you have any of these left? Thanks, Bob

12-11-2018, 10:31 PM	#62
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels Bob, I only have one piece left. I can get a pic tomorrow. I think it is a middle piece, but I believe it has a brace on it. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

01-08-2019, 11:18 PM	#63
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Fleetside bed floor patch panels Mark, Any luck on finding that rear bed floor patch panel? Thanks, Bob

01-08-2019, 11:37 PM	#64
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels Bob, I apologize for leaving you hanging, here are pics of the piece I have left. Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

01-09-2019, 03:13 PM	#65
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Fleetside bed floor patch panels Mark, Thanks for getting back to me. Unfortunately that piece will not work. I will have to keep searching. Thanks again.

01-09-2019, 03:16 PM	#66
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels No problem, good luck, I think Gary IRONHORSE has some for sale too. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

05-14-2019, 05:22 PM	#67
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels Still have one left __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

05-16-2019, 12:55 AM	#68
'69 Gmc Registered User Join Date: Feb 2016 Location: Columbia TN Posts: 145	I could use a piece to patch these holes Posted via Mobile Device Attached Images



Register or Log In To remove these advertisements.

05-16-2019, 07:45 AM	#69
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels I don't know if the piece I have would work. Looks like that is at the front of the bed? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

05-16-2019, 08:55 AM	#71
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels Let me know what size(s) you need. The one piece I have left is about 18 x 18. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

05-25-2020, 05:43 PM	#72
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels Once more __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

06-17-2020, 01:42 PM	#73
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels Midweek bump __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

02-10-2021, 06:01 PM	#74
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels Still have one piece, approximately 18" x 18" solid OEM steel. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

03-12-2021, 05:52 PM	#75
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Fleetside bed floor patch panels Can get pics of the piece I have left if anyone is interested. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

Register or Log In To remove these advertisements.