Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-06-2017, 02:15 PM | #1 |
Registered User
Join Date: Mar 2009
Location: salt lake city, utah
Posts: 208
|
NV4500/NP205 AA kit t-case shift bracket done different
I have a '94 NV and a 10 spline 205 going into a '77 K5 with a roller cam 355. I ordered the adapter kit from AA, but didn't like the AA shift linkage bracket for a couple reasons.
I wasn't excited about this. I can't remember, but there was something weird with shift linkage alignment. Mostly I didn't want the shifter boots to overlap. So I got this from AA (PN#920001) ...and modified it to do this: After this pic was taken I replaced the Clevis pin in the t-case end of the heim joint with a 3/8 bolt. Also located it under the shift bracket for better alignment and easier access to the zerk. I'll post more pics later when it's finished. Anyone see anything wrong with this set up?
__________________
'80 SRW C35 - 355/700R4/4:11/2.5-3/DD '77 Cheyenne K5 - Roller cam 355/NV4500/205/4:88's/35's/DD rust repair on the '77 http://67-72chevytrucks.com/vboard/s...d.php?t=740291 |
11-06-2017, 03:41 PM | #2 |
Post Whore
Join Date: May 2015
Location: Alabama
Posts: 14,590
|
Re: NV4500/NP205 AA kit t-case shift bracket done different
looks good...
|
11-07-2017, 12:02 AM | #3 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: NV4500/NP205 AA kit t-case shift bracket done different
I would put a jamb nut on the heim joint to clevis connection. Other than that, looks like it should work good.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
11-08-2017, 07:27 PM | #4 |
Senior Member
Join Date: Sep 2016
Location: Garnett, Kansas
Posts: 279
|
Re: NV4500/NP205 AA kit t-case shift bracket done different
Very excited to see this; this is the first 67-72 truck I've seen with the NV4500 conversion. Are you happy with the new shifter location? Are you using a stock GM shift lever or the AA shift lever? Are you using a driver side slave cylinder for your clutch, or did you go with an mechanical clutch linkage?
|
11-09-2017, 10:38 AM | #5 | |
Registered User
Join Date: Mar 2009
Location: salt lake city, utah
Posts: 208
|
Re: NV4500/NP205 AA kit t-case shift bracket done different
Quote:
__________________
'80 SRW C35 - 355/700R4/4:11/2.5-3/DD '77 Cheyenne K5 - Roller cam 355/NV4500/205/4:88's/35's/DD rust repair on the '77 http://67-72chevytrucks.com/vboard/s...d.php?t=740291 |
|
11-09-2017, 11:29 PM | #6 |
Registered User
Join Date: Jun 2013
Location: Somewhere
Posts: 3,052
|
Re: NV4500/NP205 AA kit t-case shift bracket done different
Interesting. I've gathered the parts to do a similar swap in my 72 with the addition of a planetary range box. A PO swapped the 205 for a 208 for the lower low. I have a number of shifters and figure I'll need to fab a bracket and linkage.
|
Bookmarks |
|
|