Frame holes are elongated where shocks connect - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chuckin · 03-01-2014, 12:48 PM

Hey guys.
I am guessing my 68 was used for off roading in the past. The shock holes in the frame are now oval. I am planning on welding them back to round. I am guessing I should weld from the top down???? The off roading caused the shocks to jam upwards and push the holes upwards??? Any suggestions on how to fix this to make them round again would really held. I'm a total noob.
Thanks
Picture is sideways, so turn your heads left.

Chuckin · 03-01-2014, 12:52 PM

And also, there are hairline cracks going outward here, so this frame was definitely under some serious stress here.

LONGHAIR · 03-01-2014, 08:17 PM

That is very common in all of these trucks, because the mounts are "single shear".
I have fixed dozens of them with various methods. This includes a simple weld to the oblong edge for minor wear and going as far as welding thick washers in place inside the frame. This gives some back-up for any cracks that may have developed too.

Chuckin · 03-01-2014, 08:22 PM

Do you have an idea as to which edge is the "oblong edge"? The top or bottome of the hole? Or does it even matter?

LONGHAIR · 03-01-2014, 09:09 PM

As a bad as that is, I wouldn't worry about it. I would go for somewhat centered and call it good. It's not a precision thing anyway.

**LEEVON** · 03-01-2014, 09:32 PM

I would find a thick washer, weld it in then get CPP's shock mount support tabs:

http://image.customclassictrucks.com...d-to-frame.jpg

calvin78612 · 03-01-2014, 09:38 PM

I would stop drill the crack also,but that's just me.

OESMAN · 03-02-2014, 12:38 AM

Try this link, maybe it would work for you.
http://67-72chevytrucks.com/vboard/s...d.php?t=516508

Chuckin · 03-02-2014, 08:06 PM

Thanks guys and great info! I like those cpp brackets....

chevy_mike · 03-03-2014, 12:03 AM

CPP brackets work great. Have installed them on two trucks.

03-01-2014, 12:48 PM	#1
Chuckin Registered User Join Date: Feb 2014 Location: Fresno, CA Posts: 33	Frame holes are elongated where shocks connect Hey guys. I am guessing my 68 was used for off roading in the past. The shock holes in the frame are now oval. I am planning on welding them back to round. I am guessing I should weld from the top down???? The off roading caused the shocks to jam upwards and push the holes upwards??? Any suggestions on how to fix this to make them round again would really held. I'm a total noob. Thanks Picture is sideways, so turn your heads left. Attached Images __________________ "Growing old is mandatory, Growing up is optional" Chuckin - 68 Build Thread

03-01-2014, 12:52 PM	#2
Chuckin Registered User Join Date: Feb 2014 Location: Fresno, CA Posts: 33	Re: Frame holes are elongated where shocks connect And also, there are hairline cracks going outward here, so this frame was definitely under some serious stress here. __________________ "Growing old is mandatory, Growing up is optional" Chuckin - 68 Build Thread

03-01-2014, 08:22 PM	#4
Chuckin Registered User Join Date: Feb 2014 Location: Fresno, CA Posts: 33	Re: Frame holes are elongated where shocks connect Do you have an idea as to which edge is the "oblong edge"? The top or bottome of the hole? Or does it even matter? __________________ "Growing old is mandatory, Growing up is optional" Chuckin - 68 Build Thread

03-01-2014, 09:32 PM	#6
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: Frame holes are elongated where shocks connect I would find a thick washer, weld it in then get CPP's shock mount support tabs: http://image.customclassictrucks.com...d-to-frame.jpg __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

03-01-2014, 09:38 PM	#7
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 802	Re: Frame holes are elongated where shocks connect I would stop drill the crack also,but that's just me. __________________ 84 step side 87 swb

03-02-2014, 12:38 AM	#8
OESMAN Registered User Join Date: Nov 2013 Location: WI Posts: 18	Re: Frame holes are elongated where shocks connect Try this link, maybe it would work for you. http://67-72chevytrucks.com/vboard/s...d.php?t=516508

03-02-2014, 08:06 PM	#9
Chuckin Registered User Join Date: Feb 2014 Location: Fresno, CA Posts: 33	Re: Frame holes are elongated where shocks connect Thanks guys and great info! I like those cpp brackets.... __________________ "Growing old is mandatory, Growing up is optional" Chuckin - 68 Build Thread

03-03-2014, 12:03 AM	#10
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Frame holes are elongated where shocks connect CPP brackets work great. Have installed them on two trucks. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.