here's my truck 65 c20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Budman56 · 09-07-2011, 04:42 PM

what do you think?

**Clyde65** · 09-07-2011, 05:29 PM

Heck of a change man, looks great!

oh and did you realize the 2nd and 3rd and 4th picture your missing some body parts? just asking.

gimmy 64 · 09-07-2011, 05:46 PM

looks good. are you leaving it 3/4 ton any suspension changes? we are almost nieghbors i'm in menifee

**Captainfab** · 09-08-2011, 12:01 AM

Welcome to the forum

You don't mess around, do you? Is the frame powder coated or liquid paint? Are you upgrading the suspension and brakes? Looks good.

Chvyman1975 · 09-08-2011, 12:21 AM

Looking good neighbor. Its going to be sweet in the end. Remember, you doing yours to that level was my motivation to not take mine that far....lol. But all BS aside its going to be one sweet ride when your done.

Budman56 · 09-08-2011, 09:37 AM

ya I forgot to take more photos when I tore it appart.

Budman56 · 09-08-2011, 09:37 AM

no changes, just going to leave it orginal.

Budman56 · 09-08-2011, 09:39 AM

yep in a hurry to drive it, and its powder coating, i found a really cheap place to have it done.

**LostMy65** · 09-08-2011, 10:23 AM

Quote:

Originally Posted by Budman56

no changes, just going to leave it orginal.

The Original Rare Blue frame.

Welcome.

Look forward to seeing your progress.
Posted via Mobile Device

**LostMy65** · 09-08-2011, 10:28 AM

Off Topic....

I almost forgot about good Ol' BudMan.
I had a T-Shirt with BudMan on it.

Posted via Mobile Device

**Chevy Fleetside** · 09-08-2011, 10:54 AM

so where is this powder coater and how much was the frame?
You have to share man...

**tazattitude** · 09-08-2011, 11:12 AM

Looking great. Sharp looking blue!!! Going to do a two tone on it? Blue and white? Maybe a white pearl (blue tinted pearl over the white would be sharp)

Are you building it in your drive-way, or did you move it out there?

Bears63 · 09-08-2011, 11:43 AM

Quote:

Originally Posted by Budman56

no changes, just going to leave it orginal.

Good man!! That does me good to hear another person leaving a 3/4 ton as a 3/4 ton. Like the frame, but I have to ask, is there a particular reason you chose to do it blue? Curious is all.

Budman56 · 09-09-2011, 09:00 AM

long story short, i was going to paint it my self, but when i got the price to sand blast it, $150 an hour with a 2 hr min. then i would have to spend another $100 or so to buy and prep for the paint it would have cost me too much to do, so my wife suggested that i look into powder coating, but i told her it would cost too much to do. so anyway i decided to check on some price. and wow i was right, i got prices all the way to $1000. to powder coat the frame. but my last call to a company called seven's powder coating in riverside he quoted me $400 to sand blast and powder coat any color i wanted as long as it was a stock color. so i was headed down there to drop off the frame when i decided that i was going to do it in red. but when i got there i seen this blue and just had to have it instead of the red. i have also had just about every thing else i could think of powder coated and im just waiting to get it all bolted back on then i will post more pics of it.

Budman56 · 09-09-2011, 09:03 AM

yep i like the 3/4 ton truck, and thats why i bought it. i will be driving this daily when its all finished thats why i tore it all down to completely rebuild it so that i wouldnt have any problems with it after i rebuilt everything. after my problems with my f250 diesel i just didnt want to have any more car payment and i can work on this my self with out having to pay a mechanic.

8door · 09-09-2011, 02:31 PM

I just got a quote from those guys today,to powder coat rims.
Are you happy with their job ?

Budman56 · 09-09-2011, 02:36 PM

Quote:

Originally Posted by 8door

I just got a quote from those guys today,to powder coat rims.
Are you happy with their job ?

very happy and their good guys and they turn it around quick.

what did they quote you on your rims?

8door · 09-09-2011, 04:29 PM

Quote:

Originally Posted by Budman56

very happy and their good guys and they turn it around quick.

what did they quote you on your rims?

$150 for 4 rims.
I'm in Riverside so their close by.
Like what you doing to your truck.Mine also will be stock
and a daily.

Budman56 · 09-10-2011, 09:01 PM

update for this weekend, installed front clip, started the first of the wiring loom kits for the front clip. also got back my swing arms from the powder coating and install them on the truck, also stopped by cpp to pick up the front ball joint repair kit just to get this morning to try to install the front a-arms and found out that the kit was for a c10. so I had to go to anahiem to exchange the parts for the correct c20 parts just to have the salesman convince my wife that it would be better to up grade my front brakes to disc. well needless to say i was all for that until i found out how much it was going to cost, but i think im still going to do it anyway. what the hell its only money and i cant take it to the grave.......right??? well any way here are more photos of my truck and its progress.

Turkey · 09-10-2011, 09:07 PM

Nice! Looks great for a Gator fan!

factorystock · 09-11-2011, 01:33 PM

How is the clearance between auto trans and the original manual trans bell housing crossmember? I have heard most say it needs to be removed when there is a manual to auto swap.

Slowtruk · 09-11-2011, 01:41 PM

subscribed, nice looking build!

**Captainfab** · 09-12-2011, 12:23 AM

I agree. There is absolutely no reason for the bellhousing crossmember to be there. It is just in the way IMO. The factory auto trucks did not have that crossmember in there.

Quote:

Originally Posted by factorystock

How is the clearance between auto trans and the original manual trans bell housing crossmember? I have heard most say it needs to be removed when there is a manual to auto swap.

Budman56 · 09-12-2011, 08:20 AM

Quote:

Originally Posted by factorystock

How is the clearance between auto trans and the original manual trans bell housing crossmember? I have heard most say it needs to be removed when there is a manual to auto swap.

Yep didn't need to be there, but I don't like removing things that could be structural and there was no clearance issue with leaving it. but I did grind the rivets and replace with bolts so it could be removed easly.

Posted via Mobile Device

kieth · 09-12-2011, 09:04 AM

Budman 56, check into purchasing replacement hubs and rotors mine new were only $32.00 each and new disc brake calipers were on 18.00 each. I do not think this conversion to discs has to be so expensive.........Kieth (in your case the only question would be the diameter of the axle shafts etc. Ask Captain Fab he can give you more details. Nice looking build.....Kieth

09-07-2011, 04:42 PM	#1
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	My (BUDMAN56) 65 C20 GROUND UP RESTORATION what do you think? Attached Images Last edited by Budman56; 06-11-2013 at 12:28 PM.

09-07-2011, 05:29 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: here's my truck 65 c20 Heck of a change man, looks great! oh and did you realize the 2nd and 3rd and 4th picture your missing some body parts? just asking. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

09-07-2011, 05:46 PM	#3
gimmy 64 Registered User Join Date: Sep 2009 Location: menifee california Posts: 788	Re: here's my truck 65 c20 looks good. are you leaving it 3/4 ton any suspension changes? we are almost nieghbors i'm in menifee

09-08-2011, 12:01 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: here's my truck 65 c20 Welcome to the forum You don't mess around, do you? Is the frame powder coated or liquid paint? Are you upgrading the suspension and brakes? Looks good. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-08-2011, 12:21 AM	#5
Chvyman1975 Registered User Join Date: Feb 2007 Location: Winchester, CA Posts: 128	Re: here's my truck 65 c20 Looking good neighbor. Its going to be sweet in the end. Remember, you doing yours to that level was my motivation to not take mine that far....lol. But all BS aside its going to be one sweet ride when your done.

09-08-2011, 09:37 AM	#6
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: here's my truck 65 c20 ya I forgot to take more photos when I tore it appart.

09-08-2011, 09:37 AM	#7
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: here's my truck 65 c20 no changes, just going to leave it orginal.

09-08-2011, 09:39 AM	#8
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: here's my truck 65 c20 yep in a hurry to drive it, and its powder coating, i found a really cheap place to have it done.

09-08-2011, 10:28 AM	#10
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,468	Re: here's my truck 65 c20 Off Topic.... I almost forgot about good Ol' BudMan. I had a T-Shirt with BudMan on it. Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

09-08-2011, 10:54 AM	#11
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,775	Re: here's my truck 65 c20 so where is this powder coater and how much was the frame? You have to share man... __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

09-08-2011, 11:12 AM	#12
tazattitude Senior Member Join Date: Oct 2010 Location: Largo, FL Posts: 532	Re: here's my truck 65 c20 Looking great. Sharp looking blue!!! Going to do a two tone on it? Blue and white? Maybe a white pearl (blue tinted pearl over the white would be sharp) Are you building it in your drive-way, or did you move it out there? __________________ TAZ BUILDS 1966 GMC Suburban 1963 GMC Suburban Patina frame-on FOR Sale 1966 C10 Short Bed (2010-11) Monthly Updates 2015 C10 Pics with my '72 Montego GT 429/521 build 1963 Pro Street C10 back halved. Frame off I did back in 1990 Pics / Video

09-09-2011, 09:00 AM	#14
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: here's my truck 65 c20 long story short, i was going to paint it my self, but when i got the price to sand blast it, $150 an hour with a 2 hr min. then i would have to spend another $100 or so to buy and prep for the paint it would have cost me too much to do, so my wife suggested that i look into powder coating, but i told her it would cost too much to do. so anyway i decided to check on some price. and wow i was right, i got prices all the way to $1000. to powder coat the frame. but my last call to a company called seven's powder coating in riverside he quoted me $400 to sand blast and powder coat any color i wanted as long as it was a stock color. so i was headed down there to drop off the frame when i decided that i was going to do it in red. but when i got there i seen this blue and just had to have it instead of the red. i have also had just about every thing else i could think of powder coated and im just waiting to get it all bolted back on then i will post more pics of it.

09-09-2011, 09:03 AM	#15
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: here's my truck 65 c20 yep i like the 3/4 ton truck, and thats why i bought it. i will be driving this daily when its all finished thats why i tore it all down to completely rebuild it so that i wouldnt have any problems with it after i rebuilt everything. after my problems with my f250 diesel i just didnt want to have any more car payment and i can work on this my self with out having to pay a mechanic.

09-09-2011, 02:31 PM	#16
8door Not too old to learn Join Date: Mar 2004 Location: SoCal Posts: 617	Re: here's my truck 65 c20 I just got a quote from those guys today,to powder coat rims. Are you happy with their job ? __________________ 1968 C10 a way to long restoration.

09-10-2011, 09:01 PM	#19
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: here's my truck 65 c20 update for this weekend, installed front clip, started the first of the wiring loom kits for the front clip. also got back my swing arms from the powder coating and install them on the truck, also stopped by cpp to pick up the front ball joint repair kit just to get this morning to try to install the front a-arms and found out that the kit was for a c10. so I had to go to anahiem to exchange the parts for the correct c20 parts just to have the salesman convince my wife that it would be better to up grade my front brakes to disc. well needless to say i was all for that until i found out how much it was going to cost, but i think im still going to do it anyway. what the hell its only money and i cant take it to the grave.......right??? well any way here are more photos of my truck and its progress. Attached Images Last edited by Budman56; 09-10-2011 at 09:11 PM.



Register or Log In To remove these advertisements.

09-10-2011, 09:07 PM	#20
Turkey Registered User Join Date: Dec 2009 Location: Orlando, Florida Posts: 427	Re: here's my truck 65 c20 Nice! Looks great for a Gator fan! __________________

09-11-2011, 01:33 PM	#21
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,353	Re: here's my truck 65 c20 How is the clearance between auto trans and the original manual trans bell housing crossmember? I have heard most say it needs to be removed when there is a manual to auto swap.

09-11-2011, 01:41 PM	#22
Slowtruk Registered User Join Date: Aug 2011 Location: Lumberton Texas Posts: 378	Re: here's my truck 65 c20 subscribed, nice looking build! __________________ IBEW Electrician-Nick 1985 C20 Silverado 1965 C-10 short fleet 1961 c-10 Apache short fleet 2005 Chevy Suburban LT 2012 Hyundai Sonata

09-12-2011, 09:04 AM	#25
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: here's my truck 65 c20 Budman 56, check into purchasing replacement hubs and rotors mine new were only $32.00 each and new disc brake calipers were on 18.00 each. I do not think this conversion to discs has to be so expensive.........Kieth (in your case the only question would be the diameter of the axle shafts etc. Ask Captain Fab he can give you more details. Nice looking build.....Kieth

Register or Log In To remove these advertisements.