The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-04-2019, 10:00 PM   #1
coreyslude
Registered User
 
Join Date: Jan 2010
Location: knoxville TN
Posts: 22
67 c10 with 76 disc brake swap, what inner tie rods?

I have a 67 c10 2wd with original crossmember with 76 upper and lower control arms, spindles, and ball joints installed. Any reason I can't use the 76 inner and outer tie rods with the 76 center link? Looking to buy new tie rods to finish steering and all I found was use the outers that match the spindles. Any help is appreciated
coreyslude is offline   Reply With Quote
Old 08-05-2019, 04:07 PM   #2
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,894
Re: 67 c10 with 76 disc brake swap, what inner tie rods?

You should be fine w/the 76 TRE's & center-link. You just need a Pitman arm to match the type of steering (power or manual) & verify the idler matches the center-link as far as the joint taper.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 08-05-2019, 04:49 PM   #3
coreyslude
Registered User
 
Join Date: Jan 2010
Location: knoxville TN
Posts: 22
Re: 67 c10 with 76 disc brake swap, what inner tie rods?

That's what I was thinking. Thanks for the response
coreyslude is offline   Reply With Quote
Old 08-05-2019, 05:58 PM   #4
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,894
Re: 67 c10 with 76 disc brake swap, what inner tie rods?

I did several back in the day w/the 71/72 drag link. I'm fairly comfortable saying the 73-80 drag link works as well.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com