Panel truck gas cap

[Ratman74]

I have a 65 C10 panel and I have 2 Questions for the panel truck guys:

1. Do you have a vented gas cap?
2. Does anybody make the fuel hose to run from the filler neck to the tank?

[Captainfab]

The Suburban is exactly the same as a Panel.

1) Yes I do believe I have a vented gas cap on my '66 Suburban.
2) The hose is just a straight piece of fuel filler hose for both the filler tube and the vent. The filler tube has the necessary bends in it.

[Llay R. Rac]

My 65 suburban has a vented gas cap.
I just replaced the filler hose, its 1 3/8 inch inner diameter, 4 inches long.
a well supplied parts place should have some, its also available online but i found you had to buy a foot.

[Ratman74]

Originally Posted by Captainfab

The Suburban is exactly the same as a Panel.

1) Yes I do believe I have a vented gas cap on my '66 Suburban.
2) The hose is just a straight piece of fuel filler hose for both the filler tube and the vent. The filler tube has the necessary bends in it.

Originally Posted by Llay R. Rac

My 65 suburban has a vented gas cap.
I just replaced the filler hose, its 1 3/8 inch inner diameter, 4 inches long.
a well supplied parts place should have some, its also available online but i found you had to buy a foot.

Thanks guys, my I thought it was the case. My panel has a standard cap and it kept "burping" fuel after a drive. I figured it was over pressurizing the tank, so I drove it the other day in semi-locked and no fuel leaks.

I have to replace the filler hose, mine has a severe kink in it. When filling I have to stop every half gallon, so it doesn't overflow.