|
06-17-2019, 06:50 PM
|
#1 |
|
Registered User
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
|
exhaust system
Can this be done? I am going to install an exhaust system on my project truck. I have headman headers on it, it looks like 2 inch opening at the collectors. So I would get exhaust tubing 2 inch ??. Now the mufflers I got are Flow Masters 2 1/2 inch in and 2 1/2 out. CAN I expand the 2 inch tubing at the muffler 2 1/2 in and expand the tubing out to 2 1/2 inches??? So can I get an extra 1/2 inch to fit the mufflers? Then continue with the 2 inch tubing to the tail. Any other questions please ask me. John
__________________
Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in. |
|
|
| Bookmarks |
|
|
Threaded Mode