CT 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Patsfan34 · 02-03-2010, 09:19 AM

PM sent

Patsfan34 · 03-02-2010, 09:24 PM

Ok so this thing is still sitting in my garage. Come and get it PLEASE!!!

Patsfan34 · 03-03-2010, 09:00 AM

^^^

Patsfan34 · 03-04-2010, 09:31 AM

to the top

TwoFiftyShifter · 03-04-2010, 10:30 AM

I'll take it for free Neil, anytime

Patsfan34 · 03-04-2010, 11:01 AM

I'm sure many would take it for free. Worse case scenario is I hold onto it for another project way down the road.

Patsfan34 · 03-05-2010, 12:10 PM

^^^

Patsfan34 · 03-06-2010, 10:20 AM

^^^

Patsfan34 · 03-07-2010, 09:02 AM

and again!

Patsfan34 · 03-08-2010, 09:16 AM

bump

Patsfan34 · 03-25-2010, 10:44 AM

Also still available

dabruce15 · 03-25-2010, 04:47 PM

Is that the offset air cleaner for trucks with power brakes?

Patsfan34 · 03-25-2010, 04:55 PM

I have no idea.

Patsfan34 · 03-26-2010, 05:02 PM

Bam

**425HP409** · 03-26-2010, 06:29 PM

I would like the air cleaner and air cleaner riser with the breather hose if you would sell it.

Patsfan34 · 04-01-2010, 04:41 PM

Still available. 425HP409 I decided not to part it out because I'm sure someday if I still have this engine I'll put it in something and will need it complete.

young_buck_hick · 04-03-2010, 03:23 PM

what about the tranmision shifter set up

Capt Kurt · 04-13-2010, 11:20 PM

Hello from FLA.
I need the alternator and the power stering brackets also the fly wheel cover and the air cleaner and the tower asap ILL pay for shipping
How Much are you asking for the crank shaft I might want that too. Capt. Kurt

Patsfan34 · 04-14-2010, 07:16 AM

Sorry boys I'm selling this 292 complete.

hubert hefner · 04-19-2010, 12:09 PM

do you still have the motor mounts and stuff or are they gone?

Patsfan34 · 04-19-2010, 03:20 PM

Still have it all. Mounts,towers and fabbed crossmember all go with the motor unless the buyer already has that stuff and then I'll seperate it.

69oldog · 04-26-2010, 02:26 PM

I'll give you 150 for it.?

Patsfan34 · 05-04-2010, 05:33 PM

Still available. 69oldog's plans changed so he decided he no longer wanted it.

Patsfan34 · 05-06-2010, 04:52 PM

Come get it. I will shortly be pulling a TH350 with a shift kit that will bolt directly to this engine. Would make a sweet combo once the 292 was rebuilt. I got my ears on!

Patsfan34 · 07-19-2010, 08:35 PM

Ok engine still available. Tranny already sold to someone local.

02-03-2010, 09:19 AM	#51
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust PM sent

03-02-2010, 09:24 PM	#52
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust Ok so this thing is still sitting in my garage. Come and get it PLEASE!!!

03-03-2010, 09:00 AM	#53
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust ^^^

03-04-2010, 09:31 AM	#54
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust to the top

03-04-2010, 10:30 AM	#55
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust I'll take it for free Neil, anytime __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

03-04-2010, 11:01 AM	#56
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust I'm sure many would take it for free. Worse case scenario is I hold onto it for another project way down the road.

03-05-2010, 12:10 PM	#57
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust ^^^

03-06-2010, 10:20 AM	#58
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust ^^^

03-07-2010, 09:02 AM	#59
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust and again!

03-08-2010, 09:16 AM	#60
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust bump

03-25-2010, 10:44 AM	#61
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust Also still available

03-25-2010, 04:47 PM	#62
dabruce15 Registered User Join Date: Mar 2009 Location: Chatsworth, CA Posts: 236	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust Is that the offset air cleaner for trucks with power brakes? __________________ Beauty is in the eye of the beer-holder. Praise the lowered!

03-25-2010, 04:55 PM	#63
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust I have no idea.

03-26-2010, 05:02 PM	#64
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust Bam

03-26-2010, 06:29 PM	#65
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 834	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust I would like the air cleaner and air cleaner riser with the breather hose if you would sell it. __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette



Register or Log In To remove these advertisements.

04-01-2010, 04:41 PM	#66
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust Still available. 425HP409 I decided not to part it out because I'm sure someday if I still have this engine I'll put it in something and will need it complete.

04-03-2010, 03:23 PM	#67
young_buck_hick Registered User Join Date: Sep 2009 Location: boca raton fl Posts: 21	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust what about the tranmision shifter set up

04-13-2010, 11:20 PM	#68
Capt Kurt Registered User Join Date: Apr 2010 Location: fort myers fl Posts: 15	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust Hello from FLA. I need the alternator and the power stering brackets also the fly wheel cover and the air cleaner and the tower asap ILL pay for shipping How Much are you asking for the crank shaft I might want that too. Capt. Kurt

04-14-2010, 07:16 AM	#69
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust Sorry boys I'm selling this 292 complete.

04-19-2010, 12:09 PM	#70
hubert hefner Registered User Join Date: Apr 2010 Location: rochester, in Posts: 31	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust do you still have the motor mounts and stuff or are they gone?

04-19-2010, 03:20 PM	#71
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust Still have it all. Mounts,towers and fabbed crossmember all go with the motor unless the buyer already has that stuff and then I'll seperate it.

04-26-2010, 02:26 PM	#72
69oldog Registered User Join Date: Jan 2010 Location: Guilford,CT Posts: 41	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust I'll give you 150 for it.?

05-04-2010, 05:33 PM	#73
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust Still available. 69oldog's plans changed so he decided he no longer wanted it.

05-06-2010, 04:52 PM	#74
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust Come get it. I will shortly be pulling a TH350 with a shift kit that will bolt directly to this engine. Would make a sweet combo once the 292 was rebuilt. I got my ears on!

07-19-2010, 08:35 PM	#75
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 292 (6 Cylinder) Engine/Split exhaust manifolds/complete exhaust Ok engine still available. Tranny already sold to someone local.

Register or Log In To remove these advertisements.