WTB burban soild side glass - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kdrodworks316 · 07-11-2008, 11:23 PM

I need front solid side glass for my burban. I have a full set of sliders I would trade or will paypal. I need them asap and cheap as possable. My budget for this rust bucket is gone.

soba_03 · 07-12-2008, 07:14 AM

I talked to a Glass guy here in town and he has said that on a few of these they have just had glass cut for the side windows. When I asked about it he made it seem like it wasn't a huge deal. Might check with local glass shop. Are your sliders bad?

kdrodworks316 · 07-12-2008, 11:56 PM

My sliders are ok, little rusty in the channels and no latches, but not to bad. I just want the cleaner look of solid glass. you need some sliders?

soba_03 · 07-13-2008, 12:53 AM

I hope I don't.... I mean I haven't pulled them yet... I got way to much going on with it right now to change direction for the 121st time.....So that will be comming in the future. Stick them in Hiding and I'll get a hold of you whem I pull mine...LOL

I would hope that with only 42999 actual miles that they aren't to bad... I know that the seals and felts are shot.. and the seals (the right seals) only place that I've found they at this point have been Steele and they want 500 for the 4 seals not felts but just seals... So I'm on a holding pattern till I get ready to paint inside and out.. It's going to be a while...

kdrodworks316 · 07-13-2008, 01:48 AM

consider them hidin.

kdrodworks316 · 07-15-2008, 12:58 AM

ttt

**Captainfab** · 07-15-2008, 04:55 PM

I'm not sure if they put solid glass in the front from the factory. The only ones I've seen are in the rear.

kdrodworks316 · 07-15-2008, 09:23 PM

Yes they did, It was offered in many combos of slider/slider, solid/solid, slider/solid, solid/slider. I may have the rears cut down to fit.

07-11-2008, 11:23 PM	#1
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	WTB burban soild side glass I need front solid side glass for my burban. I have a full set of sliders I would trade or will paypal. I need them asap and cheap as possable. My budget for this rust bucket is gone.

07-12-2008, 07:14 AM	#2
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 561	Re: WTB burban soild side glass I talked to a Glass guy here in town and he has said that on a few of these they have just had glass cut for the side windows. When I asked about it he made it seem like it wasn't a huge deal. Might check with local glass shop. Are your sliders bad?

07-12-2008, 11:56 PM	#3
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: WTB burban soild side glass My sliders are ok, little rusty in the channels and no latches, but not to bad. I just want the cleaner look of solid glass. you need some sliders?

07-13-2008, 12:53 AM	#4
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 561	Re: WTB burban soild side glass I hope I don't.... I mean I haven't pulled them yet... I got way to much going on with it right now to change direction for the 121st time.....So that will be comming in the future. Stick them in Hiding and I'll get a hold of you whem I pull mine...LOL I would hope that with only 42999 actual miles that they aren't to bad... I know that the seals and felts are shot.. and the seals (the right seals) only place that I've found they at this point have been Steele and they want 500 for the 4 seals not felts but just seals... So I'm on a holding pattern till I get ready to paint inside and out.. It's going to be a while...

07-13-2008, 01:48 AM	#5
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: WTB burban soild side glass consider them hidin.

07-15-2008, 12:58 AM	#6
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: WTB burban soild side glass ttt __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231

07-15-2008, 04:55 PM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: WTB burban soild side glass I'm not sure if they put solid glass in the front from the factory. The only ones I've seen are in the rear. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-15-2008, 09:23 PM	#8
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: WTB burban soild side glass Yes they did, It was offered in many combos of slider/slider, solid/solid, slider/solid, solid/slider. I may have the rears cut down to fit. __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.