1966 inside sun visor

[Black Momba]

I have a 1966 C10 big window,short bed. I can’t find the hooks were the visors go into until you need them. I installed the new sun visors, but they move around. Can anyone help me out?
Posted via Mobile Device

[Nanook]

There are no stock hooks for these trucks....

[BR3W CITY]

Honestly, I don't ever recall having hooks (or seeing a spot for them). My visors stay in place on their own.

[LostMy65]

None on mine either.
You could get some from a 67-72 truck.

[Macdaddy1]

Classic parts and Brothers sell the aftermarket ones.

[Black Momba]

They all start 1967 and up? Brothers too and it’s local in Cal.

[Black Momba]

There’s holes on the roof, on each side single hole where something goes there to hold them in place?

[Captainfab]

There were never any such thing from the factory for the '60-'66 trucks. The visors do not have the stub protruding to snap into any sort of hook or keeper.

[mfm3]

My wife found these magnetic hooks at Home Depot. The visors would constantly swing away from the window when I punched it. Problem solved...the magnets work great and are barely noticeable.

[LostMy65]

Nice!

[Black Momba]

Captain,Cool I’ll try it!

[Black Momba]

mfm3,The magnet worked great thank you!

[luvbowties]

Sounds like The Cap'n deserves a tip!
Sam

[northern 85]

Please tell the wifey, thank you very much,its a great idea!!

[Black Momba]

mfm3 deserves the credit, it was actually his idea! It is one strong magnet! $9.95 Home Depot.

[Railroader]

Good idea but for now I don't need hooks. My visor doesn't need to be stabilized when I "punch" the six cylinder. Anything on dash does not move either. Just smoooooth acceleration.

[Llay R. Rac]

one of mine was floppy, i removed the bracket and fixed it from the back by tightening the arm using a center punch to mash the metal where the arm swiveled, still good 30 + years later.

[ImpalaJim]

Originally Posted by Black Momba

mfm3 deserves the credit, it was actually his idea! It is one string magnet! $9.95 Home Depot.

I been coming back here to see if and when the proper person was patted on the back

Mine has 1 visor I like that but I cant find any repos with just 1 I don't want or need a spare

[Black Momba]

I got a brand new rebuilt 350 comp cam, new heads, ceramic headers, edelbrock carb, duralast intake, electronic ignition, a/c, new power brake master/booster, cable assist gas pedal.I need the hook because when I take off it moves my visor and now it won’t budge!
I got the passenger side but it’s not installed yet, having issues with the visor won’t cooperate and slide in?
Posted via Mobile Device

[The Rocknrod]

Originally Posted by Llay R. Rac

one of mine was floppy, i removed the bracket and fixed it from the back by tightening the arm using a center punch to mash the metal where the arm swiveled, still good 30 + years later.

I will have to remember that, hopefully I wont have to use it on a new set.

[mfm3]

Originally Posted by Black Momba

mfm3 deserves the credit, it was actually his idea! It is one strong magnet! $9.95 Home Depot.

Glad the magnetic hook idea has worked for some of you whose visors will not stay put. Nice find and idea by my wife.

[Pinchecharlie]

A little off topic and embarrassing but...I bought new arms and visors and I can not for the life of me slide the visor onto the dam@ thing! It is so tight !!! Any tips ? I've tried grease and light sanding. I'll bend something as is. After all I've done that was hard this is kinda silly lol

[Black Momba]

I had a heck of a time with mine? Driver side wasn’t too bad but I can’t get the pass on or off? It’s stuck half way in between.next time I’ll have the vendor “pre-install” it! I used light 3 in 1 oil on mine, applied with my finger tip.

[Android04]

Looks like I will be going to Home Depot after work.