The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-17-2009, 02:48 PM   #1
wavespy
Registered User
 
wavespy's Avatar
 
Join Date: Mar 2009
Location: Arvada, CO
Posts: 21
Question Auto column shift help!

Does anyone know where I can find a replacement for the levers at the lower end of the shift tube? This is from my '69 C20, and as you can see from the pics, it's badly worn from somebody being lazy when shifting. It won't lock in "PARK" and I'm afraid the truck might run me (or some innocent) down at the gas station!
Attached Images
  
__________________
Cameron
wavespy is offline   Reply With Quote
Old 04-17-2009, 04:56 PM   #2
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Re: Auto column shift help!

Thats probably due to a binding shifter tube rather than being lazy. If you were to grab the shift lever, it probably doesn't move forward and back very freely.
In all reality, your best bet, would be a replacement column. A good thing to do would be to update to a tilt/van tilt (light modifications needed). This upgrade would be double benificial, one, the tilt part is very nice, and 2, the shifter assembly inside is a betterr design that doesn't jam up like this one.
Longhorn Man is offline   Reply With Quote
Old 04-17-2009, 05:06 PM   #3
wavespy
Registered User
 
wavespy's Avatar
 
Join Date: Mar 2009
Location: Arvada, CO
Posts: 21
Re: Auto column shift help!

Yeah, it didn't move back and forth at all when I got it. I took it apart and cleaned/lubed everything and it functions much better. I don't really want to put a $500 column into a $2000 truck, but maybe that's the only option.
__________________
Cameron
wavespy is offline   Reply With Quote
Old 04-17-2009, 05:20 PM   #4
leddzepp
Moderator
 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 19,983
Re: Auto column shift help!

You can also find columns here on the board for sale that are non-tilt....on the cheaps Rob has one for $80 shipped right now: http://67-72chevytrucks.com/vboard/s...d.php?t=338163
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
leddzepp is offline   Reply With Quote
Old 04-17-2009, 05:23 PM   #5
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Re: Auto column shift help!

Unrestored truck tilts go for a LOT less, and van ones can be found on here for less than 100 from time to time, and honestly, I find them in the junkyards for 25 - 50 bucks on a regular basis... at least, last year when I had time for junk yards.
Longhorn Man is offline   Reply With Quote
Old 04-17-2009, 05:46 PM   #6
wavespy
Registered User
 
wavespy's Avatar
 
Join Date: Mar 2009
Location: Arvada, CO
Posts: 21
Re: Auto column shift help!

Thanks, I'll look around. I found one in a junkyard here in Denver yesterday, but it was as bad as mine. I'll keep looking.
__________________
Cameron
wavespy is offline   Reply With Quote
Old 04-17-2009, 08:05 PM   #7
tucnnuts
if they can make it so can I!
 
tucnnuts's Avatar
 
Join Date: Feb 2008
Location: birmingham, alabama
Posts: 97
Re: Auto column shift help!

could you not just weld it there and shape it back to stock?just thinkin....
tucnnuts is offline   Reply With Quote
Old 04-17-2009, 09:26 PM   #8
blazerbrian72
Registered User
 
blazerbrian72's Avatar
 
Join Date: Feb 2009
Location: Colorado and PA
Posts: 108
Re: Auto column shift help!

hey is that piece eazy to pull off? if so i have one on my blazer that im not using. i have the b&m shifter in it
blazerbrian72 is offline   Reply With Quote
Old 04-18-2009, 05:12 AM   #9
wavespy
Registered User
 
wavespy's Avatar
 
Join Date: Mar 2009
Location: Arvada, CO
Posts: 21
Re: Auto column shift help!

Quote:
Originally Posted by tucnnuts View Post
could you not just weld it there and shape it back to stock?just thinkin....
I have considered that. I don't have access to a welder, but I can probably find somebody around here who does.
__________________
Cameron
wavespy is offline   Reply With Quote
Old 04-18-2009, 05:16 AM   #10
wavespy
Registered User
 
wavespy's Avatar
 
Join Date: Mar 2009
Location: Arvada, CO
Posts: 21
Re: Auto column shift help!

Quote:
Originally Posted by blazerbrian72 View Post
hey is that piece eazy to pull off? if so i have one on my blazer that im not using. i have the b&m shifter in it
I don't know 'cause I haven't gotten mine apart yet. It seems that the single flange (where the linkage attaches) is welded on. The other piece is floating loose behind the spring, but I haven't figured out how to get it apart.
__________________
Cameron
wavespy is offline   Reply With Quote
Old 04-18-2009, 03:45 PM   #11
wavespy
Registered User
 
wavespy's Avatar
 
Join Date: Mar 2009
Location: Arvada, CO
Posts: 21
Cool Re: Auto column shift help!

Quote:
Originally Posted by blazerbrian72 View Post
hey is that piece eazy to pull off? if so i have one on my blazer that im not using. i have the b&m shifter in it
If you can get it off, I'll gladly take it off your hands.
__________________
Cameron
wavespy is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:35 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com