GA WTB: 1977 6 cyl monojet air cleaner, pipes, ducting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rainamy · 05-01-2017, 02:52 PM

Looking for the original style parts to put back on my 77 truck's 250 inline 6.

Uploaded a picture of what I'm hoping to find, maybe someone has all this sitting on their parts truck.

I'd like as complete as possible from the same source, including the little bracket that bolts to the manifold for the heat pipe, etc.

**old Rusty C10** · 05-01-2017, 07:52 PM

I believe I have the air cleaner and metal tube sitting in my shed they will need a good sanding and painting is that something youd be ok with if so ill get them out and photo for you

rainamy · 05-01-2017, 09:09 PM

Yes sir, I'd be interested in what I can get for now, even if it meant holding out for something better later.

The truck is getting a nos gm reman carb from 1982 and we'd like to be able to route the correct vacuum lines, including through the thermac, when it all gets installed. 80k mile "farm truck" and they removed all the factory stuff to put a 4" chrome aftermarket air filter, ripping away and plugging off stuff as they went.

rainamy · 05-19-2017, 07:54 PM

Still looking!

rainamy · 06-06-2017, 01:01 PM

Bump!

D13 · 06-06-2017, 02:03 PM

Hmmm. 1977 was integral head Monojet electric choke 1bbl. 1982 would have been the integral head 2bbl varijet, which takes a very different air cleaner set up. Unless you are putting an 82 Monojet from a 292 on your engine?

moregrip · 06-06-2017, 02:20 PM

Quote:

Originally Posted by rainamy

Looking for the original style parts to put back on my 77 truck's 250 inline 6.

Uploaded a picture of what I'm hoping to find, maybe someone has all this sitting on their parts truck.

I'd like as complete as possible from the same source, including the little bracket that bolts to the manifold for the heat pipe, etc.

I'll check my boxes this weekend and see what I have for ya!

rainamy · 06-06-2017, 02:41 PM

Quote:

Originally Posted by moregrip

I'll check my boxes this weekend and see what I have for ya!

Sorry for any confusion... the carb itself was remanufactured in 1982, but you are correct, it is the monojet, integrated head, original 1977 style setup that I need like what is in the picture.

If you have anything let me know, and thanks for taking a look!

moregrip · 06-19-2017, 03:29 PM

Quote:

Originally Posted by rainamy

Sorry for any confusion... the carb itself was remanufactured in 1982, but you are correct, it is the monojet, integrated head, original 1977 style setup that I need like what is in the picture.

If you have anything let me know, and thanks for taking a look!

Sorry brother, I checked my boxes over the weekend, no luck.

rainamy · 06-19-2017, 06:27 PM

Quote:

Originally Posted by moregrip

Sorry brother, I checked my boxes over the weekend, no luck.

Thanks for taking a look!

Meanwhile, still keeping an eye out for one of these if anyone has one.

rainamy · 07-06-2017, 04:25 PM

Still on the hunt for one of these

moregrip · 08-14-2017, 03:06 PM

http://67-72chevytrucks.com/vboard/s...93&postcount=3

rainamy · 02-15-2018, 09:46 PM

Bump.... still need one of these all this time later!

rainamy · 03-06-2018, 08:52 PM

Found the air cleaner!!!

Still interested if anyone has a not so pitted heat stove pipe for the thermal though, mine looks rough next to the new cleaner

05-01-2017, 02:52 PM	#1
rainamy Registered User Join Date: Jul 2014 Location: Rockdale Co. GA Posts: 165	WTB: 1977 6 cyl monojet air cleaner, pipes, ducting Looking for the original style parts to put back on my 77 truck's 250 inline 6. Uploaded a picture of what I'm hoping to find, maybe someone has all this sitting on their parts truck. I'd like as complete as possible from the same source, including the little bracket that bolts to the manifold for the heat pipe, etc. Attached Images

05-01-2017, 07:52 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,260	Re: WTB: 1977 6 cyl monojet air cleaner, pipes, ducting I believe I have the air cleaner and metal tube sitting in my shed they will need a good sanding and painting is that something youd be ok with if so ill get them out and photo for you __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-01-2017, 09:09 PM	#3
rainamy Registered User Join Date: Jul 2014 Location: Rockdale Co. GA Posts: 165	Re: WTB: 1977 6 cyl monojet air cleaner, pipes, ducting Yes sir, I'd be interested in what I can get for now, even if it meant holding out for something better later. The truck is getting a nos gm reman carb from 1982 and we'd like to be able to route the correct vacuum lines, including through the thermac, when it all gets installed. 80k mile "farm truck" and they removed all the factory stuff to put a 4" chrome aftermarket air filter, ripping away and plugging off stuff as they went.

05-19-2017, 07:54 PM	#4
rainamy Registered User Join Date: Jul 2014 Location: Rockdale Co. GA Posts: 165	Re: WTB: 1977 6 cyl monojet air cleaner, pipes, ducting Still looking!

06-06-2017, 01:01 PM	#5
rainamy Registered User Join Date: Jul 2014 Location: Rockdale Co. GA Posts: 165	Re: WTB: 1977 6 cyl monojet air cleaner, pipes, ducting Bump!

06-06-2017, 02:03 PM	#6
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: WTB: 1977 6 cyl monojet air cleaner, pipes, ducting Hmmm. 1977 was integral head Monojet electric choke 1bbl. 1982 would have been the integral head 2bbl varijet, which takes a very different air cleaner set up. Unless you are putting an 82 Monojet from a 292 on your engine? __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

07-06-2017, 04:25 PM	#11
rainamy Registered User Join Date: Jul 2014 Location: Rockdale Co. GA Posts: 165	Re: WTB: 1977 6 cyl monojet air cleaner, pipes, ducting Still on the hunt for one of these

08-14-2017, 03:06 PM	#12
moregrip Registered User Join Date: Dec 2008 Location: Las Vegas, NV Posts: 810	Re: WTB: 1977 6 cyl monojet air cleaner, pipes, ducting http://67-72chevytrucks.com/vboard/s...93&postcount=3 __________________ 1983 Chevy C10 250/3spd (current project truck) 1976 Chevy C10 350/350 Heavy Half (future project truck)

02-15-2018, 09:46 PM	#13
rainamy Registered User Join Date: Jul 2014 Location: Rockdale Co. GA Posts: 165	Re: WTB: 1977 6 cyl monojet air cleaner, pipes, ducting Bump.... still need one of these all this time later!

03-06-2018, 08:52 PM	#14
rainamy Registered User Join Date: Jul 2014 Location: Rockdale Co. GA Posts: 165	Re: WTB: 1977 6 cyl monojet air cleaner, pipes, ducting Found the air cleaner!!! Still interested if anyone has a not so pitted heat stove pipe for the thermal though, mine looks rough next to the new cleaner



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.