New project! The "Red Herring" - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JJorgensen52** · 04-19-2016, 10:37 AM

Quote:

Originally Posted by 7dee2

Hate to see Merle go but wow the new truck looks pretty clean sir!

Thanks! Lot of miles but a spotless southern truck underneath. It will be sad to send Merle on to a new home, but I can't save them all

I've been thinking and pondering a bit on my fuel fill, after looking at the piece of pipe installed in the frame, I think I may not box the inside of the rail there, but use a doubler plate on the outside instead. A little more fab work for me, but I think it will be cleaner, just as strong, and it won't restrict my access to various bolts and wiring running through that area.

**JJorgensen52** · 05-25-2016, 09:58 PM

Well, life happened. I'm transferring at work and that also means moving:

Only about 50 miles away from where I am now, but unfortunately the new place doesn't have a shop (yet

). So sadly, that means Red is going into storage for a bit.

But, this is the first time Red has been on all fours more or less fully assembled, and I took the opportunity to snap a few "stance shots" - I am quite happy with the way things are working out!

I'm already antsy to be working on it, so hopefully it won't be too long before I can get some shop space set up and go right back to wrenching!

**Advanced Design** · 05-26-2016, 07:38 AM

Well shoot JJ...wondered what you had been up to. Hopefully you will have a shop soon. What about the Buick?

**JJorgensen52** · 05-26-2016, 11:12 AM

Quote:

Originally Posted by Advanced Design

Well shoot JJ...wondered what you had been up to. Hopefully you will have a shop soon. What about the Buick?

It's going to be moving in just a few doors down from Red - in fact I'm loading it up tonight to take it over there tomorrow. I'm hopefully I'll have space to work again before September.

99 to Life · 05-26-2016, 11:53 PM

Moving sux for the most part. Been going through that myself. Hope you get back on it soon.

7dee2 · 06-11-2016, 01:33 PM

Hoping the move is going smoothly and your enjoying that new truck? Looking forward to more when your ready Jim.

slydogg76 · 12-29-2016, 03:49 PM

Great work! That looked like a wiring nightmare. I think I'll stick to a carburetor and no computer. Hope to see you back at it soon!

**JJorgensen52** · 01-13-2017, 01:32 AM

Hey all! Still no work on Red, I'm afraid. My new position at work takes up far more of my time than I would like, and I had a bunch of delays with the new shop building.

That said ... I've made my deposit and I've got a hard date for the building (steel kit) to be delivered in March!! With any luck I'll be back in the shop this summer

lower50's · 01-13-2017, 08:19 AM

That is so cool 32'X52' is a really nice size. Congrats

solidaxel · 01-13-2017, 08:43 AM

WOW a new hide out !!
Did you save enough for a lift?

99 to Life · 01-13-2017, 12:37 PM

woah thats a come up. I dream of the day I have room to move around, room to stay organized, heat and most importantly not a leaky roof. congrats.

**joedoh** · 01-13-2017, 04:58 PM

awesome! I am looking at buildings too (stick built) so I can get out of the driveway so I will pay attention. 32x52 is definitely a great size.

**Advanced Design** · 01-13-2017, 06:39 PM

Congrat's on the coming building! Nice size with 12 foot ceilings to boot. Looking forward to updates.....maybe a shop build thread over in the shop section?

ChuckDriver · 01-13-2017, 08:56 PM

Nice!

**JJorgensen52** · 01-14-2017, 12:20 AM

Quote:

Originally Posted by lower50's

That is so cool 32'X52' is a really nice size. Congrats

Quote:

Originally Posted by 99 to Life

woah thats a come up. I dream of the day I have room to move around, room to stay organized, heat and most importantly not a leaky roof. congrats.

Quote:

Originally Posted by joedoh

awesome! I am looking at buildings too (stick built) so I can get out of the driveway so I will pay attention. 32x52 is definitely a great size.

Quote:

Originally Posted by ChuckDriver

Nice!

Thanks guys!

Quote:

Originally Posted by solidaxel

WOW a new hide out !!
Did you save enough for a lift?

Yes, I made sure to leave room in the budget on this project for a lift and a new air compressor

Quote:

Originally Posted by Advanced Design

Congrat's on the coming building! Nice size with 12 foot ceilings to boot. Looking forward to updates.....maybe a shop build thread over in the shop section?

I hadn't thought of that, but I think I probably will do so! Once I get started, of course

7dee2 · 01-17-2017, 11:49 AM

Very nice, I'll 2nd or 3rd the shop build thread idea!

**JJorgensen52** · 06-26-2018, 09:11 PM

Hey fellas, look what I found!!

bowt1ed · 06-27-2018, 10:38 AM

Hey JJ, did you get your new building up?

Cheers, Jim (VB)

**JJorgensen52** · 06-27-2018, 12:23 PM

Quote:

Originally Posted by bowt1ed

Hey JJ, did you get your new building up?

Cheers, Jim (VB)

We are working on it. I have so many things going on right now, getting married, new job, etc ... So I haven't been working on it as much as I might. I do need to update that thread, too. I am remiss!

**JJorgensen52** · 07-16-2018, 02:14 AM

Red is home! Hopefully will find time to start figuring out where I left off in the next few weeks

Those of you who are also paying attention to the garage I was working on may notice this is most certainly not that garage. Long story short, the garage belongs to a friend (military and stationed out of the country) who's house I have been renting for over two years - but I just recently got married and have moved into a new place with an already finished garage. I will still be working on and using the other garage, it's about a half hour away. But, this new place means I can get back to trucks sooner!!

99 to Life · 07-16-2018, 11:07 AM

congrats

lower50's · 07-24-2018, 05:38 PM

Having you own work shop really helps.

**JJorgensen52** · 11-26-2018, 07:54 PM

Only a very small thing, but I did something on the truck and that's a big step up from the last two years.

Fitted the other tailgate latch

Hoping to get some more shop play time in the coming weeks.

**Advanced Design** · 11-26-2018, 10:52 PM

Good! One thing will lead to another, then another and....said the guy who has barely touched his since Jan ‘17...lol.

**JJorgensen52** · 01-07-2019, 12:20 AM

Just a quick update, got a few hours this afternoon to play in the garage ... last few free days were taken up pulling the motor out of my Impala

... and started building a new trans cover. Got a ways to go, but it's a start!

05-25-2016, 09:58 PM	#502
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: New project! The "Red Herring" Well, life happened. I'm transferring at work and that also means moving: Only about 50 miles away from where I am now, but unfortunately the new place doesn't have a shop (yet ). So sadly, that means Red is going into storage for a bit. But, this is the first time Red has been on all fours more or less fully assembled, and I took the opportunity to snap a few "stance shots" - I am quite happy with the way things are working out! I'm already antsy to be working on it, so hopefully it won't be too long before I can get some shop space set up and go right back to wrenching! __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

05-26-2016, 07:38 AM	#503
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: New project! The "Red Herring" Well shoot JJ...wondered what you had been up to. Hopefully you will have a shop soon. What about the Buick? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

05-26-2016, 11:53 PM	#505
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: New project! The "Red Herring" Moving sux for the most part. Been going through that myself. Hope you get back on it soon. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

06-11-2016, 01:33 PM	#506
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,891	Re: New project! The "Red Herring" Hoping the move is going smoothly and your enjoying that new truck? Looking forward to more when your ready Jim. __________________ Brett 67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594 72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.) 72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614 YouTube: https://www.youtube.com/@6dee7-7dee2

12-29-2016, 03:49 PM	#507
slydogg76 Registered User Join Date: Jun 2005 Location: New Hampshire Posts: 86	Re: New project! The "Red Herring" Great work! That looked like a wiring nightmare. I think I'll stick to a carburetor and no computer. Hope to see you back at it soon!

01-13-2017, 01:32 AM	#508
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: New project! The "Red Herring" Hey all! Still no work on Red, I'm afraid. My new position at work takes up far more of my time than I would like, and I had a bunch of delays with the new shop building. That said ... I've made my deposit and I've got a hard date for the building (steel kit) to be delivered in March!! With any luck I'll be back in the shop this summer Attached Images __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder) Last edited by JJorgensen52; 01-13-2017 at 01:39 AM.

01-13-2017, 08:19 AM	#509
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: New project! The "Red Herring" That is so cool 32'X52' is a really nice size. Congrats __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

01-13-2017, 08:43 AM	#510
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: New project! The "Red Herring" WOW a new hide out !! Did you save enough for a lift? __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

01-13-2017, 12:37 PM	#511
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: New project! The "Red Herring" woah thats a come up. I dream of the day I have room to move around, room to stay organized, heat and most importantly not a leaky roof. congrats. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

01-13-2017, 04:58 PM	#512
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,747	Re: New project! The "Red Herring" awesome! I am looking at buildings too (stick built) so I can get out of the driveway so I will pay attention. 32x52 is definitely a great size. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

01-13-2017, 06:39 PM	#513
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: New project! The "Red Herring" Congrat's on the coming building! Nice size with 12 foot ceilings to boot. Looking forward to updates.....maybe a shop build thread over in the shop section? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-13-2017, 08:56 PM	#514
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,622	Re: New project! The "Red Herring" Nice! __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

01-17-2017, 11:49 AM	#516
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,891	Re: New project! The "Red Herring" Very nice, I'll 2nd or 3rd the shop build thread idea! __________________ Brett 67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594 72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.) 72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614 YouTube: https://www.youtube.com/@6dee7-7dee2

06-26-2018, 09:11 PM	#517
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: New project! The "Red Herring" Hey fellas, look what I found!! Attached Images __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

06-27-2018, 10:38 AM	#518
bowt1ed Registered User Join Date: Apr 2011 Location: Virginia Beach, VA Posts: 494	Re: New project! The "Red Herring" Hey JJ, did you get your new building up? Cheers, Jim (VB)



Register or Log In To remove these advertisements.

07-16-2018, 02:14 AM	#520
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: New project! The "Red Herring" Red is home! Hopefully will find time to start figuring out where I left off in the next few weeks Those of you who are also paying attention to the garage I was working on may notice this is most certainly not that garage. Long story short, the garage belongs to a friend (military and stationed out of the country) who's house I have been renting for over two years - but I just recently got married and have moved into a new place with an already finished garage. I will still be working on and using the other garage, it's about a half hour away. But, this new place means I can get back to trucks sooner!! Attached Images __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

07-16-2018, 11:07 AM	#521
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: New project! The "Red Herring" congrats __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

07-24-2018, 05:38 PM	#522
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: New project! The "Red Herring" Having you own work shop really helps. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

11-26-2018, 07:54 PM	#523
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: New project! The "Red Herring" Only a very small thing, but I did something on the truck and that's a big step up from the last two years. Fitted the other tailgate latch Hoping to get some more shop play time in the coming weeks. Attached Images __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

11-26-2018, 10:52 PM	#524
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: New project! The "Red Herring" Good! One thing will lead to another, then another and....said the guy who has barely touched his since Jan ‘17...lol. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-07-2019, 12:20 AM	#525
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: New project! The "Red Herring" Just a quick update, got a few hours this afternoon to play in the garage ... last few free days were taken up pulling the motor out of my Impala ... and started building a new trans cover. Got a ways to go, but it's a start! Attached Images __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

Register or Log In To remove these advertisements.